DEWALT DXV34P-QT Industrial Vacuum Cleaner Instruction Manual

DEWALT DXV34P-QT Industrial Vacuum Cleaner

Product Information

• Model: DXV34P-QT – Copyright
• Tank volume: 34 L – Hose: 48mm x 2.1m
• Package Contents: narrow nozzle, wide nozzle, plug, Clean ConnectTM filter, user manual, floor nozzle, wheels

Product Usage Instructions

• Mount the rubber wheels according to the instructions in this user manual.
• Attach the suction head to the container.
• To reduce exposure to chemicals, avoid using the product with materials such as asbestos or pesticides.
• Make sure the assembly is tight.
• Follow the important safety instructions provided in the manual.
• When not in use, unplug the device and store it safely.
• Regularly clean and replace the filters if damaged.
• Do not use the power cord as a handle or immerse it in water.
• Be cautious when using the  product with flammable substances like oil or paint thinner.
• Dispose of the waste properly and do not mix it with household waste.
• The product and batteries contain materials that can be recycled or reused, reducing environmental impact.
• Mount the suction head securely before using the device. 13. Before maintenance, turn off the device and remove the suction head.
• When transporting or shutting down the device, make sure to disconnect it from the power source.
• Store this user manual for future reference.
• Before reattaching the suction head, make sure it is clean and free from any obstructions.
• Follow the maintenance instructions provided in the manual for optimal performance.
• If the suction capacity decreases, replace the paper or fabric bag.
• Read and understand the operating instructions carefully before using the device.
• Pay attention to the safety guidelines and symbols provided in the manual to prevent fire, electric shock, and injury. Please note that this is a partial extract from the user manual, and additional instructions and safety precautions may be provided. It is essential to refer to the complete user manual for comprehensive product information and usage guidelines.

PRODUCT SPECIFICATIONS

Package Contents

The package contains

• 1 48mm x 2.1m Hose
• 2 Extension Wands
• 1 Crevice Nozzle
• 1 Utility Nozzle
• 1 Accessory Bag
• 1 Disposable Dust Bag
• 1 Clean Connect Filter
• 1 Instruction manual
• 1 Floor Brush
• 1 Round Brush
• 1 Screw Package
• 4 Casters
• Check for damage to the tool, parts or accessories which may have occurred during transport.
• Take the time to thoroughly read and understand this manual prior to operation.

DEFINITIONS: SAFETY GUIDELINES

The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.

•   DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
• WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
• CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
• NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.

IMPORTANT SAFETY INSTRUCTIONS

• WARNING: When using electrical appliances, always follow basic safety precautions to reduce the risk of fire, electric shock and personal injury, including the following:

BEFORE USING THE APPLIANCE, READ AND FOLLOW ALL INSTRUCTIONS.

• WARNING: To reduce the risk of electric shock. Do not expose to rain. Store indoors.
• Do not leave the appliance when it is connected to a power source. Unplug it from outlet when not in use and before servicing.
• Do not allow the appliance to be used as a toy. Pay close attention when the appliance is used by or near children.
• Use the appliance ONLY as described in the manual. Use only DEWALT recommended attachments.
• Do not use the appliance with a damaged cord or plug. If the appliance is not working correctly, or if it has been dropped,damaged, left outdoors, or dropped in water, return it to a service center.
• Do not pull or carry the appliance by the cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Do not run the appliance over the cord. Keep cord away from heated surfaces.
• Do not unplug the appliance by pulling on the cord. To unplug,grasp the plug, not the cord.
• Do not handle the plug or appliance with wet hands.
• Do not put any objects into the openings of the appliance. Do not use the appliance with any opening blocked; keep free of dust, lint, hair and anything else that may reduce air flow.
• Keep hair, loose clothing, fingers, and all body parts away from the openings and moving parts.
• Turn off all controls before unplugging appliance.
• Take extra care when cleaning on stairs.
• Do not use the appliance to pick up flammable or combustible liquids, such as gasoline, or use in areas where flammable or combustible liquids are present.
• Static shocks are possible in dry areas or when the relative humidity of the air is low. This is only temporary and does not affect the use of the vacuum. To reduce the frequency of static shocks, add moisture to the air with a console, installed humidifier or use anti-static hose (standard on some models).
• To avoid spontaneous combustion, empty canister after each use.
  CAUTION: The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience andknowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  Children should be supervisde to ensure that they do not play with the appliance.

