smappee EV Ultra 240D Fast Charger User Guide
- August 15, 2024
- smappee
Table of Contents
smappee EV Ultra 240D Fast Charger
Product Specifications
- Product Name: Smappee EV Ultra 240D
- Relative Humidity: 0% – 95%, non-condensing
- Operating Altitude: 0 – 2,000 m
- Standards: IEC 61851-21, ISO 15118, DIN SPEC 70121
- Product Certification: CE, optional Eichrecht-compliant
- Communication Protocol: OCPP 1.6 J, ready for an update to OCPP 2.0.1
- Mounting Method: Floor, with supplied anchor
Product Usage Instructions
Installation
To install the Smappee EV Ultra 240D, follow these steps:
- Choose a suitable location on the floor for mounting.
- Use the supplied anchor to secure the unit in place.
- Ensure proper connection to a power source and vehicle.
Configuration
Configure the Smappee EV Ultra 240D by:
- Setting up the communication protocol based on your requirements.
- Adjusting any settings related to charging preferences or notifications.
- Ensure firmware is up-to-date for optimal performance.
Operation
To use the Smappee EV Ultra 240D:
- Connect your electric vehicle to the charging station.
- Monitor the charging status through the provided interface.
- Follow any additional instructions based on the vehicle’s firmware changes.
FAQ
- Q: What is the subscription plan mentioned in the manual?
- A: The Business Plan is a subscription plan priced per connector and per month, with additional add-ons available based on your needs.
Introduction
The Smappee EV Ultra is a floor-mounted fast charger with two CCS2 connectors.
The charging status and instructions are displayed on the integrated screens.
This charger features a robust, compact, all-weather enclosure made from high-
quality and recyclable materials. It also includes LED lighting for enhanced
visibility and security.
Unlock Smappee’s energy intelligence and charging management features with our
Business Plan*:
- Maximize renewable energy consumption and improve overall energy efficiency.
- Reduce costs and minimize grid investment with dynamic load management.
- Monitor multiple chargers remotely and set up priority charging.
- Make chargers public with our CPO add-on, manage rates, and integrate Smappee Pay Station.
- Get over-the-air updates to always have the latest features and improvements and to cope with the cars’ firmware changes.
The Business Plan is a subscription plan priced per connector and month. Additional add-ons are available based on your needs.
Specifications
- Dimensions
- Charging station: 1870 × 920 × 325 mm
- Cables: 2 x 3.25 m
- Weight
- Charging station: 340 kg
- Anchor: 22.5 kg
- Operating temperature: -25 °C to 50 °C (derating from 40 °C)
- Storage temperature: -25 °C to 70 °C
- Relative humidity: 0 % – 95 %, non-condensing
- Operating altitude: 0 – 2.000 m
- Standards
- IEC 61851-21, ISO 15118,
- DIN SPEC 70121
- Product certification: CE, optional Eichrecht-compliant
- Connectivity
- Ethernet 100BASE-T (with fallback to 4G in case of connection loss)
- 4G Modem
- Communication protocol: OCPP 1.6 J, ready for update to OCPP 2.0.1
- Interfaces
- Information status: 2 x 6.5” RGB Display
- Session activation: QR code / RFID (Optional Smappee Pay Station)
- Mounting method: Floor, with supplied anchor
- Enclosure
- Material: powder-coated steel
- Standard colour: RAL7021 (black grey) optional customization
- Rating: IP 54 / IK 10
- Acoustic noise: 0 dB – 60 dB
- Indoor/outdoor use
- Nominal input
- Main power supply: 3P + PE
- Auxiliary power supply: 5G2.5 mm²
- Rated voltage (Un): 400 Vac ± 10 %
- Rated frequency (fn): 50 Hz
- Nominal input current: 350 A
- Power factor: > 98 % at full capacity
- Efficiency: 95.5% at full capacity
- DC Output
- Nominal power charging point:
- Maximum 120 kW
- Nominal power charging station:
- Maximum 240 kW
- Charge mode: Mode 4 (IEC 61851)
- DC Plug: CCS2
© 2024 Smappee. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>