BAUHN AFTC3-0424 3 In 1 Wireless Charger User Manual
- August 15, 2024
- BAUHN
Table of Contents
BAUHN AFTC3-0424 3 In 1 Wireless Charger
Product Information
Technical Specifications:
- Size: 24.7 x 7.45 x 7.5 CM
- Material: ABS + Silicon
- Interface: USB-C
- Input: 5V/3A 9V/3A
- Output: 15W/10W/7.5W/5W max for mobile phone, 2.5W max for Smartwatch, 5W max for Bluetooth earbuds
Standard Accessories:
- 1* 3-in-1 wireless charger
- 1* Type C charging cable
- 1* User manual
Product Usage Instructions
Charging Instructions:
- Connect the device to the power supply using the provided charging cable.
- Place each device (mobile phone/iWatch/Bluetooth earbuds) in their respective charging area on the charger to start the charging process.
- Once fully charged, remove each device from the charger. If you need to stop charging, simply take off the device.
Frequently Asked Questions
- Q: What devices are compatible with the charger?
- A: The charger is compatible with mobile phones, smartwatches, and Bluetooth earbuds that support wireless charging.
- Q: Can I charge multiple devices simultaneously?
- A: Yes, you can charge multiple devices at the same time by placing them in their respective charging areas on the wireless charger.
- Q: Is it safe to leave devices on the charger after they are fully charged?
- A: It is safe to leave devices on the charger after they are fully charged as the charger is designed to stop charging once the devices reach full capacity.
PRODUCT OUTLINE
Technical Specifications
- Size: 24.7 x 7.45 x 7.5 CM
- Material: ABS + Silicon
- Interface: USB-C
- Input: 5V/3A 9V/3A
Output:
- 15W/10W/7.5W/5W max for mobile phone
- 2.5W max(Smartwatch)
- 5W max (Bluetooth earbuds)
Standard Accessories
- 1* 3-in-1 wireless charger
- 1* type C charging cable
- 1* User manual
How to charge
- Connect the device to the power supply through the charging cable, and then it can be powered on.
- When charging any of the mobile phone/watch/Bluetooth earbuds, place each in their respective charging area to start charging.
- After fully charging, simply take off each device during the charging process. If you need to terminate the charging, take it directly.
Important notes
- Please put the mobile phone/watch/Bluetooth earbuds at the center of the charge area. For watch, place at vertical charging at 90 degrees. Do not select 30 degrees, as charging may not be possible at this angle.
- Don’t charge in high temperatures and humid environments to avoid damage of the circuit. Using the Environment temperature remains 1-45℃ degree. Keep the charger away from water or other liquid.
- Recommended to use the supplied charging cable for the power supply.
- If you need to clean the charger, please make sure it is powered off.
FCC Statement
FCC INSTRUCTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.”
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Distributed by:
- ALDI Inc.
- Batavia, IL 60510
- www.ALDI.us
- Contact: info@xtremetime.com
- (US)1-888-204-0934
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm the radiator your body: Use only the supplied antenna.