renkforce DAB/DAB Windscreen Antenna Instruction Manual

renkforce DAB/DAB Windscreen Antenna Instruction Manual

Operating instructions DAB/DAB+ windscreen antenna Item no. 3048907

Downloading the operating instructions

You can download the complete operating instructions (or new/updated versions if available) by using the link www.conrad.com/downloads or by scanning the QR code. Follow the instructions on the website.

Intended use

The DAB windscreen antenna receives digitally broadcast DAB radio signals. Using the product for purposes other than those described above may damage the product. Improper use can result in short circuits, fires, or other hazards.
This product complies with statutory national and European regulations. For safety and approval purposes, you must not rebuild and/or modify the product
Read the operating instructions carefully and store them in a safe place. Always provide these oper- ating instructions when giving the product to a third party.
All company and product names contained herein are trademarks of their respective owners. All rights reserved.

Delivery content

< DAB windscreen antenna  < Operating instructions

Description of symbols

This symbol warns of hazards that can lead to personal injury or property damage.

Safety instructions

Read the operating instructions carefully and adhere in particular to the safety instructions. If you do not follow the safety information and information on proper handling in these operating instructions, we will assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

General information

• This product is not a Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a dangerous plaything for
• Should you have any questions or concerns after reading this document, please contact our technical support or a professional technician.
• Maintenance, modifications and repairs must only be carried out by a technician or a specialist

repair centre.

Handling

• Please handle the product carefully. Jolts, impacts or a fall, even from a low height, can damage the

Operating environment

• Do not expose the product to any mechanical
• The product must not be exposed to extreme temperatures exceeding the technical specifica- tions, strong shocks, flammable gases, vapours and solvents.
• Avoid using the product near strong magnetic or electromagnetic fields, transmitter aerials or HF

generators. Otherwise, the product may not function properly.

Operation

• Consult an expert when in doubt about the operation, safety or connection of the
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorised DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
  • is visibly damaged,
  • is no longer working properly,
  • has been stored in poor ambient conditions for extended periods or
  • has been subjected to any serious transport-related

Installation

• The antenna should be mounted vertically within the upper corner of the windscreen and A-pillar (at the top right from the driver’s perspective). It should be installed at least 7-10 cm away from the windscreen frame.
• Peel off the protective film and attach the antenna such that the cable can be concealed under- neath the vehicle
• Once attached, the antenna should not be subject to any mechanical strain for 24

Electrical connection

• The connecting cable must be guided to the car
• Insert the antenna plug into the car radio’s DAB antenna
• If your car radio has a different antenna connection, use a suitable adaptor available in specialist

Cleaning and maintenance

Wipe the housing with a dry or slightly damp cloth.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non- destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):

• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Technical data

Reception range…………………. 174 – 237 MHz / 470 – 958 MHz / UHF 13-68 CH
Antenna cable length……………… approx. 3 m
Standard connector…………….. SMB female
Dimensions…………………….. 115 x 21 x 5 mm
Ambient conditions……………. .. -30 to +85 °C / 10-90% relative humidity

Read More About This Manual & Download PDF:

References

• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>