SAVE THESE INSTRUCTIONS
ADDITIONAL SAFETY RULES

• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use to vacuum combustible explosive materials, such as coal, grain, or other finely divided combustible material.
• Do not use to vacuum hazardous, toxic or carcinogenic materials, such as asbestos or pesticide.
• Never pick up explosive liquids (e.g. gasoline, diesel fuel, heating oil, paint thinner, etc.), acids or solvents.
• Do not use vacuum without filters in place, except as described under Wet Pickup Applications.
• Some wood contains preservatives which can be toxic. Take extra care to prevent inhalation and skin contact when working with these materials. Request and follow any safety information available from your material supplier.
• Do not use vacuum as a step ladder.
• Do not place heavy objects on vacuum.
• An extension cord must have adequate wire size for safety,
• If an extension cord is to be used outdoors it must be marked

WARNING:
To reduce your exposure to these chemicals, wear approved safety equipment such as dust masks that are specially designed to filter out microscopic particles. For your convenience and safety, the following warning labels are on your vacuum.

ON MOTOR HOUSING :
WARNING:
TO REDUCE THE RISK OF INJURY, USER MUST READ INSTRUCTION MANUAL. DO NOT RUN UNATTENDED. DO NO T PICK UP FLAMMABLE, COMBUSTIBLE OR HOT MATERIALS. DO NOT USE AROUND EXPLOSIVE DUST,LIQUIDS OR VAPORS. ELECTRICAL DEVICES PRODUCE ARCS OR SPARKS WHICH CAN CAUSE FIRE OR EXPLOSION. DO NOT USE AT FILLING STATIONS OR ANYWHERE GASOLINE IS STORED OR DISPENSED. DO NOT VACUUM TOXIC OR CARCINOGENIC MATERIALS OR OTHER HEALTH ENDANGERING MATERIAL SUCH AS ASBESTOS OR PESTICIDES. ALWAYS USE PROPER EYE AND RESPIRATORY PROTECTION. TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE TO RAIN. STORE INDOORS. WHEN SERVICING, USE ONLY IDENTICAL REPLACEMENT PARTS. NOT TO BE USED AS A STEP STOOL.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS
UNPACKING & SET-UP SUMMARY

1. Pull lid latches in an outward motion, remove power head and some accessories that may have been shipped in the tank.
2. Attach heavy-duty rubberized casters following the instructions in this manual.
3. Before replacing power head, refer to this manual to ensure you have the proper filters installed for your cleaning operation.
4. Replace power head, and apply pressure with thumb to each latch until it snaps tightly in place. Make sure all lid latches are clamped securely.
5. Insert the air hose end into inlet of tank.
6. Attach the extension wands to the accessory end of the hose. Apply slight pressure until fitting is tight.
7. Attach one of the cleaning accessories (depending on your cleaning requirements) on the extension wands. Twist slightly to tighten the connection.
8. Plug the cord into the wall outlet. Your cleaniner is ready for use.

WARNING:
To reduce the risk of fire or explosion, do not operate this vac in areas with flammable gases, vapors or explosive dust in the air. Flammable gases or vapors include but are not limited to: lighter fluid, solvent-type cleaners, oil-based paints, gasoline, alcohol or aerosol sprays. Explosive dusts include but are not limited to: coal, magnesium, aluminum, and grain or gun powder. Do not vacuum explosive dust, flammable or combustible liquids or hot ashes. Do not use this vac as a sprayer for any flammable or combustible liquid. To reduce the risk of health hazards from vapors or dusts, do not vacuum toxic materials.

IMPORTANT SAFEGUARDS
The symbol on the product or packaging indicates that the product must not be treated as domestic refuse. Instead, it should be handed in to a collection point for the recycling of electrical and electronic components. By ensuring the product is treated in the correct manner, you will help prevent any negative impact on the environment and health that might arise were the product to be discarded as ordinary refuse. For further information about recycling, you should contact your local authorities, refuse collection service or the sales outlet where you bought the goods.

Protecting the environment
Separate collection. Products and batteries marked with this symbol must not be disposed of with normal household waste. Products and batteries contain materials that can be recovered or recycled reducing the demand for raw materials. Please recycle electrical products and batteries according to local provisions. Further information is available at www.2helpU.com

WARNING: This product is NOT to be used for filtering of pathogens, for example CoVID-19. Follow all local, state and federal guidance on general cleaning practices.

