VOX WMI1270T15B Washing Machine User Manual
- August 16, 2024
- VOX
Table of Contents
VOX WMI1270T15B Washing Machine
Specifications
- Operating voltage/frequency: 220-240 V~/50Hz
- Total current: 10 A
- Water pressure: Maximum 1 Mpa / Minimum 0.1 Mpa
- Total power: 2100 W
- Maximum washing capacity (dry laundry): 7 kg
Safety Instructions
Read the safety instructions carefully to ensure safe operation of your washing machine.
General Safety Warnings
Follow the advice given to protect yourself and others from risks and fatal injuries.
- Risk of Burns: Do not touch the drain hose or any discharged water while the Washing Machine is running to avoid burn risks.
- Risk of Death from Electrical Current: The machine must be carried by at least 2 people to prevent accidents.
During Use
Ensure proper precautions are taken during use to prevent accidents or injuries.
Packaging and Environment
Remove packaging materials carefully and recycle them to reduce waste production and environmental impact.
FAQs
Q: Can I use this washing machine for commercial purposes?
A: No, this machine is designed for domestic use only. Using it for
commercial purposes will void the warranty.
Q: Where can I get a softcopy of the user manual?
A: For a softcopy of the user manual, please contact
washingmachine@standardtest.info
with the model name and serial number (20 digits) found on the appliance door.
Washing Machine / User Manual WMI1270T15B
Thank you for choosing this product.
This User Manual contains important safety information and instructions on the
operation and maintenance of your appliance.
Please take the time to read this User Manual before using your appliance and
keep this book for future reference.
Meaning Serious injury or death risk
Dangerous voltage risk Warning; Risk of fire / flammable materials
Injury or property damage risk Operating the system correctly
· Do not install your machine on a carpet or such grounds that would prevent
the ventilation of its base.
· The appliance is not intended for use by people (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
· Children of less than 3 years should be kept away unless continuously
supervised.
· Call the nearest authorized service centre for a replacement if the power
cord malfunctions.
· Use only the new water inlet hose coming with your machine when making water
inlet connections to your machine. Never use old, used or damaged water inlet
hoses.
· Children should not play with the appliance. Cleaning and user maintenance
should not be made by children without supervision.
NOTE: For a softcopy of this user manual, please contact the following
address: “washingmachine@standardtest. info”. In your e-mail, please provide
the model name and serial number (20 digits) which you can find on the
appliance door.
Read this user manual carefully.
Your machine is for domestic use only. Using it for commercial purposes will
cause your warranty to be cancelled.
This manual has been prepared for more than one model therefore your appliance
may not have some of the features described within. For this reason, it is
important to pay particular attention to any figures whilst reading the
operating manual.
General Safety Warnings
· The necessary ambient temperature for operation of your Washing Machine is
15-25 °C.
· Where the temperature is below 0 °C, hoses may split or the electronic card
may not operate correctly.
· Please ensure that garments loaded into your Washing Machine are free from
foreign objects such as nails, needles, lighters and coins.
· It is recommended that for your first wash, you select the 90° Cotton
programme without laundry and half fill compartment II of the detergent drawer
with a suitable detergent.
· Residue may build up on detergent and softeners
exposed to air for a long period of time. Only put softener or detergent in
the drawer at the beginning of each wash. · Unplug your Washing Machine and
switch off the water supply if the Washing Machine is left unused for a long
time. We also recommend that you leave the door open to prevent build up of
humidity inside the Washing Machine. · Some water may be left in your Washing
Machine as a result of quality checks during production. This will not affect
the operation of your Washing Machine. · The packaging of the machine could be
hazardous to children. Do not allow children to play with the packaging or
small parts from the Washing Machine. · Keep the packaging materials in a
place where children cannot reach them, or dispose of them appropriately. ·
Use pre-wash programs only for very dirty laundry. Never open the detergent
drawer while the machine is running. · In the event of a breakdown, unplug the
machine from the mains supply and turn the water supply off. Do not attempt to
carry out any repairs. Always contact an authorised service agent. · Do not
exceed the maximum load for the washing programme you have chosen. Never force
the door open when your Washing Machine is running. · Washing laundry
containing flour may damage
EN – 3
your machine. · Please follow the manufacturers’ instructions
regarding the use of fabric conditioner or any similar products that you
intend to use in your Washing Machine. · Make sure that the door of your
Washing Machine is not restricted and can be opened fully. Install your
machine in a location that can be fully ventilated and preferably has constant
air circulation.
Read these warnings. Follow the advice given to protect yourself and others
from risks and fatal injuries.
RISK OF BURNS
Do not touch the drain hose or any discharged water while your Washing Machine
is running. The high temperatures involved pose a burn risk.
