deli T051,T053 Paper Shredder User Manual
- August 17, 2024
- DELI
Table of Contents
deli T051,T053 Paper Shredder
USER MANUAL
Paper Shredder
Thank you for purchasing our product. This shredder is suitable for personal
as well as office department use. We believe the shredding capabilities and
confidentiality level of this series of shredders will enable you to dispose
your documents in a more efficient manner.
Please read this manual carefully before use. in order to facilitate proper
use of this product. as well as to prevent damage to people and property.
The Table Of Toxic And Hazardous
Substances/Elements And Their Content
**Part name| Lead [Pb)| Mercury [Hg)| Cadmium [Cd)|
Hexavalent Chromium [Cr)| Polybrominated biphenyls [PBB)|
Polybrominated Dimethyl Ether [PBDE)
---|---|---|---|---|---|---
Housings| 0| 0| 0| 0| 0| 0
wastebasket| 0| 0| 0| 0| 0| 0
Motor| X| 0| 0| 0| 0| 0
Core| 0| 0| 0| 0| 0| 0
Cables| X| 0| 0| 0| 0| 0
Circuit board| X**| 0| 0| 0| 0| 0
Print| 0| 0| 0| 0| 0| 0
Packaging materials
T
| 0| 0| 0| 0| 0| 0
His table is prepared in accordance with the provisions of SJ/T 11364.
0: lndicates that this toxic or hazardous substance contained in all of
the homogeneous materials for this part is below the limit requirement in GB/T
26572. x: Indicates that this toxic or hazardous substance contained in at
least one of he homogeneous materials used for this part is above the limit
requirement in GB/T 26572(Due to technical or economic reason. these toxic or
hazardous ubstances cannot be replaced or reduced for now.).
Warnings And Precautions
The plug on the power supply cord is intended to serve as the disconnect
device, the socket-outlet shall be installed near the equipment and shall be
easily accessible.
The appliance shall be connected to a MAINS socket outlet with a protective
earthing connection.
Please place the shredder on a flat and level surface. to avoid from
malfunction caused by tipping over.
- Do not shred tapes. copy papers. fabrics or plastic films. to avoid equipment failure.
- Warning! Do not damage or process the power cord or place objects on the power cord. to avoid a fire or electric shock.
- In case of smoke. odor or other abnormal conditions. please turn off the power switch immediately and stop using to avoid a fire or electric shock.
- Do not use the laminator if the machine or power cord is damaged. to avoid a fire or electric shock.
Product Specification
Product number | T05l | T053 |
---|---|---|
Power supply | AC 230V/50Hz | AC 230V/50Hz |
Shred type | Cross-cut | Cross-cut |
Shred size(mm) | 4×25 | 4×30 |
Shred cos or DVDs | I | I |
Shredding capacity (70g, A4) (sheet) | 8 | 16 |
Shredding speed (m/min) | 12 | 11.6 |
Poper feed slot width(mmJ | 220 | 220 |
CD/DVD feed slot width(mm) | I | I |
Wastebasket capacity[LJ | 16 | 23 |
Product dimensions (mm) | 315xl95x356 | 350x250x550 |
Noise(dBJ | a □ | a □ |
Net weight(kg) | 7.B3 | 9.2 |
Canbnuous run time ( min ) | lD | lD |
*Test data from Deli lab. changes of the test environment and tools may cause deviations.
Packing List
Please check the intact of equipment and inventory all accessories. Please contact the dealer for any defect and/or missing of accessory.
# | Nome | Quantity | Remark |
---|---|---|---|
Poper Shredder | lx | ||
2 | User Manual | lx | |
3 | Coster Wheel | 4x | Put in the wastebasket |
Product Diagram
- Paper feed slot
- Handle
- Visible window
- Wastebasket
- Power switch button
- Forward
- Reverse
This diagram is for reference only please take the actual product as standard (Shred type varies among different product number)
Maintenance
- Unplug the power cord prior to maintenance;
- Maintenance is limited to the cleaning of external ports only;
- When cleaning the external ports, caution must be token not to drip any water droplets into the interior of the shredded
Note: When cleaning the outer cosing of the shredder, please gently wipe with a soft cloth slightly damped with soapy water or detergent Caution not to let the cloth enter into the feed slot and do not use solvents such as gasoline, benzene. point thinner and detergent.
Step-by-step Instructions
- Switch on the 23OV power supply in accordance with the voltage specifications of your equipment.
- Press the power switch button ” I ” on the bock of the shredder, the indicator will turn green, which means you may start to use the shredder. The shredder will stop the shredding process automatically till you activate the next shredding operation. Upon the completion of shredding operation, please press the power switch bottom ” 0 ” to turn off the unit.