Description (Fig. A)

WARNING : Never modify the power appliance or any part of it. Damage or personal injury could result.

1. Top handle/cord wrap
2. Power cord
3. On/off switch
4. Vacuum head
5. Lid latches
6. Dust tank
7. Hose
8. Casters
9. Clean Connect Filter
10. Vacuum port
11. Hose strap
12. Disposable Dust Bag

ASSEMBLY AND ADJUSTMENTS (Fig. A–C)

WARNING: To reduce the risk of injury, turn appliance off and disconnect appliance from power source before installing and removing accessories, before adjusting or changing
set-ups or when making repairs. An accidental start-up can cause injury.

WARNING: The filters 9 must always be in place while vacuuming, except as described under Wet Pick Up Applications under Operation. When vacuuming fine dust, you may also use an additional paper dust bag to make emptying the canister easier.

1. Install the disposable dust bag as sho12 wn in Figure B.
   NOTE: Be careful not to tear the bag. Place bag securely onto vacuum port to 10 provide a tight seal for maximum dust collection performance.

2. Place the vacuum head 4 onto the dust tank and secure it by closing the lid latches .

3. Insert end of hose 7 into clip-in hose vacuum port and tighten the end of hose on to the tank.

OPERATION

Instructions for Use (Fig. A, D, E)
WARNING: Always observe the safety instructions and applicable regulations.
WARNING: To reduce the risk of injury, turn appliance off and disconnect appliance from power source before installing and removing accessories, before adjusting or changing set-ups or when making repairs. An accidental start-up can cause injury.

1. Plug the power cord into an appropriate outlet.
2. Turn the on/off switch 3 to the ON position ( I ).
3. Your DEWALT construction dust extractor is fitted with the DEWALT connection system. The allows for a fast, secure connection between the hose 7 and power tool. The connector 13 connects directly to DEWALT compatible tools or through the use of an adapter (available from your local DEWALT supplier). Refer to the Accessories section for detail on available adapters.
   NOTE: If using an adapter ensure it is firmly attached to the tool outlet before following the steps below.

OPERATING INSTRUCTIONS

Caster installation (Fig. A, F)

1. Invert the dust box and install the casters to the bottom of the dust tank and fix them with screws.
2. Return dust tank assembly upright.
   Accessory bag holder assembly (Fig. A, F) Attach 2 accessory bag holder brackets to tank with 4 self-tapping screws provided.

Remove / Change Used Dust Collection Bag (Fig. A)
WARNING: Appropriate personal protective equipment like dust mask and gloves should be used while handling used dust bags.

1. Turn off vacuum and unplug cord from outlet.
2. Unlatch lid latches 5 and remove vacuum head 4 .
3. Pull the disposable dust bag carefully from vacuum port .10
4. Seal the disposable dust bag opening tightly when removing it from the machine.
5. Dispose disposable dust bag in appropriate container according to statutory provisions.

Wet Pick Up Applications (Fig. A, G)
WARNING: If foam or liquid escapes from the machine,switch off immediately.
CAUTION: Clean the water level limiting device regularly and examine it for signs of damage.
Refer to Fig. G.

NOTICE: DO NOT remove ball float 14 , doing so will cause damage to the vacuum. The ball float keeps water from entering the motor.
Before using the vacuum for wet pick up:

• Ensure the canister is empty and free of excessive dust. Remove filters 9 .
  WARNING: Do not use the machine with this set up for dust Class L.

To Empty Canister (Fig. A, G)
The ball float valve 14 will block air to the motor when the canister is full and the sound of the motor will change at once.
When the motor has a high pitched sound and air/water flow stops, empty the canister.

1. Turn off vacuum and unplug cord from outlet.
2. Unlatch lid latches 5 and remove vacuum head 4 .
3. Empty contents of dust tank 6 into a suitable container or drain.

To Convert Back to Dry Vacuum Operation (Fig. A)

1. Empty Canister, refer to To Empty Canister instructions.
2. Place dust tank upside down position until dry. DO NOT use wet canister for dry pick up.
3. Place vacuum head 4 on a level surface until dry.
4. Reinstall filters when vacuum head is dry. See Filters under Maintenance.
5. When dust tank is dry place the vacuum head 4 onto the canister and secure it by closing the lid latches 5 .

