TnB UMLEDBAG LED Traffic Vest Instructions
- June 4, 2024
- TnB
Table of Contents
TnB UMLEDBAG LED Traffic Vest
OUR THANKS
Congratulations on your purchase and thank you for the trust you have placed
in T’nB. Our products comply with the regulations and standards in force.
Before using this device, we advise you to carefully read the instructions and
safety guidelines, and to keep this manual for future reference.
IMPORTANT SAFETY INSTRUCTIONS
- The power supply of your device must match the originally intended specifications.
- Do not immerse the device in water. It resists only splashes of water.
- Do not place flammable objects, explosive substances or dangerous objects near your appliance.
- Use and keep your device in an environment where the temperature is between 0 ° C to 50 ° C.
- Keep away from children.
- Do not use your device if it has been damaged.
- To avoid the risk of electric shock, unplug your device from the main power supply and all devices before cleaning or when not in use.
- No guarantee can be applied in case of misuse
- The manufacturer declines all responsibility for material damage or damage (physical or moral) due to misuse and / or noncompliance with safety instructions.
CONTENT DESCRIPTION
CHARGING & INSTALLATION
- Recharge the LED traffic vest [A] before first use. To do this, use the USB cable located in the inside pocket on the back of the vest.
- A green LED indicator comes on at the centre of the product to indicate that the LED traffic vest is charging.
- When charging is complete, the green indicator light goes off.
USE
- By default, the vest is connected to the remote control. Press the red on/off button (2) once on the back of the vest to activate it.
- Disconnection is possible if the batteries in the remote control and/or the battery of the vest are discharged. First, change the batteries in the remote control and/or recharge the battery of the LED vest. To establish the connection again, press the red on/off button (2) once, then simultaneously press the “Left” (3) and “Right” (4) directional buttons for 20 seconds. Repeat the operation when changing the batteries.
- Press a button on the remote control to display the corresponding light signal on the LED panel of the vest (1). Press the same button again or press the on/off button on the remote control (6) to turn off the light signal.
- If the device remains on without any further action on your part for 5 minutes, it will switch to standby mode.
- If you do not press any button for 2 hours, the vest will turn off automatically. If you wish to then use the device, you will have to turn it back on using the red on/off button (2) on the back of the vest.
MAINTENANCE AND STORAGE
- Before cleaning, make sure that the device is turned off.
- Do not use solvents, abrasive detergents or products that could damage the device.
- Wash by hand only.
CHARACTERISTICS
FURTHER HELP?
Customer satifaction is one of our major concerns. You can contact us on
info@t-nb.com. For maintenance, troubleshooting and
more information on the product, please visit our website
www.t-nb.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>