DEPSTECH ES170 Dual Lens Endoscope Camera with Light User Manual

DEPSTECH ES170 Dual Lens Endoscope Camera with Light

Specifications:

• Model: DEPSTECH Industrial Endoscope
• Camera Diameter:
  • Single Camera: 7 mm (0.28in)
  • Dual Camera: 7.9 mm (0.31 in)
• Best Focal Range:
  • Single Camera: 4-8cm (1.57-3.15 in)
  • Dual Camera:
  • A: 3-10 cm (1.18-3.93 in)
  • B: 2-6 cm (0.79-2.36 in)
• CameraView Screen Spec: 5″ IPS Screen
• Photo Resolution: 1920*1080
• Video Spec: 1080p / 15-30fps
• Battery Life: 3-4 hours
• Charging Time: 3-4 hours
• Charging Voltage and Current: DC5V/2A

Product Usage Instructions

1. Powering On the Endoscope:
   To power on the endoscope, press and hold the power button until the screen lights up.

2. Adjusting Camera Focus:
   Use the focus adjustment dial on the endoscope to set the camera focus to the desired range based on your inspection needs.

3. Capturing Photos and Videos:
   Press the corresponding buttons on the device to capture photos or start recording videos during your inspection.

4. Viewing Photos and Videos:
   You can view captured photos and videos directly on the 5″ IPS screen of the endoscope.

5. Charging the Endoscope:
   Connect the Type-C charging cable to the endoscope and a power source with DC5V/2A to charge the device. The charging time is approximately 3-4 hours.

Packing List:

• Endoscope (Without TF card)
• User Manual
• Type-C Charging Cable
• Accessories

Product Features

• DEPSTECH is a booming technology company, specialized in creating various endoscopes and committed to make you feel more secure.
• DS620 is a high-performance industrial endoscope, equipped with 5 inch IPS high-definition display, has the camera and video functions and saves into TF memory card. Such camera uses high-performance CMOS chip that supports the record-high frame rate to get clear images with Bluart 3.0 technology, widely used in industrial maintenance, appliance maintenance, mechanical maintenance and design and other fields.

Special Warning and Notice

• This product is a camera of industrial endoscope, not applicable to medical or physical examination!
• In order to lengthen the battery life, it is recommended that you should charge the device once every 3 months whether ii is used.
• Do not try to replace internal battery by yourself, because unprofessional operation may lead to risks of personal injury due to battery overheating, etc.

Safety and Protection

• Probe of camera is an electronic device of high precision, so please do not hit the probe of camera or pull the cables, which may lead to failure of the device.
• With IP67 waterproof layer, the probe shall be used with extra care and protected from scratches!
• Camera probe is made from materials that are not high temperature resistant, so make sure the internal temperature of any internal combustion engine or other equipment whose internal temperature is higher has been cooled when they are examined, otherwise the device will be directly damaged!
• In case of device damaged, please do not dismantle it by yourself, but contact the seller or the supplier for more professional maintenance services.
• Children may not use this device independently without the guidance of adults.

Operating and Storage Environments

• The device should be operated at an ambient temperature of 32-113°F (0-45°().
• The device should be stored in a dry, clean, oil-free and waterless place without any chemical liquid.

Product Introduction

Front

1. Hold this button for 2s to power on/off the endoscope

2. Single press lo lake a photo or end !he video record
   Hold this button for 2s lo slart a video record

3. Click to increase the LED lights brightness of the camera
   Move the cursor down(When in the menu)

4. Click to dim the LED lights ot the camera
   Move the cursor up(ln lhe menu)

5. Click to rolale lhe real-lime image 180°

   • Hold this button for 2s lo switch main/side camera (Only available for dual and triple-lens products)
   • Click on the button to relurn to the previous level(When in the menu)

6. Hold this button for 2s lo enler/exit lhe album
   Click to confirm the selections (When in the menu)

7. Click to enter the menu

8. Bottom

9. TF Card Slot

   • Support up to 32G TF card
   • Please format ii on tirst use

10. Type-C Charging Port

    • For charging (Type-C cable connected to the adapter)
    • For data transmission (Type-C cable connected to PC client)

11. 4D Reset Button

    • Short click the reset button with the reset pin, the device will be shut down and reset.

12. Charging Status LED Indicator

    • Red LED indicator flashes : Charging
    • Red LED indicator stays on : Charging tinished

13. Lanyard Hole

UI Introduction

Preview

Album

Language Setting
Default language of the device is English; If other language is required, please follow the steps below:

1. Click the button to enter menu interface, select Language by pressing the arrow button and then press the button, enter the language setting interface.
2. Click button to select the language you need, and then press OK button to switch the language.
3. Click the button to return the Main Interface.

PhotoNideo

1. Take photos by pressing button.
2. Long press to start a video recording, single press to the end video recording.

View PhotoNideo

1. Long press in preview mode to enter the photo album.
2. Press to view photos, and Click to play videos.
3. Long press   to exit the photo album.

Delete PhotoNideo

1. When viewing photos/videos, press to enter the photo/video detail page.
2. Press to choose to delete the current file or all files.

Lens Switching
(Only available for dual and triple lens products)
When the product is turned on, it opens the main lens by default, long press the button 2s can switch the lens (Main Lens – Side Lens – Split Screen – Main Lens)

TF Card Formatting

1. On the preview interface, press the button to enter the menu;
2. Press to select “Format” options;
3. Press OK to enter the option interface, Select “OK”;
4. Wait for the formatting to complete.

Copy Photo And Video Files To Computer

1. Use a TF card reader to copy data directly.
2. Use a Type-C cable to connect to computer for copying Setting path.
3. Please connect the product to your computer.
4. Select “Data transmission”.

Charging Instructions

1. Connect the device to the DC 5V adapter for charging;
2. The red indicator light flashes when the device is charging, and is always on when fully charged.C

Guide For Accessories Installation

Installation method:

Specifications

Packing List

FCC Requirement: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the   following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

X CE compliance: This device complies with EN 60065 standard, which means this device will not do harm to the user or products as following situations:

1. Electric shock
2. High temperature
3. Radiation
4. Explosion from inner
5. Mechanical Harm
6. Fire Hazard ?)Chemical burns.

X EU Conformity Statement: This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/35/EU, the RoHS Directive 2011/65/EU and Amendment (EU) 2015/863. X WEEE

Notice : 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info

X 2013/56/EU (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point.

For more information see : www.recyclethis.info

• EC REP: E-CrossStu GmbH. Meinzer Landstr.69,60329 Frankfurt am Main
• UK REP: DST Co.,Ltd. Fifth Floor 3 Gower Street, London, WC1 E SHA, UK

Customer Services
Please contact us if you have any questions, we love to hear from you

• www.depstech.com
• support@depstech.com
• Facebook Official Page: @DEPSTECH. FANS

Shenzhen Deepsea Innovation Technology Co., Ltd.
Room 1901-1902, Jingizhigu Building, No. 1 Tangling Road, Nanshan District, 518055, Shenzhen, CN

Made in China

FAQ

Q: How do I change the camera mode in a dual-camera endoscope?
A: To switch between camera modes in a dual-camera endoscope, use the mode selection button located on the device.

Q: What is the recommended maintenance for the endoscope?
A: To maintain optimal performance, ensure to clean the camera lens and cable after each use using a soft cloth or alcohol wipe.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>