Shut Down/Transportation (Fig. A)

1. Turn on/off control switch
2. Unplug the unit. handle/cord wrap 1 as shown.
3. When transporting in vehicles, secure the machine.

MAINTENANCE

The DEWALT appliance has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper appliance care and regular cleaning.

WARNING: To reduce the risk of injury, turn appliance off and disconnect appliance from power source before installing and removing accessories ,before adjusting or changing set-ups or when making repairs. An accidental start-up can cause injury.

WARNING: For user servicing, the machine must be dismantled, cleaned and serviced, as far as is reasonably practicable, without causing risk to the maintenance staff and others. Suitable precautions include, decontamination before dismantling, provision
for local filtered exhaust ventilation where the machine is dismantled, cleaning of the maintenance area and suitable personal protection.

• The manufacturer, or an instructed person, shall perform a technical inspection at least annually, consisting of, for example, inspection of the filter for damage, air tightness of the machine and proper function of the control mechanism.
• When carrying out service or repair operations, all contaminated items which cannot be satisfactorily cleaned, are to be disposed of; such items shall be disposed of in impervious bags in accordance with any current regulation for the disposal of such waste.
• For dust extractors it is necessary to provide for an adequate air change rate L in the room if the exhaust air is returned to the room.

(NOTE: Reference to National Regulations is necessary.)

Filter (Fig. A, H, I)
FILTER CARE
The filters included with this vacuum are long life filters. To be effective in minimizing dust recirculation, the filters MUST be installed correctly and in good condition.
WARNING: Appropriate personal protective equipment like dust mask and gloves should be used while handling the filters.

To Remove  Clean Connect Filter

1. Turn on/off control switch to the OFF position ( O ) and unplug cord from outlet.

2. Release lid latches 5 and remove vacuum head 4 . from canister. Place vacuum head on a level surface upside down.

3. Turn each filter 9 counterclockwise by gripping it on the plastic end cover as shown, and carefully remove from head, ensuring debris does not fall into mounting hole.
   NOTE: Use care to not damage filter material.

4. If the bottom side of the vacuum head needs to be cleaned, use a cloth dampened with water and mild soap and allow it to dry. Dispose of cloth in an appropriate container.

5. Inspect filters for wear, tears or other damage.
   NOTE: If there is any doubt on the condition of the filters they MUST be replaced. DO NOT continue use if filters are damaged.

WARNING: Never use compressed air or a brush to clean filters, otherwise damage to the filter membrane will occur which will allow dust to pass through the filter. If needed, gently tap against a hard surface or rinse with room temperature water and let air dry. Cleaning of the filters is typically unnecessary, even if the filter is covered with dust. The automatic filter cleaning system maintain maximum performance and continue to function. If visual damage to the filter membrane exists, replace filters. Filters typically last between six and twelve months depending on use and care.

To Install Clean Connect Filter

1. Ensure filter seal is in place and is secure.

2. Line up filter threads to vacuum head threads and using moderate force, turn filter clockwise until tight.
   NOTE: Use care to not damage filter material.

3. Place the vacuum head onto the container and secure it by closing the canister latches .

Empty The Tank (Fig. J)
WARNING: To reduce the risk of injury from accidental starting, unplug power cord before emptying the dust tank.

1. Remove the power head assembly of the wet/dry vac by pulling outward on the lid clips located on each side of the vac. Lift off the power head assembly.

2. Dump the tank contents into the proper waste
   disposal container.

3. Liquids may be emptied through the tank drain. To empty, turn the unit off and remove the plug from the wall outlet. Remove the drain cap and deposit the liquid waste contents in a suitable drain. After tank is empty, return the drain cap to its original position. To continue use, plug the cord into the wall outlet and turn the unit on.

Storage (Fig. A)

1. Empty the dust tank, refer to To Empty dust tank instructions.
2. Clean the vacuum inside and outside. Refer to Cleaning.
3. Clean or replace filters, refer to Filters.
4. Store the suction hose and the power cord as shown in the Fig. A. Place the appliance in a dry room and secure it from unauthorized use.

Optional Accessories
WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with the appliance could be hazardous.
To reduce the risk of injury, only DEWALT recommended accessories should be used with this product.

