DONGGUAN A-H13 Smart Wristband User Guide
- August 23, 2024
- Dongguan
Table of Contents
A-H13 Smart Wristband
smart wristband
user’s Guide
Wear it properly
The bracelet is best worn afer the ulnar styloid
Adjust the size of the wrist according to the adjustment hole; buckle the
wrist strap buckle.
The sensor should be close to the skin to avoid moving
Charge the bracelet
Use it for the first time to ensure that the battery is in normal condition.
If the power is not turned on normally, please connect the charger to
charge the device.
Install the bracelet app on your phone
Scan the QR code or go to the App Store, app download and install the
app.
Android/IOS
System requirements: Android 5.0 and above; iOS9.0 and above; support
for Bluetooth 4.0.
Device connection
-
For the first use, you need to connect the APP for calibration. After
the connection is successful, the bracelet will automatically
synchronize the time. -
Turn on the Bluetooth switch of the mobile phone system → enter
the app device module settings → click “Bind device, experience
more features” to enter, it will automatically search for nearby
Bluetooth devices on the bracelet, find and connect the bracelet
device. -
After the pairing is successful, the APP will pop up a guide page.
According to the instructions, jump to the mobile phone system
Bluetooth search After the pairing is successful, the APP will pop up a guide page.
According to the instructions, jump to the mobile phone system
Bluetooth search to find the H13/Y13/WellAudio/H13Mini/H13Pro/H13PLUS
/GTS4/HB13mini/HB13/L10/L20/H15/121PLUS/D16A/D22/D23/D25/H16
/H18/H19/H20 device and connect it.
After the connection is successful, you can make / receive calls and listen
to music (Note: If the mobile phone system Bluetooth has not been
searched equipment, please enter the Dual mode menu
and set it to On, you cannot make calls without connecting the equipment.) -
APP will automatically save the Bluetooth address of the bracelet,
and the APP will open and run in the background, and will
automatically search and connect the bracelet; -
Android phones use all notificafion permissions to read contact
information and give the app background running in the phone settings.
Bracelet function description -
Slide down the standby page to enter the no?fica?on reminder, and
slide up to enter the control center -
Swipe lebel or right on the standby page to cycle through the dials
-
Long press 2 seconds on any dial page to start the language
assistant. (Remarks: The mobile phone also needs to be connected to
the device, and the smart phone needs to set the us er’s
voice in advance in the voice menu) -
Click the screen on the standby page to enter the main menu, the
style of the main menu can be switched -
Bracelet reset device This function will clear all data of the bracelet
(such as step counting) -
Switch to the heart rate three-in-one interface to start the test, heart
rate three-in-one interface 60s timeout automatically off screen
(heart rate and blood pressure need bracelet hardware support).
Clock interface
After synchronizing with the phone, the bracelet will automatically
calibrate the time;
Swipe left or right on the standby page to cycle through the dials
Step
Number of steps
Wear the bracelet and record the number of daily movement steps to
view the current real-time steps.
distance
The distance of motion is estimated based on the number of walking
steps.
Calories
Estimate the calories burned based on the number of walking steps
Heart rate, blood pressure, blood oxygen three-in-one
After entering the heart rate three-in-one test interface for a few
seconds, the current heart rate, blood pressure, and blood oxygen test
results are displayed. This feature requires a wristband to support heart
rate and blood pressure sensors.
dial
Dial pad for making calls (note: the phone also needs to be connected to a
device)
phone book
Add 8 commonly used contacts in the APP. After the bracelet is
successfully connected with the APP Bluetooth, the contacts can be
displayed in the bracelet phone book. Click the contact to make a call
(Note: The phone needs to be connected to a device)
Music control
The bracelet can control the previous song and the next song, and pause
/ start playback. (Note: devices need to be connected to use
this feature phone)
Dual mode switch
This switch needs to be turned on for the phone to search for the
device. If the phone is not connected to the device
within 5 minutes after the bracelet is turned on, the switch will be
turned off automatically, and it needs to be turned on manually when it
is used again.
exercise more
All sports modes can record the calories and duration of skipping rope.
