TnB PKVLOGGER Vlogger Accessory Kit with Tripod, Microphone and LED Flash Instructions
- June 6, 2024
- TnB
Table of Contents
PKVLOGGER Vlogger Accessory Kit with Tripod, Microphone and LED Flash
Instruction
MICROPHONE
Type of mic|
Unidirectional
Frequency range| 100-16000Hz
Sensitivity| -20dB42dB
signal to noise ratio| 58dB
Cord length| 40cm
Battery/ Batterie:| 1x CR2032
PROJECTEUR LED
Number of LED:| 50
Power/ puissance:| 3,5W (max)
Light flux:| 350lm.
Input DC:| USB 5V 1A
Battery/ Batterie:|
Internal Li-ion polymer 3,7V, 500mAH/ Batterie interne L-ion polymere, 3,7V, 500mAh
REMOTE CONTROL
Bluetooth® version:| 42
Max power:| 4.0. dBm
Frequency range:|
2,402 – 2,480 GHz
Battery/ Batterie:| 1x CR2025
Congratulations on your purchase and thank you for the trust you have placed
in
T’nB. Our products comply with the all relevant regulations and standards.
Before
using this equipment, we recommend that you read the instructions and safety
instructions carefully and keep this manual for future reference.
IMPORTANT SAFETY GUIDELINES
- The power supply of your device must match the initially designed original specifications.
- Never use your device in rain, in damp places or near a water supply facility.
- Do not place flammable objects, explosive substances or dangerous objects near your device.
- Use only the accessories and connectors provided. The use of any other type of accessory not designed for this purpose may irreversibly damage your device.
- Use and store your device in an environment where the temperature is between 0 °C and 35
- Keep your device out of the reach of children
- Do not disassemble your device or try to repair it yourself.
- Do not use your device if it has been subjected to shock or is damaged.
- To avoid the risk of electric shock, unplug your device from the main power and from any device before cleaning it or if you are not using it.
- In the case of a wireless product, do not leave the product near credit cards or other storage media.
NEED HELP?
Concerned about the satisfaction of our customers, you can contact us at
info@t-nb.com. Maintenance, troubleshooting, miscellaneous information about
this product,
please visit our website: www.t-nb.com
-
To pair the remote control, press and hold the button for 3 seconds. When the LED
flashes, connect the Bluetooth on your smartphone and select “REMOTE CONTROL’
Once the tripod is set up, simply press the button on the remote control to start video
recording or taking pictures. -
Recharge the projector using the micro-USB cable supplied the unit. To turn it on, press
hold the button on the unit for 3 seconds. -
To activate the microphone, plug the jack cable into your smartphone input, then press
the button on the left.