CLEANING
To keep your wet/dry vac looking its best, clean the outside with a cloth dampened with warm water and mild soap.

To clean the tank:

1.  Dump out debris.
2. Wash tank thoroughly with warm water and mild soap.
3. Wipe with dry cloth.

TROUBLESHOOTING

WARNING:
TO REDUCE THE RISK OF INJURY FROM MOVING PARTS AND/OR ELECTRICAL SHOCK, TURN POWER SWITCH OFF AND DISCONNECT GROUNDED PLUG FROM ELECTRICAL OUTLET BEFORE PERFORMING TROUBLESHOOTING CHECKS.
Minor problems often can be fixed without calling customer service.

Ensure the on/off switch is in the ON position ( I )
Suction capacity decreases| Remove blockages in the suction nozzle, suction tube, suction hose or filters.
Replace the paper or fleece bag.
Check for proper installation of the filters.
Clean or replace the filters.
Empty canister, refer to Empty the tank under Operating. instructions
Vacuum stops running| Thermal overload has been tripped: 1.Turn the vacuum off and disconnect vacuum cleaner from power source. 2.Empty the canister, if needed. 3.Allow the unit to cool. 4.Plug the power cord into an appropriate outlet and turn on/off switch to the ON position ( I ) to test.
Dust comes out while vacuuming| Check for proper installation of the filters.
Ensure filters are not damaged; replace if necessary.
Ensure filter seals are in place and are secure.

WARNING: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
WARNING: This product is NOT to bused for faltering of pathogens, for example COVID-19. Follow all local, state and federal guidance on general cleaning practices.

__

Belgique et
Luxembourg België en Luxemburg

| D E WALT – Belgium BVBA
Egide Walschaertsstraat 16 2800 Mechelen| Tel: NL 32 15 47 37 63
Tel: FR 32 15 47 37 64
Fax: 32 15 47 37 99| __

www.dewalt.be Enduser.be@SBDinc.com

---|---|---|---
__

Bosnia-Herzegovina

| G-M &M D.O.O. BRVACE 11
1290 GROSUPLJE
SLOVENIJA| Tel: +386 01 78 66 500
Fax: +386 01 78 63 023| __

www.g-mm.si gmm@g-mm.si

__

Bulgaria

| TASHEV-GALVING LTD
68 KLIMENT OHRIDSKI BLVD.
1756 SOFIA, BULGARIA| Tel: +359 2 700 45 45 4
Fax: +359 (2) 439 21 12| __

www.tashev-galving.com

__

Croatia

| G-M &M D.O.O. BRVACE 11
1290 GROSUPLJE
SLOVENIJA| __

Tel: +386 01 78 66 500

Fax: +386 01 78 63 023

| __

www.g-mm.si gmm@g-mm.si

__

Czech Republic

| BAND SERVIS CZ S.R.O. K PASEKAM 4440
760 01 ZLÍN, CZECH REPUBLIC| Tel.: +420 577 008 550
Fax.: +420 577 008 559| __

www.dewalt.cz www.bandservis.cz

__

Danmark

| D E WALT
Roskildevej
22 2620 Albertslund| Tel.: +420 577 008 550
Fax.: +420 577 008 559| __

www.dewalt.dk kundeservice.dk@sbdinc.com

__

Deutschland

| D E WALT
Richard Klinger Str. 11 65510 Idstein| __

Tel: 06126-21-1
Fax: 06126-21-2770

| __

www.dewalt.de infodwge@sbdinc.com

__

∆ λλάρ

| | Τηλ : 00302108981616
Φαξ : 00302108983570|

www.dewalt.gr Greece.Service@sbdinc.com

__

España

| D E WALT Ibérica, S.C.A.
Parc de Negocios “Mas Blau”
Edificio Muntadas, c/Bergadá, 1, Of. A6 08820 El Prat de Llobregat (Barcelona)| Tel: 934 797 400
Fax: 934 797 419| __

www.dewalt.es respuesta.postventa@sbdinc.com

__

Estonia

| AS TALLMAC MUSTAME TEE 44, EE-10621 TALLINN| T: +372 6562999
F: +372 6562855| __

www.tallmac.ee/est

__

France

| D E WALT
5, allée des Hêtres
CS60105, 69579 Limonest Cedex| Tel: 04 72 20 39 20
Fax: 04 72 20 39 00| __