RISK OF DEATH FROM ELECTRICAL CURRENT
· Do not connect your Washing Machine to the mains electricity supply using an
extension lead.
· Do not insert a damaged plug into a socket. · Never remove the plug from the
socket by pulling
the cord. Always hold the plug. · Never touch the power cord/plug with wet
hands as this could cause a short circuit or electric shock. · Do not touch
your Washing Machine if your hands or feet are wet. · A damaged power
cord/plug can cause fire or give you an electric shock. When damaged
EN – 4
it must be replaced, this should only be done by qualified personnel. Risk of
flooding · Check the speed of water flow before placing the drain hose in a
sink. · Take necessary measures to prevent the hose from slipping. · Water
flow may dislodge the hose if it is not properly secured. Make sure the plug
in your sink does not block the plug hole. Danger of Fire · Do not store
inflammable liquids near your machine. · The sulphur content of paint removers
may cause corrosion. Never use paint removing materials in your machine. ·
Never use products that contain solvents in your machine. · Please ensure that
garments loaded into your Washing Machine are free from foreign objects such
as nails, needles, lighters and coins. Risk of fire and explosion Risk of
falling and injury · Do not climb on your Washing Machine. · Make sure hoses
and cables do not cause a trip hazard. · Do not turn your Washing Machine
upside down or on its side. · Do not lift your Washing Machine using the door
or detergent drawer.
EN – 5
The machine must be carried by at least 2 people.
Child safety · Do not leave children unattended near the
machine. Children might lock themselves in the machine resulting in risk of
death. · Do not allow children to touch the glass door during operation. The
surface becomes extremely hot and may cause damage to skin. · Keep packaging
material away from children. · Poisoning and irritation may occur if detergent
and cleaning materials are consumed or come into contact with the skin and
eyes. Keep cleaning materials out of the reach of children.
1.2 During Use
· Keep pets away from your machine. · Please check the packaging of your
machine
before installation and the outer surface of the machine once the packaging
has been removed. Do not operate the machine if it appears damaged or if the
packaging has been opened. · Your machine must only be installed by an
authorised service agent. Installation by anyone other than an authorised
agent may cause your warranty to be void. · This appliance can be used by
children aged 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way
and understand the
EN – 6
hazards involved. Children shall not play with the appliance. Cleaning and
user maintenance shall not be done by children without supervision. · Only use
your machine for laundry that is labelled as suitable for washing by the
manufacturer. · Before operating the washing machine, remove the 4 transit
bolts and rubber spacers from the rear of the machine. If the bolts are not
removed they may cause heavy vibration, noise and malfunction of the machine
and cause the guarantee to be void. · Your warranty does not cover damage
caused by external factors such as fire, flooding and other sources of damage.
· Please do not throw away this user manual; keep it for future reference and
pass it onto the next owner. NOTE: Specifications for the machine may vary
depending on the product purchased. Replacement of drive belt, only by
authorized service. Only original spare belt must use.
1.3 Packaging and Environment Removal of packaging materials Packaging
materials protect your machine from any damage that might occur during
transportation. The packaging materials are environmentally friendly as they
are recyclable. Use of recycled material reduces raw material consumption and
decreases waste production.
EN – 7
1.4 Savings Information Some important information to get the most efficient
use out of your machine: · Do not exceed the maximum load for the washing
programme you have chosen. This will allow your machine to run in energy
saving mode. · Do not use the pre-wash feature for lightly soiled laundry.
This will help you save on the amount of electricity and water consumed.
CE Declaration of conformity We declare that our products meet the applicable
European Directives, Decisions and Regulations and the requirements listed in
the standards referenced. Disposal of your old machine
The symbol on the product or on its packaging indicates that this product may
not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this
product. For more detailed information about recycling of this product, please
contact your local city office, your household waste disposal service or the
shop where you purchased the product.
EN – 8
2. TECHNICAL SPECIFICATIONS
3
2
1
2.1 Technical Specifications
4
Operating voltage /
(220-240)
frequency V~/50Hz
(V/Hz)
5
Total current (A)
10
Water
Maximum: 1 Mpa
6
pressure
(Mpa)
Minimum : 0.1
Mpa
7
8
Total power (W)
2100
9
10
Maximum 7 dry laundry
capacity (kg)
General Appearance 1. Electronic Display 2. Programme Dial 3. Upper Tray 4. Detergent Drawer 5. Drum 6. Pump Filter Cover 7. Water Inlet Valve 8. Power Cable 9. Discharging Hose 10. Transit Bolts
Spinning revolution (rev / min)
1200
Programme number
15
Dimensions (mm)
Height
845
Width
597
Depth
497
EN – 9
3. INSTALLATION
3.1 Removing the Transit Bolts
3.2 Adjusting the Feet / Adjusting Adjustable Stays
X4
X4
1
2
X4
3
4
1. Before operating the washing machine, remove the 4 transit bolts and
rubber spacers from the rear of the machine. If the bolts are not removed,
they may cause heavy vibration, noise and malfunction of the machine and void
the warranty.
