CVS CDF-100-AF-Q, Commercial Control Dampers User Manual
- June 12, 2024
- CVS
Table of Contents
DAMPER SERIES
Model CDF-100 Series
Commercial Control Dampers
Airfoil Blade
Manual Quadrant/Motorised
Reference:|
---|---
Project:|
Location:|
Date:|
Client:|
Consultant:|
Contractor:|
Submitted by:|
Application:
The CVS commercial control damper models CDF-100-AF-Q and CDF-100-AF-M are
intended for low to high pressure and velocity applications and can be
provided in opposed or parallel blade orientations.
The model CDF-100-AF-Q (manual quadrant) is a general purpose commercial
control damper for use in manual balancing control applications where tight
sealing is not of primary importance.
The model CDF-100-AF-M (motorised) is a general purpose commercial control
damper for use in automatic balancing control or shut off applications where
tight sealing is a primary requirement.
Standard Construction:
| Standard| Optional
---|---|---
__
Frame Material
| 2.3mm thick extruded aluminium 6063-T6 flanged frame| Multiple gauges galvanized steel or stainless steel flange frame and other flange sizes
(only for roll formed frames)
Frame Depth| 100mm| Other depths available (only for roll formed frames)
__
Blade Material and Type
| __
1.4 mm thick extruded aluminum 6063-T6
airfoil shaped (Type 1)
| __
16 gauge galvanized steel or stainless steel roll formed airfoil shape double skin profile (Type 2)
__
Blade Seal
| __
Q – None
M – Foam Type
| Q – Foam Type, Neoprene,
EPDM, Silicon Rubber
M – Neoprene, EPDM, Silicon Rubber
Blade Operator| Q – Manual Quadrant M – Electric Actuator (On/Off Type)|
M – Electric Actuator (Modulating type)
Dimensions| Actual| —–
Axle Material| Zinc plated steel| Stainless steel
__
Axle Bearings
| __
Nylon
| Brass, Bronze, Stainless steel, Acetal Copolymer, Polycarbonate
Type of Blade Operation| __
Parallel
| Opposed
J amb Seal| Q – None M – SS301| Q – SS301
Minimum & Maximum Sizes:
Model| Minimum Single Section| Maximum Single Section|
Maximum Multi Section
---|---|---|---
CDF-100-AF- Q
(Manual quadrant)
| __
5” x 6”
(127 x 152)
| __
36″ x 48”
(914 x 1219)
| __
Unlimited Size
(Please consult factory)
CDF-100-AF-M
(Motorised)
All dimensions shown in inches, parentheses () indicate millimeters.
Optional Construction:
Operators:
Manual Q uadrant Actuators
: 24V 230V
Spring Return Non-Spring Return
On/Off Modulating
Airfoil Blade Construction:
Type 2
As part of our continuous improvement program, we reserve the right to make
further improvements without notice.
Application:
The CVS commercial control damper models CDF-100-3V-Q and CDF-100-3V-M are
intended for low to high pressure and velocity applications and can be
provided in opposed or parallel blade orientations. The model CDF-100-3V-Q
(manual quadrant) is a general purpose commercial control damper for use in
manual balancing control applications where tight sealing is not of primary
importance. The model CDF-100-3V-M (motorised) is a general purpose commercial
control damper for use in automatic balancing control or shut off applications
where tight sealing is a primary requirement.
Standard Construction:
| Standard| Optional
---|---|---
__
Frame Material
| 2.3mm thick extruded aluminium 6063-T6 flanged frame| Multiple gauges galvanized steel or stainless steel flange frame and other flange sizes
(only for roll formed frames)
Frame Depth| 100mm| Other depths available (only for roll formed frames)
Blade Material and Type| 16 gauge galvanized steel roll formed 3V
shape profile| Multiple gauges of galvanized steel & stainless steel roll
formed 3V shape profile
__
Blade Seal
| Q – None
M – Foam Type
| Q – Foam Type, Neoprene,
EPDM, Silicon Rubber
M – Neoprene, EPDM, Silicon Rubber
Blade Operator| Q – Manual Quadrant M – Electric Actuator (On/Off Type)|
M – Electric Actuator (Modulating type)
Dimensions| Actual| —–
Axle Material| Zinc plated steel| Stainless steel
Axle Bearings| Nylon| Brass, Bronze, Stainless steel
Type of Blade Operation| __
Parallel
| Opposed
J amb Seal| Q – None M – SS301| Q – SS301
Minimum & Maximum Sizes:
Model| Minimum Single Section| Maximum Single Section|
Maximum Multi Section
---|---|---|---
CDF-100-3V- Q
(Manual quadrant)
| __
4” x 4”
(101 x 101)
| __
36″ x 48”
(914 x 1219)
| __
Unlimited Size
(Please consult factory)
CDF-100-3V-M
(Motorised)
All dimensions shown in inches, parentheses () indicate millimeters.