- If you wont to stop the file being shredded, press the manual eject switch “Reverse· button, the shredder will immediately (2~3 seconds) reverse and eject your file.
- If a “jam” condition occurs due to excessive amount of paper, the red indicator will prompt the status, and automatically reverse to eject the jammed paper and stop the operation automatically. Once you toke out the jammed paper, the indicator will turn green again and will be automatically reactivated by the next shredding operation. If the shredder foils to eject the paper automatically, press the manual “Reverse” button to eject the excess pope[ If the jammed paper is too short to be removed by hand, you con also use the “Forward” button to break the paper to clear the jamming.
- Shredding excessive amount of paper will result in overheated motor issue, and the shredder will stop automatically (which is the uniquely designed automatic protection function to protect the motor from overheating). After the automatic shutdown. the shredder will resume working ofter around SO-minutes cool down period.
Troubleshooting
Problem | Potential causes | Solution |
---|---|---|
The equipment is not functioning | The plug is not plugged in, no power | Push |
the plug into the socket thoroughly
Voltage of the power is too low| ****
Provide rate working voltage
The wastebasket has not been pushed into the predetermined position| Push the
wastebasket into the predetermined position
The equipment is overheated and entered into protection mode due to prolonged
use| Wait for a while till the equipment is cooled down
Poper is too thin or too soft
| Add a thicker paper or fold the
paper multiple time to increase the thickness
The wastebasket bucket is full| Clean the wastebasket
Overload issue hos not been resolved| Reduce the pages of paper and reload the
paper into the feed slot
The shredder is stalled| **** Poper jam| Press the “Reverse” bottom to eject
the jammed paper
The shredder motor will not stop running| The feed slot is covered with paper
dust and other foreign
matter
| ****
Clean up the feed slot area
Operating noise is too loud| Equipment has been put on hallow or unleveled floor| Adjust the placement of the machine
Note
If there is a malfunction condition that can’t be troubleshoot through the
above method, please stop using the shredder immediately, unplug the power
cord and notify the local service unit for service, please don’t attempt to
disassemble the unit by yourself!
Recycling
Be sure to send used and waste electronics and packaging materials to a special recycling site to prevent uncontrolled waste disposal and facilitate material recycling.
WARRANTY CARD
Thank you for your purchase of our products. The interests of customers who
purchase our products will be
protected. For any malfunction due to product quality problems. please contact
authorized local dealers or service centers with this receipt and the warranty
card.
Warranty terms
- For product failures occur under normal operating circumstances, free of charge repair and spare parts 2. Customers are required to present this warranty card and the original purchase invoice to our company upon request for warranty service.
- This warranty card shall be valid only after the following form is filled out in detail and affixed with official seal of the dealer.
- No free of charge repair service shall be provided in the event of any of the following circumstances:
- Expiration of the warranty period;
- Damages caused by improper use, maintenance or storage not in accordance with the requirements of the user.
- Failure or damage resulting from unauthorized disassembly, repair or modification;
- Failure or damage caused by force majeure;
- wear parts or accessories.
This warranty card is being delivered with the product, one card for one product. Please keep this warranty card in proper condition for free warranty service. There is no replacement if lost.
Date of Purchase
Product Information| Product Nome| | Serial Number|
---|---|---|---|---
Product Model
Number
| | Manufacturing
Dote
|
Customer Information| Company Nome| | contact|
Address| | Phone|
Soles Information
| Dealer Nome| | Contact|
Address| | Phone|
Dote of Purchase| | Invoice No.|
Maintenance Record
| Description of
Malfunction
| Maintenance
Results
| Customer
Signature
| Maintenance
Technician Signature
| Maintenance
Dote
| | | |
| | | |
| | | |
This copy shall be cut along the dotted line and kept by the dealer.
Product Information| Product Nome| | Serial Number|
---|---|---|---|---
Product Model
Number
| | Manufacturing
Dote
|
Customer Information| Company Nome| | Contact|
Address| | Phone|
Soles Information
| Dealer Nome| | contact|
Address| | Phone|
Date of Purchase| | Invoice No.|
Maintenance Record
| Description of
Malfunction
| Maintenance Results| Customer Signature| Maintenance Technician Signature|
Maintenance Dote
| | | |
| | | |
| | | |
Special Disclaimer
While information of this manual has been rigorously checked and reviewed, we still cannot rule out the possibility of spelling mistakes and technical negligence and/or errors. Such negligence and/or errors will be corrected in the updated version(s) without further notice. The intellectual property of this manual belongs to our company, and no organization or individual is allowed to change the content.
CERTIFICATE
Inspector: ____ _
Date of Manufacture: ____
DELI GROUP CO., LTD.
301 Xuxiake Ave. Ninghai County
Ningbo 315600 China Made in China
info@nbdeli.com
www.deliworld.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>