2. Loosen the transit bolts by turning them anticlockwise with an appropriate
spanner.
3. Remove the transit bolts with a straight pull.
4. Fit the plastic blanking caps supplied in the accessories bag into the
gaps left by the removal of the transit bolts. The transit bolts should be
stored for future use.
NOTE: Remove the transit bolts
before using the machine for the first time. Faults occurring due to the
machine being operated with transit bolts fitted are out of the scope of the
warranty.
1
1. Do not install your machine on a surface (such as carpet) that would
prevent ventilation at the base.
· To ensure silent and vibration-free operation of your machine, install it on
a firm surface.
· You can level your machine using the adjustable feet.
· Loosen the plastic locking nut.
X4
2
3
2. To increase the height of the machine, turn the feet clockwise. To
decrease the height of the machine, turn the feet anticlockwise.
· Once the machine is level, tighten the locking nuts by turning them
clockwise.
3. Never insert cardboard, wood or other similar materials under the machine
to level it.
· When cleaning the ground on which the machine is located, take care not to
disturb the level of the machine.
3.3 Electrical Connection
· Your Washing Machine requires a 220240V, 50 mains supply.
EN – 10
· The mains cord of your washing machine is equipped with an earthed plug.
This plug should always be inserted to an earthed socket of 10 amps.
· If you do not have a suitable socket and fuse conforming with this, please
ensure the work is carried out by a qualified electrician.
· We do not take responsibility for damage that occurs due to the use of
ungrounded equipment.
NOTE: Operating your machine
with low voltage will cause the life cycle of your machine to be reduced and
its performance to be restricted. 3.4 Water Inlet Hose Connection
3/4″
2 1
10 mm
3
4
1. Your machine may have either a single water inlet connection (cold) or double water inlet connection (hot and cold) depending on the machine specifications. The white capped hose
should be connected to cold water inlet and red capped hose to the hot water
inlet (if applicable). · To prevent water leaks at the joints, either 1 or 2
nuts (depending on your machine’s specifications) are supplied in the
packaging with the hose. Fit these nuts to the end(s) of the water inlet hose
that connect to the water supply.
2. Connect new water inlet hoses to a ¾ , threaded tap.
· Connect the white capped end of the water inlet hose to the white water
inlet valve on the rear side of the machine and the red capped end of the hose
to the red water inlet valve (if applicable).
· Hand tighten the connections. If in any doubt, consult a qualified plumber.
· Water flow with pressure of 0. 1-1 Mpa will allow your machine to operate at
optimum efficiency (pressure of 0. 1 Mpa means that more than 8 litres of
water per minute will flow through a fully opened tap).
3. Once you have made all of the connections, carefully turn the water supply
on and check for leaks.
4. Ensure that the new water inlet hoses are not trapped, kinked, twisted,
folded or crushed.
· If your machine has a hot water inlet connection, the temperature of the hot
water supply should not be higher than 70°C.
NOTE: Your Washing Machine
must only be connected to your water supply using the supplied new fill hose.
Old hoses must not be reused.
~ 95 cm ~ 145 cm
~ 140 cm ~ 95 cm
0 max. 100 cm
~ 95 cm
~ 150 cm EN – 11
3.5 Water Discharge Connection
4.1 Detergent Drawer (*)
· Connect the water drain hose to a standpipe or to the outlet elbow of a household sink, using additional equipment.
· Never attempt to extend the water drain hose.
· Do not put the water drain hose from
1
your machine into a container, bucket or
bathtub.
2
· Make sure that the water drain hose is
not bent, buckled, crushed or extended.
3
· The water drain hose must be installed
at a maximum height of 100 cm from the ground.
4
4. CONTROL PANEL OVERVIEW
1
2
3
1. Detergent Drawer 2. Programme Dial 3. Electronic Display
5
6
1. Liquid Detergent Attachments () 2. Main Wash Detergent Compartment 3.
Softener Compartment 4. Pre-Wash Detergent Compartment 5. Powder Detergent
Levels () 6. Powder Detergent Scoop () () Specifications may vary depending
on the machine purchased.