www.dewalt.fr scufr@sbdinc.com

Schweiz Suisse Svizzera| D E WALT
In der Luberzen 42 8902 Urdorf| Tel: 044 – 755 60 70
Fax: 044 – 730 70 67| __

www.dewalt.ch service@rofoag.ch

__

Hungary

| ROTEL KFT.
1163 BUDAPEST,THÖKÖLY ÚT 17.| Tel +36 1 404-0014
Fax+36 1 403-2260| __

www.dewalt.hu service@rotelkft.hu

__

Ireland

| D E WALT 210 Bath Road; Slough, Berks SL1 3YD, UK| Tel: +44 (0)1753 511234
Fax: +44 (0)1753 512365| __

www.dewalt.ie

__

Italia

| D E WAL
ia Energypark
20871 Vimercate (MB), IT| Tel: 800-014353
039 9590200
Fax: 39 039 9590313| __

www.dewalt.it

__

Latvia

| LIC GOTUS SIA ULBROKAS STR. LT – 1021 R Ī GA| __

T: +371 67556949
F: +371 67555140

| __

www.licgotus.lv

__

Lithuania

| UAB ELREMTA OU NERIES KR. 16E LT – 48402 KAUNAS| T: +370-685-2903 F: +370-37-406540| __

info@elremta.lt

__

Malta

| __

ENERGYPARK–BUILDING 03 SUD, VIA ENERGY PARK 620871 VIMERCATE (MB), ITALIA

|
Tel. 039-9590-200
Fax 039-9590-313| __

www.2helpU.com

__

Nederlands

| __

D E WALT Netherlands BV Postbus 83

| Tel: 31 164 283 063
Fax: 31 164 283 200| __

www.dewalt.nl Enduser.NL@SBDinc.com

__

Norge

| D E WALT

Postboks 4613, Nydalen

0405 Oslo

| | __

www.dewalt.no kundeservice.no@sbdinc.com

__

Österreich

| D E WALT

Werkzeug Vertriebsges m.b.H Oberlaaerstrasse 248, A-1230 Wien

| __

Tel: 01 – 66116 – 0
Fax: 01 – 66116 – 614

| __

www.dewalt.at service.austria@sbdinc.com

__

Poland

| ERPATECH
UL. BAKALIOWA 26
05-080 MO Ś CISKA| Tel.: +48 22 431 05 00
Fax.: +48 22 468 87 35| www.dewalt.pl www.erpatech.pl/serwis serwis@erpatech.pl
__

Portugal

| D E WALT Limited, SARL
Centro de Escritórios de Sintra Avenida Almirante Gago Coutinho, 132/134, Edifício 14 2710-418 Sintra| __

Tel: 214 66 75 00
Fax: 214 66 75 80

| __

www.dewalt.pt resposta.posvenda@sbdinc.com

GUARANTEE

DEWALT EUROPEAN POWER TOOLS 3 YEARS GUARANTEE
DEWALT is confident of the quality of its products and offers an outstanding guarantee for professional users of the product. This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
Subject to the DEWALT European PPT Guarantee terms and conditions available from your local DEWALT office, seller or at www.2helpU.com, if your DEWALT product becomes defective due to faulty materials or workmanship within 36 months from the date of purchase, DEWALT may replace all defective parts free of charge, or at our discretion, replace the unit free of charge.
DEWALT reserves the right to refuse any claim under this guarantee which in the opinion of the authorized repair agent is not in accordance with the stated DEWALT European Guarantee terms and conditions.
If you wish to make a claim, contact your seller or check the location of your nearest authorized DEWALT repair agent online, in the DEWALT catalogue or contact your DEWALT office at the address indicated in the instruction manual.
A list of authorised DEWALT repair agents and full details of our after-sales service is available on the Internet at: www.2helpU.com

DEWALT EUROPEAN POWER TOOL (PT) 3 YEAR GUARANTEE
The DEWALT European PT Guarantee for your product is 3 years from the date of purchase subject to the following terms and conditions.

General terms and Conditions

• The DEWALT European PT 3 Year Guarantee is available to the original DEWALT product user who has purchased  the DEWALT products from an authorised DEWALT European reseller for use in the course of their trade or profession. The DEWALT European PT Guarantee is not available to persons purchasing DEWALT product for the purpose of  resale or Hire.