Optional Construction:
Operators:
Actuators
: 24V 230V
Spring Return Non-Spring Return
On/Off Modulating
Manual Q
uadrant
Application:
Manual Quadrant/Motorised The CVS commercial control damper models
CDF-165-AF-Q and CDF-165-AF-M are intended for low to high pressure and
velocity applica- tions and can be provided in opposed or parallel blade
orientations. The model CDF-165-AF-Q (manual quadrant) is a general purpose
commercial control damper for use in manual balancing control applica- tions
where tight sealing is not of primary importance. The model CDF-165-AF-M
(motorised) is a general purpose commercial control damper for use in
automatic balancing control or shut off applications where tight sealing is a
primary requirement.
Standard Construction:
| Standard| Optional
---|---|---
__
Frame Material
| 20 gauge thick roll formed galvanized steel flanged frame| Multiple gauges
galvanized steel or stainless steel flange frame and other flange sizes (only
for roll formed frames)
Frame Depth| 165mm| Other depths available (only for roll formed frames)
__
Blade Material and Type
| 16 gauge galvanized steel roll formed airfoil shape double skin profile (Type 2)| 1.4 mm thick extruded aluminum 6063-T6
airfoil shape (Type 1)
__
Blade Seal
| Q – None
M – Foam Type
| Q – Foam Type, Neoprene,
EPDM, Silicon Rubber
M – Neoprene, EPDM, Silicon Rubber
Blade Operator| Q – Manual Quadrant M – Electric Actuator (On/Off Type)|
M – Electric Actuator (Modulating type)
Dimensions| Actual| —–
Axle Material| Zinc plated steel| Stainless steel
__
Axle Bearings
| __
Nylon
| Brass, Bronze, Stainless steel, Acetal Copolymer, Polycarbonate
Type of Blade Operation| __
Parallel
| Opposed
J amb Seal| Q – None M – SS301| Q – SS301
Minimum & Maximum Sizes:
Model| Minimum Single Section| Maximum Single Section|
Maximum Multi Section
---|---|---|---
CDF-165-AF- Q
(Manual quadrant)
| __
5” x 6”
(127 x 152)
| __
36″ x 48”
(914 x 1219)
| __
Unlimited Size
(Please consult factory)
CDF-165-AF-M
(Motorised)
All dimensions shown in inches, parentheses () indicate millimeters.
Optional Construction:
Operators:
Manual Q
uadrant
Actuators:
24V 230V
Spring Return Non-Spring Return
On/Off Modulating
Airfoil Blade Construction: Type 1
Application:
The CVS commercial control damper models CDF-165-3V-Q and CDF-165-3V-M are
intended for low to high pressure and velocity applications and can be
provided in opposed or parallel blade orientations.
The model CDF-165-3V-Q (manual quadrant) is a general purpose commercial
control damper for use in manual balancing control applications where tight
sealing is not of primary importance.
The model CDF-165-3V-M (motorised) is a general purpose commercial control
damper for use in automatic balancing control or shut off applications where
tight sealing is a primary requirement.