EN – 12
4.2 Sections Main wash detergent compartment:
4.3 Program Dial
This compartment is for liquid or powder detergents or limescale remover. The fluid detergent level plate will be supplied inside your machine. (*) Fabric conditioner, starch, detergent compartment:
· To select the desired programme, turn the programme dial either clockwise or
anti-clockwise until the marker on the programme dial points to the chosen
programme.
· Make sure that the programme dial is set exactly to the programme you want.
4.4 Electronic Display
1 6
This compartment is for softeners, conditioners or starch. Follow the
instructions on the packaging. If softeners leave residue after use, try
diluting them or using a liquid softener. Pre-wash detergent compartment:
2
34 5 7
This compartment should be used only when the pre-wash feature is selected. We recommend that the pre-wash feature is used only for very dirty laundry. (*) Specifications may vary depending on the machine purchased.
1. Electronic Display 2. Digital Display 3. Water Temperature Adjustment
Button
4. RPM Speed Adjustment Button
5. Additional Function Button 1 6. Start/Pause Button
7. Start/Pause Button Lamp
The display panel shows the washing delay timer (if set), temperature
selection, spin speed, any additional functions selected. The display panel
shows “End” when the selected programme is complete. The display panel also
indicates if a fault has occurred with your machine.
EN – 13
5. USING YOUR WASHING MACHINE
5.1 Preparing Your Laundry
1
3
curtains or place them in a washing net or bag. 6. Reverse textiles such as pants, knitwear, t-shirts and sweat shirts. 7. Wash socks, handkerchiefs and other small items in a washing net.
2
Can be
Normal
bleached
Do not bleach
washing
Maximum
Maximum
4
ironing temperature
150°C
ironing temperature
200°C
Do not iron
DGVDSH
Can be dry cleaned
No dry cleaning
Dry flat
5
6
Drip dry
Hang to dry
Do not tumble dry
7
1. Follow the instructions given in the care labels on the clothing.
· Separate your laundry according to type (cotton, synthetic, sensitive, wool
etc. ), washing temperature (cold, 30°, 40°, 60°, 90°) and the degree of
dirtiness (slightly stained, stained, highly stained).
F
Dry cleaning in gas oil,
pure alcohol and R113 is
allowed
P
A
Perchloroethylene Perchlorinetyhlene
R11, R13,
R11, R113, Gas
Petroleum
oil
5.2 Putting Laundry in the Machine
2. Never wash coloured and white laundry together.
· Dark textiles may contain excess dye and should be washed separately several
times.
3. Ensure that there are no metallic materials on your laundry or in the
pockets; if so, remove them.
CAUTION: Any malfunctions
which occur due to foreign materials damaging your machine are not covered by
the warranty. 4. Close zips and fasten any hooks and
eyes. 5. Remove the metallic or plastic hooks of
· Open the door of your machine.
· Spread your laundry evenly in the machine.
NOTE: Take care not to exceed
the maximum load of the drum as this will give poor wash results and cause
creasing. Refer to the washing programme tables for information on load
capacities. The following table shows approximate
EN – 14
weights of typical laundry items:
LAUNDRY TYPE Towel Linen
Bathrobe Quilt cover Pillow slip Underwear Tablecloth
WEIGHT (gr) 200 500 1200 700 200 100 250
· Load each item of laundry separately.
· Check that no items of laundry are trapped between the rubber seal and the
door.
· Gently push the door until it clicks shut.
of the detergent drawer. Do not exceed the MAX level. · Thick softeners may
cause clogging of the drawer and should be diluted. · It is possible to use
fluid detergents in all programmes without a pre-wash. To do this, slide the
fluid detergent level plate () into the guides in compartment II of the
detergent drawer. Use the lines on the plate as a guide to fill the drawer to
the required level. () Specifications may vary depending on the machine
purchased.
5.4 Operating Your Machine
click
1
2
· Make sure the door is fully closed, otherwise the programme will not start.
5.3 Adding Detergent to the Machine The amount of detergent you will need to
put in your machine will depend on the following criteria: · If your clothes
are only slightly soiled,
do not pre-wash. Put a small amount of detergent (as specified by the
manufacturer) into compartment II of the detergent drawer.
· If your clothes are excessively soiled, select a programme with pre-wash and
put ¼ of the detergent to be used into compartment I of the detergent drawer
and the rest in compartment II.
· Use detergents produced for automatic washing machines. Follow the
manufacturer’s instructions on the amount of detergent to use.
· In areas of hard water, more detergent will be required.
1. Plug your machine in to the mains supply.
2. Turn on the water supply. · Open the machine door. · Evenly spread your
laundry in the
machine. · Gently push the door until it clicks shut.
5.5 Selecting a Programme Use the programme tables to select the most
appropriate programme for your laundry.
