TnB PKSTREAMER USB Microphone Pack Instructions
- June 6, 2024
- TnB
Table of Contents
PACK MICROPHONE USB
USB microphone pack
Congratulations on your purchase and thank you for your trust and confidence in T’nB. Our products comply with the regulations and standards in force. Before using this product, we recommend that you read the instructions and safety guidelines carefully and store this manual.
IMPORTANT SAFETY GUIDELINES
- The power supply of your device must match the initially designed original specifications.
- Never use your device in rain, in damp places, or near a water supply facility.
- Do not place flammable objects, explosive substances, or dangerous objects near your device.
- Use only the accessories and connectors provided. The use of any other type of accessory not designed for this purpose may irreversibly damage your device. • Use and store your device in an environment where the temperature is between 0 °C and 35°C.
- Keep your device out of the reach of children.
- Do not disassemble your device or try to repair it yourself.
- Do not use your device if it has been subjected to shock or is damaged.
- To avoid the risk of electric shock, unplug your device from the main supply and from any device before cleaning it or if you are not using it. • In the case of a wireless product, do not leave the product near credit cards or other storage media.
BOX CONTENTS
lx High-quality microphone
lx Microphone cap
lx Articulated arm
lx Microphone shock mount
lx Table mount
lx Anti-pop filter lx USB cable
SPECIFICATIONS
Transducer | Capacitor – 16mm diameter |
---|---|
Directionality | Cardioid |
Frequency response | 30Hz – 16kHz |
Sensitivity | -38dB +/- 3dB (OdB=1 V/Pa a 1 kHz) |
Equivalent noise level | 16dBA Max |
SPL Max | 120dB |
Signal / Noise ratio | 70 dB |
Sampling frequency | 192kHz/24bit |
USB Cable | 2.5m USB-A / USB-B |
Compatibility | Integrated sound card, Plug and Play PC/MAC |
ADVICE ON USING THE MICROPHONE
-The side with the logo indicates the cardioid area of the microphone.
– Use the pop filter to avoid breathing noises and protect the condenser from
moisture.
– Place the pop filter about 15 cm from the microphone
INSTALLATION
A- Install the microphone as per the steps below:
1- Screw the fixing onto a stable surface (see fixing diagram)
2- Insert the articulated arm into the hole provided for this purpose
3- Tighten the screw to lock the articulated arm
4- Screw the microphone holder onto the end of the arm
5- Screw the pop filter onto the arm
6- Cover the microphone with the cap
7- Press the clamp on the damper support and insert the microphone
B- Install the microphone on the PC
– Once the microphone is connected, a notification appears on your PC
indicating that «your device is ready for useD.
WINDOWS 10
1- Right-click on the sound icon at the bottom right of the Windows bar.
2- Select «Recording Devices».
3- Right-click on the microphone and select «Set as Default Device».
Changing the volume
1 – Right-click on the Sound icon at the bottom right of the Windows bar.
2 – Select «Recording devices».
3 – Double click on the microphone.
4 – Go to the «Levels» tab and modify the volume.
IOS Installation
– Click on the apple and go to System preference -> Sound -> Input, then
select «USB Condenser Microphone».
NEED HELP?
Concerned about the satisfaction of our customers, you can contact us at
info@t-nb.com. Maintenance, troubleshooting,
miscellaneous information about this product, please visit our website:
www.t-nb.com