TnB B0843R6WJ9 10 Inch LED Ring Pack Instructions
- June 6, 2024
- TnB
Table of Contents
TnB B0843R6WJ9 10 Inch LED Ring Pack
Congratulations on your purchase and thank you for the trust you have placed in T’nB. Our products comply with the all relevant regulations and standards. Before using this equipment, we recommend that you read the instructions and safety instructions carefully and keep this manual for future reference.
IMPORTANT SAFETY INSTRUCTIONS
- The power supply of your device must correspond to the original characteristics initially planned.
- Never use your device underwater, in damp places or near water without the waterproof case.
- Do not place flammable materials, dangerous objects or explosive substances near your device.
- Use only the accessories and connectors provided. The use of any other type of accessory not intended for this purpose could cause irreparable damage to your device.
- Use and store your device only in an environment where the temperature is between 0°C and 45°C.
- Keep your device out of the reach of children.
- Do not dismantle or attempt to repair the unit yourself.
- Do not use your device if it has been dropped or damaged.
- To avoid the risk of electric shock, disconnect your unit from the main power supply and any appliances before cleaning or when not in use.
- In the case of a wireless product, please do not leave the product near credit cards or other data storage media
- Keep your product away from a WIFI router or other Bluetooth device during use to avoid interference.
NEED HELP?
Concerned about the satisfaction of our customers, you an contact us at
info@t-nb.com. Maintenance, troubleshooting, miscellaneous
information about this product, please visit our website:
www.t-nb.com
Direct current
To indicate on the rating plate that the equipment is suitable for direct current only; to identify relevant terminals.
INSTALLATION
The ring must be supplied with power using the attached USB cable. The ring can be used with diWerent accessories:
- A threaded flexible holder to be used with a smartphone
- A 1/4”threadadapter, compatible with cameras
USE
- Press the ON/OFF button (4) to switch to settings.
- Press the + (1) / – (3) buttons to increase/decrease brightness.
- Press the Switch (2) button to navigate between the 3 brightness modes.
PAIRING
Turn on the Bluetooth remore control on the right. Activate the smartphone’s
Bluetooth and connect to the “INFLUENCE REMOTE” Bluetooth remote. Now you can
take photos or launch videos from your smart- phone thanks to the remote
control. Press the“IOS”button if your smartphone is an iPhone, press
the“ANDROID”button if your smartphone has an Android operating system.
To avoid any risk associated with opening the battery compartment of the
remote control, please position the silicone shell on it. The product should
be kept out of the reach of children
FEATURES
- Ring size: 10“ Diameter: 25.5cm LED no.: 128
- Color rendering index: 85Ra
- Colour temperature: 3000K – 6000K Light intensity: 500Lx
- Power output: 12W
- Power supply : USB SV — 2A