5.6 Half-Load Detection System Your machine features a half-load detection
system. If you put less than half the maximum load of laundry into your
machine it will automatically set the half-load function, regardless of the
programme you selected. This means that the selected programme will take less
time to complete and will use less water and energy.
· The amount of the detergent required will increase with higher washing
loads.
· Put softener in the middle compartment
(*)Machinery specifications may vary depending on the product purchased.
EN – 15
5.7 Additional Functions
1. Temperature Selection
Use the washing water temperature adjustment button to alter the automatically
programmed washing water temperature.
3. Delay Timer
When you select a programme the maximum temperature for that programme is
automatically selected. To adjust the temperature, press the water temperature
adjustment button until the desired temperature is displayed on the digital
display. You can gradually decrease the washing water temperature between the
maximum washing water temperature of the selected programme and cold washing
(- – C) selections by pressing the temperature adjustment button. 2. Spin
Speed Selection
When you select a programme, the maximum spin speed is automatically selected.
To adjust the spin speed between the maximum spin speed and the cancel
spinning option (- – -), press the Spin speed button until the desired speed
is displayed. If you have skipped the spin speed you want to set, keep
pressing the spin speed adjustment button until the desired spin speed is
displayed again.
Auxiliary function button 3 Delay Timer
You can use this auxiliary function to delay the start time of the washing
cycle for 1 to 23 hours .
To use the delay function: · Press the delay key once.
· “01h” will be displayed. will light up on the electronic display.
· Press the delay key until you reach the time after which you want the
machine to start the washing cycle.
· If you have skipped the delay time you would like to set, you can keep
pressing the delay key until you reach that time again.
· To use the time delay function, you need to press the Start/Pause key to
start the machine.
· If you want to cancel the delay:
– If you have pressed the Start/Pause key to start the machine, you just need
to press the delay key once. will go off on the electronic display.
– If you have not pressed the Start/ Pause key, press the delay key
continuously until goes off on the electronic display. will go off on the
electronic display.
NOTE: In the case that you want
to select the auxiliary function feature, if the auxiliary function LED is not
on, this means that this feature is not being used in the washing programme
you have selected.
EN – 16
4. Anti- Allergic(*)
6. Pre-Wash(*)
Auxiliary function button 3 Anti- Allergic
You can add an additional rinse operation to your laundry using this
additional function. Your machine will carry out all rinsing steps with hot
water. We recommend this setting for laundry worn on delicate skin, baby
clothes and underwear. To select this function, press the Antiallergic button
when the symbol is displayed. 5. Easy Ironing(*)
Auxiliary function button 3 Pre-Wash
This additional function allows you to give heavily soiled laundry a pre-wash
before the main washing programme takes place. When using this function, put
detergent in front washing compartment of the detergent drawer. To select this
function, press the Pre-wash button when the symbol is displayed.
7. Extra Rinse(*)
Auxiliary function button 3 Easy Ironing
Auxiliary function button 3 Extra Rinse
Using this function will result in your laundry being less wrinkled at the end of the selected washing programme. To select this function, press the Easy ironing button when the symbol is displayed.
You can add an additional rinse operation to the end of the selected wash
programme using this additional function. To select this function, press the
Extra rinse button when the symbol is displayed.
8. Rapid Wash(*)
Auxiliary function button 3 Rapid Wash
You can wash your laundry in a shorter time, using less energy and water by
selecting this additional function. We recommend that you only use this option
if you are washing less than half the maximum dry load for the selected
programme. To select this function, press the Rapid wash button when the
symbol is displayed.
EN – 17
NOTE: If you put less than
half the maximum load of laundry into your machine the half-load function will
be automatically set, regardless of the programme you selected. This means
that the selected programme will take less time to complete and will use less
water and energy. When your machine detects half load, the symbol is displayed
automatically.
9. No Spin()
Auxiliary function button 3 No Spin
If you don’t want to perform wringing on your laundry, you can use this
auxiliary function. You may make the programme active by pressing the wringing
cancel button on the display panel when the led light of the symbol turns on.
10. Cold Wash()
Start/Pause button
By pressing on the Start/Pause button, you may start the programme you have
selected or suspend a running programme. If you switch your machine to the
standby mode, the Start/Pause led on the electronic display will blink.
5.8 Child Lock The Child Lock function allows you to lock the buttons so that
the wash cycle you have chosen cannot be changed unintentionally. To activate
child lock, press and hold button 2 and 3 simultaneously for at least 3
seconds. `’CL” will flash on the electronic display for 2 seconds when the
child lock is activated.
Auxiliary function button 3 Cold Wash
You can use this auxiliary function when you want to wash your laundry with
cold water (tap water). You may make the programme active by pressing the cold
washing button on the display panel when the led light of the symbol turns on.
