DEPSTECH WF010 HD Industrial Endoscope User Manual
- June 6, 2024
- DEPSTECH
Table of Contents
Hello
User Manual
Applicable to Depstech®WF010 HD
Industrial Endoscope
Thank you for choosing Depstech®WF010
HD Industrial Endoscope!
DEPSTECH WF010, a wireless industrial endoscope, designed
to improve the efficiency of the car or pipeline repair. We hope it can
help you save time and explore more of the surrounding
microworld.
It would be recommended that you download the latest version of
the electronic manual on our official website
www.depstech.com
You may download it through these steps: open our official website and find the navigation bar; Then click Support and then find “Downloads> Wi-Fi Endoscope> WF010”; click Endoscope and then Wi-Fi Endoscope; scroll the page down to find WF010 industrial endoscope; scroll the WF010 endoscope page down to find the Download button and click it. Then you can then download the WF010 User Manual.
For any bits of help or suggestions, please feel free to contact us. Here is
the way to contact us.
Email: support@depstech.com
Official Facebook: @DEPSTECH.FANS
Please attach your Order Number and Product Model in the email, which will
greatly improve the efficiency of email communication!
Thank you for your support!
Step 1: Download the APP
iOS (iOS 9 or above ) users download DEPSTECH-View from APP Store
Android (Android 5.0 or above ) users download
DEPSTECH-View from Google Play
Windows 10 users download DEPSTECH-View from Microsoft Store
Note:
1. For Windows 7 users, please download the corresponding Depstech-view.exe
on our official website (www.depstech.com)
2. We respect your requirement for privacy protection, and we will do our
best to protect your privacy. For the first use, DEPSTECH-View may need your
permission to access your albums or photos/ WLAN/ cellular data network/ local
network, etc. It’s essential to enable those permissions to get the real-time
images. Please enable the above permissions to ensure the normal functionality
of the APP. If some functions are disabled, please go to Settings-> DEPSTECH-
View to enable corresponding features.
Step 2- Power-on
Take out the endoscope and find the transmitter. Move the toggle switch to
“ON” to activate the WF010 endoscope.
Note:
Before the first use, please fully charge the device. If the red LED stays on,
it indicates the power system works properly.
When the blue LED flashes, it means that the Wi-Fi is ready to pair. It
usually takes 15-20 seconds from turning on the device till you can search for
the Wi-Fi signal.
Step 3-Wi-Fi connection
A. Turn on the Wi-Fi of your mobile phone/ pad or Windows laptop and search
the endoscope Wi-Fi. The default name is
DEPSTECH_ WF010- **
B. Select it and input the default Wi-Fi password: 12345678
Note:
1. ** is a set of random numbers and letters. It may take a few seconds
to search for the Wi-Fi signal and successfully connect it. Please be patient.
2. If your phone prompts ”The Internet is unavailable. Do you want to keep
connected or access to other networks such as the cellular data network?”,
please click “Keep Connected”
Step 4-Start your first use!
Open the DEPSTECH-View app downloaded to your smart device in Step 1. You
can now get real-time images through DEPSTECH -View! Try it now!
Note:
If the endoscope and your smart device connect successfully, you can receive
the real-time images of the endoscope via the DEPSTECH-View app, and the blue
LED of the endoscope Wi-Fi transmitter will stay on. For Android users, please
select the connection type as “Wi-Fi”.
Product structure
Charging Guide
Connect the endoscope to an adapter/ PC/ laptop or a power bank through the
USB-A to Micro USB cable in the package for charging (DC 5V/2A).
Note:
During charging, the green LED will stay on. When the endoscope is fully
charged, the green LED will turn off. Please note that the power source shall
be DC 5V/2A. Please use the USB port computer/ power bank or adapter that
meets the specifications to charge the device.
Guide for Accessories Installation
The three included accessories (90° side mirror, hook and magnet) should all be connected to the camera tips in the same way as shown in the picture above.
APP
Button Hiding Function : Click the screen to wake up/ hide buttons.
Digital Zoom Function: The APP supports digital zoom. Put your two fingers on the screen, to spread and narrow on the screen to zoom in and out.
Resolution : Click it to switch the resolution.
Wi-Fi settings : If there is no device connected, you can click it to
jump to the Wi-Fi settings interface.
You can reset the Wifi SSID/ password once you’ve got the smart device
connected with the endoscope
Note:
If not necessary, please do not turn to the reset process. It’s advised that
the Wi-Fi name be different from your home Wi-Fi, otherwise, it may cause
signal interference and equipment abnormality
Channel switching: If there is 2.4G signal interference nearby, click it
to switch channels.
Reset Wi-Fi name : Click it to reset the Wi-Fi name.
reset-Fi password : Click it to reset the Wi-Fi password.
One-key reset : After inputting the new Wi-Fi name and password, click
“One-key reset” (If not necessary, please do not use it for reset
FAQs and Answers
Q1: While the endoscope is in use, can other apps be connected to the Internet normally?
