TELTONIKA TSW202 Managed PoE Switch Instruction Manual
- August 17, 2024
- teltonika
Table of Contents
TELTONIKA TSW202 Managed PoE Switch
Specifications
-
Bandwidth (Non-blocking): 20 Gbps
-
Packet buffer: 512 KB
-
MAC address table size: 8K entries
-
Jumbo frame support: 10000 bytes
-
RAM: 128MB, DDR3
-
FLASH storage: 16MB serial flash
-
Input voltage range: 7 – 57 VDC
-
Input voltage range for PoE: 44 – 57 VDC
-
Power consumption: Idle: < 3 W / Max: 8 W / PoE Max: 240 W
-
Casing material: Anodized aluminum housing and panels
-
Dimensions (W x H x D): 132 x 44.2 x 122.2 mm
-
Weight: 610 g
-
Operating temperature: 10 % to 90 % non-condensing
-
Ingress Protection Rating : IP30
-
Regulatory: CE, CB, RCM, FCC, IC,EAC, UCRF
HARDWARE
RJ45 LED MEANING
FEATURES
WHAT’S IN THE BOX
STANDARD PACKAGE CONTAINS
- TSW202
- QSG (Quick Start Guide)
- Packaging box
STANDARD ORDER CODES
- PRODUCT CODE: TSW202 000000
- HS CODE: 851762
- HTS CODE: 8517.62.00
- PACKAGE CONTAINS: Standard package
For more information on all available packaging options – please contact us directly.
TSW202 SPATIAL MEASUREMENTS & WEIGHT
MAIN MEASUREMENTS
- W x H x D dimensions for TSW202:
- **Device housing*** : 132 x 44.2 x 122.2 mm
- Box: 125 x 136x 47 mm
Housing measurements are presented without screws; for measurements of other device elements look to the sections below.
TOP VIEW
The figure below depicts the measurements of TSW202 and its components as
seen from the top:
RIGHT VIEW
The figure below depicts the measurements of TSW202 and its components as
seen from the right side:
FRONT VIEW
The figure below depicts the measurements of TSW202 and its components as
seen from the front panel side:
REAR VIEW
The figure below depicts the measurements of TSW202 and its components as
seen from the back panel side:
MOUNTING SPACE REQUIREMENTS
The figure below depicts an approximation of the device’s dimensions when cables are attached:
Copyright © 2023, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.
FAQ
- Q: What is the maximum Ethernet cable length supported by the TSW202?
- A: The TSW202 supports a maximum Ethernet cable length of 100 meters.
- Q: What are the regulatory approvals for the TSW202?
- A: The TSW202 has regulatory approvals including CE, CB, RCM, FCC, IC, EAC, and UCRF.