(*)Machinery specifications may vary depending on the product purchased.
If any button is pressed or selected programme is changed by the programme
dial while the child lock is active, the “CL” symbol will flash on the
electronic display for 2 seconds.
If the child lock function is active and a programme is running, when the
programme dial is turned to the CANCEL position and another programme is
selected the previously selected programme continues from where it was left.
To deactivate the child lock, press and hold button 2 and 3 simultaneously for
at least 3 seconds until the “CL” symbol on the electronic display disappears.
EN – 18
5.9 Cancelling the Programme To cancel a running programme at any time: 1.
Turn the programme dial to the
“STOP” position. 2. Your machine will stop the washing
operation and the programme will be cancelled. 3. Turn the programme dial to
any other programme to drain the machine. 4. Your machine will perform the
necessary draining operation and cancel the programme. 5. You can now select
and run a new programme. 5.10 Programme End
Your machine will stop by itself as soon as the programme you have selected
finishes. · “END” will flash on the electronic
display. · You can open the machine’s door and
remove the laundry. · Leave the door of your machine open
to allow the inner part of your machine to dry. · Switch the programme dial to
STOP position. · Unplug your machine. · Turn the water tap off.
EN – 19
6. PROGRAMME TABLE
Washing temperature
(°C) Maximum dry laundry amount
(kg) Detergent compartment Programme duration (Min.)
Programme
Laundry type / Descriptions
COTTON 60°
*60-90-80-70-40
ECO 40-60
*40 – 60
COTTON PREWASH
*60 – 50 – 40 – 30 “- -C”
COTTON 20°
*20- “- -C”
COLOR COTTON
*40 – 30 – “- -C”
WOOL 30°
*30 – “- -C”
RINSE ALLERGY FREE
”- -C” 60 – 50 – 40 – 30 –
“- -C”
Very dirty, cotton and flax textiles.
7
2 145 (Underwear, linen, tablecloth, towel
(maximum 3,5 kg), bedclothes, etc.)
Dirty cotton and flax textiles.
7
2 208 (Underwear, linen, tablecloth, towel
(maximum 3,5 kg), bedclothes, etc.)
Dirty cotton and flax textiles.
7
1&2 164 (Underwear, linen, tablecloth, towel
(maximum 3,5 kg), bedclothes, etc.)
Less dirty, cotton and linen textiles.
3,5
2
59
(Underwear, bedsheet, tablecloth,
towel (max. 2,0 kg) bedcloth, etc.)
Less dirty, cotton and linen textiles.
7
2 130 (Underwear, bedsheet, tablecloth,
towel (max. 3,5 kg) bedcloth, etc.)
2,5
2
43
Woollen laundries with machine wash labels.
Provides an additional rinse to any
7
–
30
type of laundry after the washing
cycle.
3,5
2 197
Baby laundry
SPIN
*”- -C”
You can use this program for
7
–
17
any type of laundry if you want an additional spin step after the
washing cycle.
DELICATE 30° SYNTHETICS 40°
MIX 40°
30 – “- -C” 40 – 30 – “- -C” *40 – 30 – “- -C”
JEANS/DARK 30°
*30 – “- -C”
(**) RAPID 60’I60°
*60 – 50 – 40 – 30 “- -C”
(***) QUICK 15’I30°
*30 – “- -C”
2,5
2
90
Laundry recommended for hand wash or sensitive laundry.
Very dirty or synthetic-mixed textiles.
3,5
2 135
(Nylon socks, shirts, blouses,
synthetic-including trousers etc. )
3,5
2
105
Dirty cotton, synthetics, colour and flax textiles can be washed together.
Black and dark items made of
cotton, mixed fibre or jeans. Wash
3,5
2
96
inside out., Jeans often contains excess dye and may run during the
first few washes. Wash light and
dark coloured items separately
Dirty, cotton, coloured and linen
3
2
60
textiles washed at 60°C in 60
minutes.
In a short time of 15 minutes, Lightly
2
2
15
soiled, cotton, colored and linen
textiles your can wash.
EN – 20
NOTE: PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF LAUNDRY, TAP
WATER, AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.
() Washing water temperature of the programme is the factory default. () If
your machine has the rapid wash auxiliary function, you can enable the quick
wash option on the display panel and load the machine with 2 kg or less
laundry to wash it in 30 minutes. () Due to the short washing time of this
programme, we recommend that less detergent is used. The programme may last
longer than 15 minutes if your machine detects an uneven load. You can open
the door of your machine 2 minutes after the completion of a washing
operation. (The 2 minute period is not included in the programme duration).
