DEPSTECH WF010 FHD Inspection Camera User Manual
- June 6, 2024
- DEPSTECH
Table of Contents
FHD Inspection Camera
WF010
User Manual
Product Structure
-
Power Button ON/OFF
-
Camera LEDs dimmer: Roll to control the brightness of the camera LEDs
-
WiFi signal indicator:
Blue LED falsh: Ready to pair
Blue LED stay on: Connect successfully -
Power indicator:
Red LED stays on: Power system work normally
Red LED flash: Low battery
Green LED stays on: Charging status -
Reset Button:
Long press the reset button for 4-7s and then release it, the WiFi and power indicator will turn off and restart, and the product will restore to factory settings. -
Micro-USB charging port
Operation Guide
Step 1 – Download the APP
iOS (iOS 9 or above) users download DEPSTECH from APP Store.
Android (Android 5.0 or above) users download DEPSTECH from Google
Play.
Note:
We respect your requirement for privacy protection, and we will do our best to
protect your privacy. For the first use, DEPSTECH may need your permission to
access your albums or photos/ WLAN/ cellular data network/ local network, etc.
It’s essential to enable those permissions to get the real-time images. Please
enable the above permissions to ensure the normal functionality of the APP. If
some functions are disabled, please go to Settings > DEPSTECH to enable
corresponding features.
Step 2 – Power-on
Take out the endoscope and find the transmitter. Move the toggle switch to “ ON ” to activate the WF010 endoscope.
Note:
Before using the product for the first time, please fully charge it.
-
Power LED indicators:
About 2 seconds after you power on.
Red LED stays on: The power system work normally.
Red LED flash: Low battery.
Green LED stays on: Charging status. -
WIFI LED indicators:
About 5 seconds after you power on, the blue LED falsh that means ready to pair.
Blue LED stay on: Connect successfully.
Please wait 10-15 seconds to search the WIFI signal after powering on.
Step 3 – Wi-Fi Connection
A. Turn on the Wi-Fi of your mobile phone/ pad and search the endoscope
Wi-Fi.
The default name is Jetion_****
B. Select it and input the default Wi-Fi password: 12345678
Note:
- **** is a set of random numbers and letters. It may take a few seconds to search the Wi-Fi signal and successfully connect it.
- If your phone prompts “The Internet is unavailable. Do you want to keep connected or access to other networks such as the cellular data network?”, please click “Keep Connected”.
Step 4 – Start your first use!
Note:
If the endoscope and your smart device connect successfully, you can receive
real-time images of the endoscope via the DEPSTECH APP , and the blue LED
of the endoscope Wi-Fi transmitter will stay on.
APP
| 
---|---
You can reset the WiFi name/password once you have got the smart device
connected with the endoscope.
Reset WiFi name: Click it to enter WiFi name
Reset WiFi password: Click it to enter WiFi password
Resolution: Click it to switch the resolution
After setup, please remember to click the “Modify WiFi
name/password/resolution” button.
Note:
We wouldn’t recommend our customers modify the Wi-Fi SSID/Password.
Which may do disadvantages for next usage. (Once you’ve forgotten the modified
Wi-Fi SSID/ Password) So you’d better write down the modified Wi-Fi
SSID/Password if you have to do it.
Charging Guide
Connect the device to the DC 5V USB adapter for charging;
During the charging process, the green LED indicator light will be steady.
When the device is fully charged, the green LED indicator will go out.
Guide for Accessories Installation
Product parameter
Optical sensor| CMOS
Resolution| Max. 1920*1080px
Viewing angle| 67°±3°
Depth of field| 1.96-11.8 inches
Diameter of the lens tube| 8.5mm
Working voltage and current| DC 5V/2A
Wi-Fi frequency bands| 2.4G
WiFi Transmission Distance| 5m (without any obstacles)
Waterproof Grade| IP67 (for lens/tube only)
FAQs and Answers
Q1: While the endoscope is in use, can other apps be connected to the
Internet normally?
A1: It depends on your device. iOS users can go to Settings > select the
DEPSTECH APP > enable cellular data network. For Android users, it depends on
the OS permissions of different brands of mobile phones.
You can go to Settings > Developer options > Networking > turn on “Mobile data
always active” and “Tethering hardware acceleration” to try.
Q2: Can I connect the endoscope to a smart home system or home Wi-Fi
network?
A2: The endoscope cannot be connected to smart platforms or the home Wi-
Fi network. If the Wi-Fi SSID/ password is set to be the same as other
portable hotspots by mistake, it will cause abnormal communication with the
endoscope. If you accidentally set the Wi-Fi SSID/ password of the endoscope
to be the same as the home Wi-Fi network, you can use the needle in the
accessories or a ballpoint pen to press the reset button at the bottom of the
device and the Wi-Fi SSID/ password will be reset to factory default settings.
