tnb CBBOUNCEXX Bluetooth Headset Instructions

tnb CBBOUNCEXX Bluetooth Headset

Product Information

Product Specifications:

• Model: OTICE_CBBOUNCExx
• Date: 14/01/2024
• Time: 23:4

Product Usage Instructions

1. Unpacking and Setup:
   When you receive the product, carefully unpack it and inspect it for any damages. Follow the included setup instructions to assemble the product correctly.

2. Powering On the Device:
   Locate the power button on the device and press it to turn on the product. Ensure that the device is connected to a power source if required.

3. Navigating the Interface:
   Use the provided user manual to familiarize yourself with the product’s interface. Navigate through the menus and settings to customize the product according to your preferences.

4. Product Maintenance:
   Regularly clean the product using a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials that may damage the product’s surface.

Frequently Asked Questions (FAQ):

• Q: How do I reset the device to factory settings?
  A: To reset the device to factory settings, navigate to the settings menu, locate the reset option, and follow the on-screen instructions. Note that this action will erase all data stored on the device.

• Q: Can I use third-party accessories with this product?
  A: It is recommended to use accessories that are approved for use with this product to avoid compatibility issues or damage. Refer to the user manual for a list of compatible accessories.

Congratulations on your purchase and thank you for the trust you have placed in T’nB. Our products comply with all relevant regulations and standards. Before using this equipment, we recommend that you read the instructions and safety instructions carefully and keep this manual for future reference.

IMPORTANT SAFETY INSTRUCTIONS

• No guarantee will apply in case of misuse.
• T’nB accepts no liability if the safety instructions are not respected.
• Handle the device with care.
• The power supply of your device must match the initially specified characteristics
• The socket of the electrical equipment must be located near the said equipment and easy to get to.
• Keep the device away from flammable objects, explosive substances, or dangerous objects.
• Use and store your device in an environment where the temperature is between 0°C and 35°C.
• Store your device out of the reach of children.
• This device is not designed to be used by persons (including children) whose physical, sensory, or mental capacities are reduced, or persons without experience or knowledge, except if they are supervised or receive prior instruction on using the device by a person in charge of their safety.
• Do not disassemble your device and do not attempt to repair or modify it yourself.
• Stop using your device if it has been hit or damaged.
• To avoid the risk of electric shock, disconnect your device from the mains and any other device before cleaning it or when not in use.
• Only use the supplied accessories and connectors. The use of any other type of accessory not intended for this purpose may irremediably damage your device.
• Make sure the appliance is switched off and cold before cleaning. Do not use any product or lubricant which may damage the appliance.
• T’nB accepts no liability for damage caused by misuse of the product or by use of an incompatible electrical device.
• Unless otherwise stated, never use your device in rain, in damp places, or near a water source.
• Unless otherwise stated, this product is for indoor use only.
• Do not leave wireless products near credit cards or other data storage devices.
• Avoid using your wireless devices near sources of interference, such as power supply cables, microwave ovens, fluorescent lamps, wireless video cameras, and wireless domestic telephones.
• To improve the quality and the strength of the wireless signal, reduce the number of devices operating on the same wireless frequency.
• Switch off the helmet/earphones after use and tidy it/them away in a suitable place to avoid damage, scratches, and warping.
• Do not set the volume to a high level before switching on the product. Slowly increase the volume to avoid damage caused by a high volume.
• Do not use the helmet/earphones in a dangerous place or in a location where you cannot hear outdoor sounds.
• Do not leave the device on charge unattended. In the event of a short circuit or mechanical damage to the internal lithium battery, there is a risk of overheating or fire.
• WARNING: risk of explosion if the battery is replaced with an inappropriate model. Recycle used batteries under current regulations.
• Please fully charge before using it the first time.

DESCRIPTION

1. ON/OFF
2. Mode
3. Volume –
4. Volume +
5. Jack port
6. Indicator light
7. USB-C charging port

RECHARGING YOUR HEADSET

Use the USB-C cable supplied to recharge your headset. Connect the cable to the headset (7), then connect the other end to a USB port: computer, USB charger, etc. The indicator light (6) will come on red during charging. Once the charging has finished, the red light will go off. While the headset is charging, you cannot use it in Bluetooth® mode. It needs to be connected with a wire (cable).

SWITCHING YOUR HEADSET ON AND OFF

To turn on your headset, press the ON/OFF button (1) for 3 seconds: you will hear the beep confirming that the headset has come on. Press the same button again for 3 seconds to switch off your headset: you will hear the beep confirming it has switched off.

MODES

WIRED MODE:
When you connect a jack audio cable to the headset (5), it will switch off automatically and go to wired mode. In this case, the headset’s battery will not be used.

BLUETOOTH® MODE:

1. Before pairing the headset with a Bluetooth® device, make sure that the headset has been disconnected from any other Bluetooth® devices by switching it off with the ON/OfF button (1)
2. Switch on the headset by making a long press on the ON/OFF (1) button to reactivate the ‘Pairing” mode until the indicator light (6) starts to flash alternately blue and red.
3. Enable the Bluetooth® function of your device, then select the headset “TNB BOUNCE”. You will then hear a beep, and the indicator light (6) will flash blue every 3 seconds: pairing has been successful.

When you switch on the headset, it will automatically connect to the last Bluetooth® device paired.

FUNCTIONS IN BLUETOOTH® MODE

• Play/pause: Press the (2) button once to start or pause an audio track.
• Adjusting the volume: briefly press the “-” (3) button to lower the volume/the “+” (4) to increase it. A beep will sound when you reach the minimum or maximum volume.
• Changing tracks: Press the “-” (3) button for 3 seconds to go back to the previous track/press the “+” (4) button once to go to the next track.
• Picking up/hanging up a call: If you receive a call, the music will stop automatically. Press the Mode (2) button on the headset once to pick up, then do the same again to hang up. When the call is over, your music will resume automatically.
• Rejecting a call: press the Mode (2) button for 3 seconds
• Last number redial: Press the Mode (2) button twice to redial the last incoming or outgoing number. This action also works if you are listening to music.

FEATURES

• Bluetooth®: 5.3
• Maximum range: 10 m
• Frequency range: 20 Hz – 20 kHz
• Magnet size: 40 mm
• Impedance: 329
• Headset sensitivity: 102 dB + 3 dB
• Signal/noise ratio: 90 dB
• Integrated battery: Lithium-ion polymer 3.7 V 500 mAh
• Charging: USB-C/USB-A cable included
• Autonomy: 50 hours at 50% of the maximum volume in Bluetooth® mode

NEED HELP

Concerned about the satisfaction of our customers, you can contact us at info@t-nb.com. For maintenance, troubleshooting, and miscellaneous information about this product, please visit our website: www.t-nb.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>