Standard Construction:
| Standard| Optional
---|---|---
__
Frame Material
| 20 gauge thick roll formed galvanized steel flanged frame| Multiple gauges galvanized steel or stainless steel flange frame and other flange sizes
(only for roll formed frames)
Frame Depth| 165mm| Other depths available (only for roll formed frames)
Blade Material and Type| 16 gauge galvanized steel roll formed 3V
shape profile| Multiple gauges of galvanized steel & stainless steel roll
formed 3V shape profile
__
Blade Seal
| Q – None
M – Foam Type
| Q – Foam Type, Neoprene,
EPDM, Silicon Rubber
M – Neoprene, EPDM, Silicon Rubber
Blade Operator| Q – Manual Quadrant M – Electric Actuator (On/Off Type)|
M – Electric Actuator (Modulating type)
Dimensions| Actual|
Axle Material| Zinc plated steel| Stainless steel
Axle Bearings| Nylon| Brass, Bronze, Stainless steel
Type of Blade Operation| __
Parallel
| Opposed
J amb Seal| Q – None M – SS301| Q – SS301
Minimum & Maximum Sizes:
Model| Minimum Single Section| Maximum Single Section|
Maximum Multi Section
---|---|---|---
CDF-165-3V- Q
(Manual quadrant)
| __ 4” x 4”
(101 x 101)
| __ 36″ x 48”
(914 x 1219)
| __ Unlimited Size
(Please consult factory)
CDF-165-3V-M
(Motorised)
All dimensions shown in inches, parentheses () indicate millimeters.
Optional Construction:
Operators:
Actuators : 24V 230V Spriff Modulatingng Return Non-Spring Return
On/O
Manual Quadrant
PRESSURE DROP – INTAKE AND EXHAUST:
Air Performance testing has been performed in accordance with Test Method as per latest version of ANSI/AMCA Standard 500-D, Figure 5.3 (Duct Upstream and Downstream).
PRESSURE DROP – INTAKE AND EXHAUST:
Air Performance testing has been performed in accordance with Test Method as
per latest version of ANSI/AMCA Standard 500-D, Figure 5.3 (Duct Upstream and
Downstream).
AIR LEAKAGE
Tested for air leakage at standard air density in accordance with latest version of ANSI/AMCA Standard 500-D, Figure 5.4. Data are based on a torque of 44in-lbs./ft2 applied to close and seal the damper during the test. Air leakage is based on operation between 0°C-49°C (32°F-120°F).
Maximum Alowable Leakage, cfm/ft 2
Class| 1 in. w.g.| 2 in. w.g.| 3 in. w.g.| 4 in.
w.g.| 6 in. w.g.
1A| 3| N/A| N/A| N/A| N/A
1| 4| 6| 7| 8| 10
2| 10| 14| 17| 20| 25
AMCA Leakage Class
Damper Size| 1 in. w.g.| 2 in. w.g.| 3 in. w.g.| 4 in.
w.g.| 6 in. w.g.
12 inch. x 48 inch. (305 mm x 1219 mm)| Class 1A| Class 1| Class 1| Class 1|
Class 1
36 inch. x 36 inch. (914 mm x 914 mm)| Class 1A| Class 1| Class 1| Class 1|
Class 1
48 inch. x 36 inch. (1219 mm x 914 mm)| Class 1A| Class 1| Class 1| Class 1|
Class 1
SUGGESTED SPECIFICATION:
Central Ventilation Systems certifies that the Flange Type VCD Models CDF
Series as shown herein are licensed to bear the AMCA Seal. The ratings shown
are based on tests and procedures performed in accordance with AMCA
Publication 511 and comply with the requirements of the AMCA Certified Ratings
Programs. The AMCA Certified Ratings Seal applies to air performance and air
leakage ratings only.
Product Range
- Fire-Resisting Ductwork (BS & EN)
- Fire-rated Insulation (ASTM & UL)
- Sound Attenuators (ASTM & BS)
- VAV Boxes (AHRI)
- Life Safety Dampers (UL)
- Control Dampers (AMCA & BS)
- Access Doors (BS & EN)
- Louvers (AMCA)
- Smoke Exhaust, Building, Car Park & Tunnel Ventilation Fans (AMCA & EN)
- Domestic and Industrial Ventilation Fans
- AHU, FAHU, FCU, RTU, ERV & Ecology Units (Eurovent, TUV & AHRI)
- Electrostatic Precipitators (ESPs) & UL Listed Air Filters (UL)
Our Brands
Central Ventilation Systems
K.S.A | U.A.E | Qatar | Kuwait | Oman | Egypt | Canada
E: sales@cvshvac.com | W:
www.cvshvac.com