According to regulation 1015/2010 and 1061/2010, the programme 1 and the
programme 2 are respectively the Standard 60°C cotton programme’ and the Standard 40°C cotton programme’. The Eco 40-60 programme is able to clean
normally soiled cotton laundry declared to be washable at 40°C or 60°C,
together in the same cycle, and that this programme is used to assess the
compiance with the EU ecodesign legislation.
EN – 21
· The most efficient programmes in terms of energy consumption are generally
those that perform at lower temperatures and longer duration.
· Loading the household washing machine up to the capacity indicated by the
manufacturer for the respective programmes will contribute to energy and water
savings.
· Program duration, energy consumption and water consumption values may vary
according to wash load weight and type, selected extra functions, tap water
and ambient temperature.
· It’s recommended to use liquid detergent for the washing programmes at low
temperature. The amount of detergent to be used may vary depending on the
amount of laundry and the level of dirtiness of the laundry. Please follow the
detergent manufacturers’ recommendations for the amount of the detergent to be
used.
· The noise and remaining moisture content are influenced by the spinning
speed. The higher spinning speed in the spinning phase, the higher noise and
the lower remaining moisture content.
· You can access the product database where the model information is stored by
reading the QR code on the energy label.
Energy Consumption
kWh/cycle
Programme Duration Hours:Minutes
Water Consumption
Litres/Cycle
max. Temperature
°C
Remaining Moisture Content
%
1200 Rpm
Programme Name Rated
Capacity kg
1/4 Load Rated
Capacity 1/2 Load 1/4 Load
Rated Capacity 1/2 Load 1/4 Load
Rated Capacity 1/2 Load 1/4 Load
1/2 Load
1/4 Load Rated
Capacity
1/2 Load
Rated Capacity
90°
Cotton Cotton
60°
Eco 40-60
7 2,22
03:13
69
81
53%
7 1,17
02:25
36
57
53%
7 0,89 0,34 0,21 03:28 02:42 02:42 55 40 35 44 29 23 53% 53% 53%
3,5 0,49
02:15
37
42
62%
3 0,99 3,5 0,12
01:00 00:59
31
58
53%
25
20
53%
Synthetics 40°
Rapid 60’I60°
Cotton 20°
EN – 22
6.1 Important Informations · Use detergents, softeners and other additives
suitable for automatic washing machines
only. Excessive foam has occurred and automatic foam absorption system has
been activated due to too much detergent usage. · We recommend that periodic
cleaning for washing machine every 2 months. For periodic cleaning please use
Drum Clean programme. If your machine do not have Drum Clean programme, use
Cottons-90 programme. When required, use limescale removers manufactured
specifically for washing machines only. · Never force the door open when your
Washing Machine is running. You can open the door of your machine 2 minutes
after the completion of a washing operation. · Never force the door open
when your Washing Machine is running. The door will open immediately after the
washing cycle has ended. · The installation and repairing procedures should
always carried out by the Authorised Service Agent in order to avoid possible
risks. The manufacturer shall not be held liable for damages that may arise
from procedures carried out by unauthorised persons. (*) Specifications may
vary depending on the machine purchased.
EN – 23
7. CLEANING AND MAINTENANCE
7.1 Warning
7.2 Water Inlet Filters Water inlet filters prevent dirt and foreign materials from entering your machine. We recommend that these filters are cleaned when your machine is unable to receive sufficient water, although your water supply is on and the tap is open. We recommend that you clean your water inlet filters every 2 months.
Turn your mains power supply off and remove the plug from the socket before
carrying out maintenance and cleaning of your machine.
Turn off the water supply before starting maintenance and cleaning of your
machine.
CAUTION: Do not use solvents, abrasive cleaners, glass cleaners or all-purpose
cleaning agents to clean your Washing Machine. They may damage the plastic
surfaces and other components with the chemicals they contain.
· Unscrew the water inlet hose(s) from the Washing Machine.
· To remove the water inlet filter from the water inlet valve, use a pair of
longnosed pliers to gently pull on the plastic bar in the filter.
· A second water inlet filter is located in the tap end of the water inlet
hose. To remove the second water inlet filter, use a pair of long-nosed pliers
to gently pull on the plastic bar in the filter.
· Clean the filter thoroughly with a soft brush and wash with soapy water and
rinse thoroughly. Re-insert the filter by gently pushing it back into place.
CAUTION: The filters at the
water inlet valve may become clogged due to water quality or lack of required
maintenance and may break down. This may cause a water leak. Any such
breakdowns are out of the scope of the warranty.
EN – 24
7.3 Pump Filter
1
meet the holes on the front panel side. 6. Close the filter cover.