A1: It depends on your device. IOS users can go to Settings> select the
DEPSTECH-View app> enable cellular data network. For Android users, it depends
on the OS permissions of different brands of mobile phones. You can go to
Settings> Developer options> Networking> turn on “Mobile data always active”
and ‘Tethering hardware acceleration” to try.
Q2: Can I connect the endoscope to a smart home system or home Wi-Fi network?
A2: The endoscope cannot be connected to smart platforms or the home Wi-Fi
network. If the Wi-Fi SSID/ password is set to be the same as other portable
hotspots by mistake, it will cause abnormal communication with the endoscope.
If you accidentally set the Wi-Fi SSID/ password of the endoscope to be the
same as the home Wi-Fi network, you can use the needle in the accessories or a
ballpoint pen to press the reset button at the bottom of the device and hold
it for seven seconds. Once the reset is successful, Wi-Fi will restart, the
blue light on the transmitter panel will flash, and the Wi-Fi SSID/ password
will be reset to factory default settings.
Note: In case you forget the initial Wi-Fi SSID/ password, we have
printed them on the label on the back of the device for your reference.
FAQ& Help
Q3: What should I do if there is no image on the app, or the connection fails,
or the image freezes?
A3: It may be caused by multiple reasons. Please follow the instructions
below.
a. Please turn on the “Airplane Mode” and try to open the DEPSTECH-View
application again.
b. For iOS 14 users, after installing the DEPSTECH-View app for the first
time, you may need to go to Settings> DEPSTECH-View> turn on Local Network and
Cellular Network. Then stop the app from running in the background. Finally,
restart the app.
c. Please check if you have input the correct Wi-Fi password. (Note: If you
have changed your password, please keep it in mind. If you’ve forgotten it,
you can refer to A2 to reset the Wi-Fi name/ password.)
d. Please check if the Wi-Fi box is fully charged. The insufficient battery
may cause connection failure. Please charge it in time.
e. Restart the Wi-Fi box and reconnect it to your phone. Exit the APP and then
restart it.
I. Uninstall the DEPSTECH-View APP and then install the latest version.
g. Please make sure the Wi-Fi box is within 10 meters away from your phone,
and there are no obstacles between them.
h. When using this Wi-Fi endoscope, please keep it away from other Wi-Fi
hotspots with a strong signal, or turn off other hotspots.
Note: If the malfunction cannot be solved after the above operations, please
contact us via email at support@depstech.com
SAFETY & MAINTENANCE INFO
For your safety and better user experience, please read the instructions
carefully before using.
Please remember to turn off the endoscope and place it in a dry environment
after peruse. You can use a soft cotton cloth with little alcohol to keep the
camera lens clear, which also does great help to capture the best image.
Besides, for every three months, you should charge and use your electric
devices regularly, which will do great help to extend the battery life.
The storage temperature should between 32-158F. And the working temperature
should be between 32-113F. Besides, the Childs can only operate this device
with the guidance of adults, please don’t let them operate the device alone.
Please keep the device away from fire source/ liquid/ acidic. These may
increase the risk of electrical shocks and damages to the device.
The unit is not shock-resistant. Please avoid high impact results from
things such as dropping the unit from height.
The lens and the tube are water-resistant when the unit is fully assembled,
but the Wi-Fi box isn’t. This means IP67 waterproof is only available for the
camera probe part, and the camera part support underwater inspections within
3.33ft/ 30 mins.
Note: Do not immerse the Wi-Fi box in water
According to the guidance of WEEE, attention should be given to the
environmental aspects of battery disposal.
It’s normal that the camera will turn hot, especially when the camera LED turn
to the brightest level, but it won’t affect the regular usage or the lifespan
of the endoscope.
The Wi-Fi transmission distance is about 33ft without any obstacles. Please
keep the distance between the Wi-Fi box and the phone/ tablet within 33ft.
Please Keep the unit away from strong Wi-Fi disturb areas while using.
Otherwise, it may affect the Wi-Fi connection between the Wi-Fi box and the
smartphone.
EU
Conformity Statement
This product and – if applicable – the supplied accessories too are marked
with “CE” and comply therefore with the applicable harmonized European
standards listed under the EMC Directive 2004/108/EC,
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recycle-this.info
2013/56/EU (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info
- FCC statement: This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interface;
- This device must accept any interference received, including interference
that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
EC REP 1:
Like Sun GmbH
Planckstr.59, 45147 Essen, Germany
ec-connection@web.de| EC REP 2:
DST Co., Ltd
Fifth Floor 3 Gower Street, London, WC1E 6HA, UK
www.dsteu.com
---|---
Shenzhen Deepsea Innovation Technology Co., Ltd.
Room 1901-1902, Jinqizhigu Building, No.1 Tangling Road, Nanshan District,
518055, Shenzhen, CN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>