• This guarantee is not transferrable. It is only available to the original DEWALT product user who has purchased the product as identified above.

• In addition to the terms and conditions outlined in this document, the terms and conditions stated in the DEWALT European PT Guarantee also apply.

• A product repair or replacement under this guarantee does not extend or renew the guarantee period. The 3 year
  guarantee period starts from the original purchase date and ends 36 months later. 1.5 This product is excluded from the DEWALT 30-1-1 policy withdrawn 01-01-2016.

• Products excluded from the DEWALT European PT 3 Year Guarantee.In addition to the product exclusions stated in the DEWALT European PT Guarantee, section 3, the following DEWALT branded products are also excluded: Fastening Tools e.g. Nailers, Powder Impact tools.
  Batteries and Chargers. Rebuilt or Reconditioned products identified with additional markings – “Factory rework” and/or “Q”. Compressors and generators.

Making a Guarantee Claim

• To make a guarantee claim contact your seller or check the location of your nearest DEWALT authorised DEWALT repair agent at www.2helpU.com.

• The DEWALT Tool must be returned to the seller or an authorised DEWALT repair agent with all parts complete,
  with the original proof of purchase.

• DEWALT reserves the right to refuse any claim under this guarantee which in the opinion of the authorised repair  agent is not due to material or manufacturing defect or in accordance with the stated DEWALT European PT Guarantee terms and conditions.

Changes to Terms and Conditions

• DEWALT reserves the right to review and amend its guarantee policies, periods and product eligibility without notice as DEWALT considers appropriate.
• Current DEWALT European PT Guarantee Terms and Conditions are available from www.2helpU.com, your local  DEWALT seller or DEWALT office.

ALTON declares that these products described under

Technical Data are in compliance with: 2006/42/EC, EN60335-1 / EN60335-2-69
These products also comply with Directive, 2011/65/EU and (EU) 2015/863
Copyright © 2023 DEWALT.
DEWALT®, the DEWALT® Logo and GUARANTEED TOUGH® are trademarks of Stanley Black & Decker Inc, or an affiliate thereof and are used under license.

Manufactured under license by Alton Europe BV
ADD: Logistiekweg 18 4906 AB Oosterhout The Netherlands
For Customer Service please visit our Online Customer Service Centre at www.2helpU.com

References

• 2helpU
• Autorizovaný servis elektrického nářadí, půjčovna nářadí, prodejna nářadí
• BANDSERVIS
• Elektrowerkzeuge | Aufbewahrung | Landschaftsbau | DEWALT Deutschland
• Elektrisch gereedschap | Opbergsystemen | Landscaping | DEWALT
• Elektrowerkzeuge | Aufbewahrung | Landschaftsbau | DEWALT
• Power Tools | Storage | Landscaping | DEWALT
• DEWALT® Power Tools Official Site | Guaranteed Tough®
• Elektrické nářadí | Úložné systémy | Zahrada | DEWALT Česko
• Elektrowerkzeuge | Aufbewahrung | Landschaftsbau | DEWALT Deutschland
• Elværktøj | Opbevaring | Landskabspleje | DEWALT Denmark
• Herramientas Eléctricas | Almacenamiento | Jardinería | DEWALT España
• Outils électroportatifs | Rangement | Jardin | DEWALT
• Ηλεκτρικά εργαλεία | Αποθήκευση | Διαμόρφωση τοπίου | DEWALT
• Elektromos szerszámok | Tárolás | Tereprendezés | DEWALT
• Power Tools | Storage | Landscaping | DEWALT
• Elettroutensili | Storage | Giardinaggio | DEWALT Italia
• Elektrisch gereedschap | Opbergsystemen | Landscaping | DEWALT
• Elektroverktøy | Oppbevaring | Landskapspleie | DEWALT Norge
• Strona Główna | DEWALT
• Ferramentas Elétricas | Armazenamento | Paisagismo | DEWALT PORTUGAL
• Scule electrice | Depozitare | Peisagistică | DEWALT
• Elverktyg | Förvaring | Trädgårdsmaskiner | DEWALT Sverige
• Serwis – Erpatech
• Trgovina z orodjem DeWalt, Black & Decker, Makita,..
• Licgotus
• Ташев-Галвинг ООД: магазин за машини, инструменти, строителни материали, крепежи и градинска техника
• Start | Thomas Zien

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>