Sleep mode
When you fall asleep, the bracelet will automatically enter the sleep
monitoring mode; automatically detect your deep sleep / light sleep /
wake up all night, calculate your sleep quality; the wristband only shows
the total length of deep sleep / light sleep / sleep, APP end can View
sleep data details.
Note: Sleep data will be available when you wear your wristband and
sleep will be detected from 10:00 pm. Sleeping data for 3/4 hours can be
synchronized to the app while sleeping.
Information mode
Information menu can view the latest news content
Stopwatch function
Enter the stopwatch and click the start button to start timing, click the
pause button to stop, and click the reset button to clear the timing.
Custom dial
You need to connect to the APP to get the dial settings, you can choose
the recommended dial / default dial / album custom dial to synchronize
to the bracelet.
APP function and settings
Personal information
Please set your personal information after entering the app.
Settings → Personal Information, you can set gender – age – height –
weight – distance
You can also set your daily goal steps to monitor daily completions.
Application push
SMS notification:
In the connected state, if the SMS reminder function is enabled, the
bracelet will vibrate when there is a text message.
Other reminders:
In the connected state, if this function is enabled, when there are
messages such as WeChat, QQ, Facebook, etc., the bracelet will vibrate
to remind and display the content received by the app (You need to give
the APP permission to get system notifications, and the wristband can
display 20-40 words).
Note: Incoming call reminder system is enabled by default, no switch
option (calls for incoming calls need to be connected to device)
Other functions:
Turn on the vibration setting function, when there are calls, messages or
other reminders, the bracelet will vibrate. If it is off, the bracelet will
only
have a screen reminder without shaking to avoid interruption.
Tips for Android users:
When using the reminder function, you need to set it to allow “FitPro” to
run in the background; it is recommended to add “FitPro” to the rights
management and open all permissions.
Alarm settng
In the connected state, 8 alarms can be set. After setting, it will be
synchronized to the bracelet; offline alarm is supported. After the
synchronization is successful, even if the APP is not connected, the
bracelet will be reminded according to the set time.
Looking for a bracelet
In the connected state, click the “Look for the bracelet” option and the
bracelet will vibrate.
Remote photography
In the connected state, start the photo from the wristband or the APP to
enter the remote camera interface, shake/turn the wrist/touch the
bracelet, and automatically take a photo after 3 seconds of counting
down. Please allow the APP to access the photo album to save the
self-portrait photo.
Sedentary reminder
Set whether to enable the sedentary reminder function, you can set the
reminder interval, if you sit for a long time in the set time, the bracelet
will remind you.
Raise your hand to brighten
Turn this function on. When the wristband is in the state of the screen,
lift your wrist and turn the screen to yourself to light up the screen.
Do not disturb mode
Turn on the Do Not Disturb mode. You can set the Do not disturb time
period. During the set time period, the bracelet stops receiving
notification messages to avoid reminding messages.
Device reset
Setting this feature reset will erase all data in the bracelet (such as step
counting)
Remove device
Remove device This feature will erase data and remove device
Basic parameters
Equipment
type
|
smart
wristband
|
type of battery
|
Lithium polymer
---|---|---|---
Vibration
motor
|
stand by
|
Synchronously
|
Bluetooth 4.0
Operating
temperature
|
-10°C~50°C
|
sensor
|
Low power acceleration sensor
System
Requirements
|
IOS9 or above / Android5.0 or above
Precautions
1. Bathing and swimming should not be worn.
2. Please connect the bracelet when synchronizing data.
3. Use the included charging cable to charge.
4. Do not expose the handle ring to moisture for a long time,
where the temperature is extremely high or extremely low.
5. The flashover of the wristband restarts. Please check the
memory information of the mobile phone to clear it and try
again, or exit the APP and reopen it.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable
protection againstharmful interference in a residential installation. This
equipment generates,
uses and can radiateradio frequency energy and, if not installed and used in
accordance with
the instructions, maycause harmful interference to radio communications.
However, there
is no guarantee thatinterference will not occur in a particular installation.
If this
equipment does cause harmfulinterference to radio or television reception,
which can be
determined by turning the equipmentoff and on, the user is encouraged to try
to correct the
interference by one or more of thefollowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer
could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two
conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any
interference received, including interference that may cause undesired
operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled
environment. This equipment should be installed and operated with minimum
distance 0cm
between the radiator and your b