Note: In case you forget the initial Wi-Fi SSID/ password, we have
printed them on the label on the back of the device for your reference.
Q3: What should I do if there is no image on the app, or the connection
fails or the image freezes?
A3: It may be caused by multiple reasons. Please follow the instructions
below.
a. Please turn on the “Airplane Mode” and try to open the DEPSTECH
application again.
b. For iOS 14 users, after installing the DEPSTECH APP for the first
time, you may need to go to Settings > DEPSTECH > turn on Local Network and
Cellular Network. Then stop the app from running in the background. Finally,
restart the app.
c. Please check if you have input the correct Wi-Fi password. (Note: If
you have changed your password, please keep it in mind. If you’ve forgot it,
you can refer to A2 to reset the Wi-Fi name/ password.)
d. Please check if the Wi-Fi box is fully charged. The insufficient
battery may cause connection failure. Please charge it in time.
e. Restart the Wi-Fi box and reconnect it to your phone. Exit the APP and
then restart it.
f. Uninstall the DEPSTECH APP and then install the latest version.
g. Please make sure the Wi-Fi box is within 5 meters away from your
phone, and there are no obstacles between them.
h. When using this Wi-Fi endoscope, please keep it away from other Wi-Fi
hotspots with a strong signal, or turn off other hotspots.
e. Restart the Wi-Fi box and reconnect it to your phone. Exit the APP and
then restart it.
f. Uninstall the DEPSTECH APP and then install the latest version.
g. Please make sure the Wi-Fi box is within 5 meters away from your
phone, and there are no obstacles between them.
h. When using this Wi-Fi endoscope, please keep it away from other Wi-Fi
hotspots with a strong signal, or turn off other hotspots.
Note: If the malfunction cannot be solved after the above operations, please contact us via email [email protected]
SAFETY & MAINTENANCE INFO
For your safety and better user experience, please read the instructions carefully before using.
-
Please remember to turn off the endoscope and place it in a dry environment after peruse. You can use a soft cotton cloth with little alcohol to keep the camera lens clear, which also does great help to capture the best image. Besides, for every three months, you should charge and use your electric devices regularly, which will do great help to extend the battery life.
-
The storage temperature should between 32-158℉. And the working temperature should be between 32-113℉. Besides, the Childs can only operate this device with the guidance of adults, please don’t let them operate the device alone.
-
Please keep the device away from fire source/ liquid/ acidic. These may increase the risk of electrical shocks and damages of the device.
-
The unit is not shock-resistant. Please avoid high impact results from things such as dropping the unit from height.
-
The lens and the tube are water-resistant when the unit is fully assembled, but the Wi-Fi box isn’t. This means IP67 waterproof only available for the camera probe part, and the camera part support underwater inspections within 3.33ft/ 30 mins.
Note: Do not immerse the Wi-Fi box in water -
According to the guidance of WEEE, attention should be given to the environmental aspects of battery disposal.
-
It’s normal that the camera will turn hot, especially when the camera LED turn to the brightest level, but it won’t affect the regular usage or the lifespan of the endoscope.
-
The Wi-Fi transmission distance is about 16.5ft without any obstacles. Please keep the distance between the Wi-Fi box and the phone/ tablet within 16.5ft.
-
Please Keep the unit away from strong Wi-Fi disturb areas while using. Otherwise, it may affect the Wi-Fi connection between the Wi-Fi box and the smartphone.
EU Conformity Statement
This product and – if applicable – the supplied accessories too are marked
with “CE” and comply therefore with the applicable harmonized European
standards listed under the EMC Directive 2004/108/EC, the RoHS Directive
2011/65/EU and Amendment (EU) 2015/863.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info
2013/56/EU (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with
this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb),
or mercury (Hg). For proper recycling, return the battery to your supplier or
to a designated collection point. For more information see:
www.recyclethis.info
FCC Statement: This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interface;
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
EC REP 1: Like Sun GmbH. Planckstr.59, 45147 Essen, Germany
EC REP 2: DST Co., Ltd. Fifth Floor 3 Gower Street, London, WC1E 6HA, UK
Customer Services
Please contact us if you have any questions,
we love to hear from you
www.depstech.com
[email protected]
Facebook Official Page: @DEPSTECH.FANS
Shenzhen Deepsea Innovation Technology Co., Ltd.
Room 1901-1902, Jinqizhigu Building, No.1 Tangling Road, Nanshan District,
518055, Shenzhen, CN
MADE IN CHINA
Documents / Resources
|
DEPSTECH WF010 FHD Inspection
Camera
[pdf] User Manual
WF010, FHD Inspection Camera
---|---
|
DEPSTECH WF010 FHD Inspection
Camera
[pdf] User Manual
WF010 FHD Inspection Camera, FHD Inspection Camera, Inspection Camera