TnB UMHELMLED2 LED Protection Helmet Instructions

: June 4, 2024
: TnB

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LED Protection Helmet
Instructions Manual UMHELMLED2

OUR THANKS
Congratulations on your purchase and thank you for the trust you have placed in T’nB. Our products comply with all relevant regulations and standards. Before using this equipment, we recommend that you read the instructions and safety instructions carefully and keep this manual for future reference.

IMPORTANT SAFETY INSTRUCTIONS

The guarantee will be invalidated in the event of misuse.
T’nB accepts no liability if these safety instructions are not respected.
Handle the product with care.
The power supply for your device must be suitable for the intended purpose
The sockets for the electrical equipment must be near the said items of equipment and easily accessible.
Keep the device away from flammable objects, explosive substances, or dangerous objects.
Only use, and store your device in an environment with a temperature between 0°C and 40°C.
Keep your device out of the reach of children.
This device is not designed to be used by people (including children) whose physical, sensorial, or mental abilities are reduced, or by people without the necessary experience or knowledge unless they can be supervised or given prior instruction on how to use the device a person responsible for their safety.
Do not take your device apart and do not attempt to repair or modify it yourself.
Stop using your device if it is knocked or damaged.
To avoid the risk of electric shock, disconnect your device from the mains and from any other device before cleaning or when not in use.
Only use the accessories and connectors supplied. Using any other type of accessory not intended for this charger could irreparably damage your device.
Make sure the device is switched off and cold before cleaning. Do not use any lubricant or other product which may damage the device.
T’nB accepts no liability for damage caused by misuse of the product or use with an incompatible electrical device.
Only use this helmet for cycling, rollerblading, riding a scooter, hoverboarding, or skateboarding. It is not designed for other sports that require other specific features. It is absolutely not recommended for motorcycling or other motorized vehicles. After an impact, whether the helmet was in use or not, it must be disposed of even if the damage is not visible. A helmet reduces the severity of head injuries but does not prevent the risk of serious or even fatal injuries. It does not guarantee protection against all types of impact. If a helmet is damaged after impact, it has fulfilled its role.
We advise you to replace your helmet within 5 years of the date of manufacture (marked on the label on the helmet).
For maintenance, clean the helmet with water only; do not use detergent.
Only use T’nB spare parts, decorations, or accessories that are suitable for this type of helmet.
Do not use paint, detergent, or other chemical products on the helmet.
Do not expose your helmet to temperatures above 50°C (for example, by leaving it in a car in the sun)
Never tamper with the original parts of your helmet.
Take care to clean the visor only with a soft damp cloth. Never use corrosive substances, detergents, solvents, etc.
Never look directly at the sun, even when wearing the visor.
It is not suitable for providing protection against artificial light sources, such as a solarium
UMHELMLED2VISOR visor, category 0: Very limited reduction from solar glare
Never leave unsupervised while charging. In the event of a short-circuit or mechanical damage to the internal lithium battery, there is a risk of overheating or fire.
CAUTION: risk of explosion if the battery is replaced with an unsuitable model. Used batteries should be recycled in accordance with current regulations.
Please charge fully before using it for the first time
Never look directly at the LED light beam. Do not point it directly into the eyes of a person or animal. An optical beam that is potentially dangerous is emitted by this product.

Read this manual carefully before each use and keep it until the end of the product’s life.
How do I adjust the helmet?
Check the size shown inside the helmet. For maximum protection, the helmet must be adjusted to the user’s head size and buckled properly as described in the instructions in this manual
Adjusting the helmet’s head circumference:
Open the adjustment mechanism at the back, put the helmet on your head, and then close the mechanism while adjusting it. To check that the helmet is correctly adjusted, shake your head slightly. The helmet should not move.
Strap crossing buckles:
Adjust the crossing buckles so that the straps form a “Y” under the earlobe without covering it.
Fastening:
The strap must go under the jaw against the throat. The buckle must not rest on the jaw. Adjust the tightness of the strap: it should be neither too tight nor too loose.
The tightness is correct if you can tilt the helmet backward without uncovering your forehead, and forwards without obstructing your field of vision. Caution: you shouldn’t be able to take the helmet off when the fastening system is buckled. The helmet has a retaining mechanism designed to prevent it from coming off in the event of an accident.
How do I charge the LEDs of the helmet?
Connect the USB / USB-C cable to the USB-C port at the back of the helmet and to a mains charger.
LED functions
Press once to turn on the front and rear LEDs.
Press a second and third time to change the mode of the rear LED.
Press a fourth time to turn off the LEDs.
FURTHER HELP?
Customer satisfaction is one of our major concerns. You can contact us at info@t-nb.com.
For maintenance, troubleshooting, and more information on the product, please visit our website www.t-nb.com

| **** Direct current
To indicate on the rating plate that the equipment is suitable for direct current only; to identify relevant terminals.
---|---

t-nb.com
T’nB SA France / Rue Nicolas Joseph Cugnot
13300 Salon-de-Provence
Protocole CRITT SPORT LOISIRS VPCS002/ 2022
EN1078 + Al 02/2013
Conforme au reglement UE 2016/425
Made in China
NOTICE_UMHELMLED2.indd 20