muRata 2JV Bluetooth Low Energy Module Instruction Manual
- June 1, 2024
- muRata
Table of Contents
muRata 2JV Bluetooth Low Energy Module
Product Information
Specifications:
- Model Name: 2JV
- FCC ID: VPYLBCA1ZZ2DV
- Peak Gain: +1.0 dBi
- Type: Monopole
- Connector: Trace
Product Usage Instructions
Installation:
Follow the installation manual for proper dimensions and marking details.
FCC Compliance:
This device complies with part 15 of the FCC Rules. Ensure the following
conditions are met:
- The device should not cause harmful interference.
- The device must accept any interference received.
Antenna List:
Refer to the antenna list for compatible antennas for this device.
Radiation Exposure Guidelines:
For safety, it is recommended to install and operate the device with the
radiator at least 20cm or more away from a person’s body.
Host Device Indication:
Ensure the host device contains the Transmitter Module FCC ID VPYLBCA1ZZ2DV
or Contains FCC ID VPYLBCA1ZZ2DV for compliance.
FAQ (Frequently Asked Questions)
-
Q: What FCC rules does this device comply with?
A: This device complies with Part 15 Subpart C of the FCC Rules. -
Q: How far should the radiator be kept away from a person’s body?
A: It is recommended to keep the radiator at least 20cm or more away from a person’s body for safety reasons.
FCC
This device is the bluetooth low energy module.
Model Name: 2JV
FCC ID: VPYLBCA1ZZ2DV
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This device complies with below part 15 of the FCC Rules. Part 15 Subpart C. Since there is no space which indicates FCC ID on this module, FCC ID is indicated in a manual. If the FCC ID is not visible when the module is installed inside another device, then the module is installed must also display a label referring to the enclosed module. The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed.
Antenna list.
| Part number | Vendor | Peak Gain(dBi) | Type | Connector |
|---|---|---|---|---|
| Type2JV_Model1 | Murata | +1.0 | Monopole | Trace |
| Type2JV_Model2 | Murata | 0 | Monopole | Trace |
The following information must be indicated on the host device of this module.
- Contains Transmitter Module FCC ID: VPYLBCA1ZZ2DV
- Contains FCC ID: VPYLBCA1ZZ2DV
FCC Compliance Information
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
*If it is difficult to describe this statement on the host device due to the size, please describe in the user’s manual and also either describe on the device packaging or on a removable label attached to the device.
The following statements must be described on the user manual of the host device of this module;
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines as this equipment has very low levels of RF energy. ［※］
But it should be installed and operated keeping the radiator at least 20cm or more away from the person’s body.
Dimensions, Marking
| marking | Meaning |
|---|---|
| A | Pin 1 Marking |
| B | Murata Logo |
| C | 2D Code |
| D | Module Type |
| Mark | dimensions |
| --- | --- |
| L | 5.6±0.25 |
Terminal Configurations
No| Terminal Name| No| Terminal Name| No| Terminal
Name| No| Terminal Name| No| Terminal Name
---|---|---|---|---|---|---|---|---|---
A-1| GND| C-9| P1_15| G-9| P1_04| L-9| P0_31| Q-9| GND
A-2| LED_6_P0_28| C-10| GND| G-10| P1_11| L-10| P0_11_M33_SWCLK| Q-10| ANT_OUT
A-3| LED_4_P0_19| D-1| P1_13_GPADC_4| H-1| P1_12_GPADC_5| M-1|
P0_09_UART_BOOT_TX| R-1| GND
A-4| LED_2_P0_21| D-2| P1_20| H-2| P1_02| M-2| P0_26| R-2| GND
A-5| LED_1_P0_24| D-9| P1_14| H-9| P1_04| M-9| P0_12_CMAC_SWDIO| R-3| GND
A-6| LED_5_P0_29| D-10| LX| H-10| P0_02| M-10| P0_10_M33_SWDIO| R-4| GND
A-7| LED_3_P0_20| E-1| P1_19_GPADC_7| J-1| GND| N-1| P0_16| R-5| GND
A-8| LED_0_P0_13| E-2| P1_22| J-2| P1_06| N-2| P0_07| R-6| GND
A-9| GND| E-9| P1_16| J-9| P0_01| N-9| GND| R-7| GND
A-10| GND| E-10| LY| J-10| P0_00| N-10| GND| R-8| GND
B-1| USBP_P0_14| F-1| P1_09_GPADC_7| K-1| P0_08_UART_BOOT_RX| P-1| P0_06| R-9|
GND
B-2| LED_7_P0_27| F-2| P1_10| K-2| P1_00| P-2| P0_17| R-10| GND
B-9| GND| F-9| P0_30| K-9| P1_03| P-9| GND| |
B-10| VBAT| F-10| P1_17| K-10| P1_05| P-10| ANT_IN| |
C-1| USBM_P0_15| G-1| P1_18_GPADC_6| L-1| P0_25_GPADC_1| Q-1| ＲＳＴn| |
C-2| P1_21| G-2| P1_07| L-2| P1_01| Q-2| P0_18| |
Land Pattern TOP View
Operating condition
*The output level can be varied by changing the value of the power index within the scope of the application. (power setting: -18, -12, -8, -6, -3, -2, -1, 0, 1.5, 2, 3, 4, 4.5, 5dBm)
Recommended pattern for antenna part
- Model 1 antenna recommended pattern (green) between these terminals as follow.
The distance (thickness) between the green pattern and the lower ground is 200 microns.
*Consideration should be given to change applications for traces other than the design specified in the manual. - Model 2 antenna recommended pattern (green) between these terminals as follow.
*Consideration should be given to change applications for traces other than the design specified in the manual.
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.