WARNING: The water in
the pump may be hot, wait until it has
2
cooled down before carrying out any cleaning or maintenance.
3
4
5
6
The pump filter system in your Washing Machine prolongs the life of the pump
by preventing lint from entering your machine. We recommend that you clean the
pump filter every 2 months. The pump filter is located behind the cover on the
front-lower right corner. To clean the pump filter: 1. You may use the washing
powder
spade (*) supplied with your machine or liquid detergent level plate to open
the pump cover.
2. Lodge the end of the powder spade or liquid detergent level plate in the
opening of the cover and gently press backwards. The cover will open.
· Before opening the filter cover, place a container under the filter cover to
collect any water left in the machine.
· Loosen the filter by turning anticlockwise and remove by pulling. Wait for
the water to drain.
NOTE: Depending on the
amount of water inside the machine, you may have to empty the water collection
container a few times. 3. Remove any foreign materials from
the filter with a soft brush. 4. After cleaning, re-fit the filter by
inserting it and turning clockwise. 5. When closing the pump cover, ensure
that the mountings inside the cover
(*) Specifications may vary depending on the machine purchased. 7.4 Detergent
Drawer The use of detergent may cause residual build up in the detergent
drawer over time. We recommend that you remove the drawer every 2 months to
clean the accumulated residue. To remove the detergent drawer: · Pull the
drawer forwards until it is fully
extended.
· Press the region shown below inside the detergent drawer you have pulled all
the way back, and continue pulling and remove the detergent drawer from its
place
· Remove the detergent drawer and disassemble the flush stopper. Clean
thoroughly to completely remove
EN – 25
any softener residue. Refit the flush stopper after cleaning and check that it is seated properly.
8. Body / Drum
· Rinse with a brush and lots of water.
· Collect the residues inside the detergent drawer slot so that they don’t
fall inside your machine.
· Dry the detergent drawer with a towel or dry cloth and place it back
Do not wash your detergent drawer in a dishwasher. Liquid detergent
apparatus() For the cleaning and maintenance of the liquid level detergent
apparatus, remove the apparatus from its location as shown in the picture
below, and thoroughly clean the remaining detergent residues. Replace the
apparatus. Make sure that no residual material remains inside the siphon. ()
Specifications may vary depending on the machine purchased.
1
2
1. Body
Use a mild, non-abrasive cleaning agent, or soap and water, to clean the
external casing. Wipe dry with a soft cloth. 2. Drum
Do not leave metallic objects such as needles, paper clips, coins etc. in your
machine. These objects lead to the formation of rust stains in the drum. To
clean such rust stains, use a non-chlorine cleaning agent and follow the
instructions of manufacturer of the cleaning agent. Never use wire wool or
similar hard objects for cleaning rust stains.
EN – 26
9. TROUBLESHOOTING
Repair of your machine should be carried out by an authorised service company.
If your machine requires repair or if you cannot solve an issue with the
information provided below, then you should: · Unplug your machine from the
mains power supply.
· Turn off the water supply.
FAULT
POSSIBLE CAUSE
TROUBLESHOOTING
Your machine does not start.
Machine not plugged in. Fuses are faulty.
No mains power supply. Start/Pause button not pressed.
Plug machine in. Replace the fuses. Check mains power. Press the Start/Pause button.
Programme dial `stop’ position. Turn the programme dial to the desired position.
The machine door is not completely closed.
Close the machine door.
Water tap is turned off.
Turn tap on.
Water inlet hose may be twisted.
Check water inlet hose and untwist.
Your machine does not intake water.
Water inlet hose clogged. Inlet filter clogged.
Clean water inlet hose filters. () Clean the inlet filters. ()
The machine door is not completely closed.
Close the machine door.
Your machine does not discharge water.
Drain hose clogged or twisted. Pump filter clogged.
Laundry is too tighly packed together in the drum.
Check the drain hose, then either clean or untwist.
Clean the pump filter. (*) Spread your laundry in the machine evenly.
The feet have not been adjusted.
Adjust the feet. (**)
Transit bolts fitted for transportation have not been
removed.
Remove the transit bolts from the machine. (**)
Your machine vibrates.
Small load in the drum. Your machine is overloaded with
laundry or laundry is unevenly spread.
This will not prevent operation of your machine.
Do not overload the drum. Spread laundry evenly in the drum.
Your machine rests on a hard surface.
Do not set up your Washing Machine on a hard surface.
Excessive foam is formed in the detergent drawer.
Excessive amount of detergent used.
Wrong detergent used.
Press the Start/Pause button. To stop the foam, dilute one tablespoon of
softener into 1/2 litre of water and pour into the detergent drawer. Press
the Start/Pause button after 5-10 mins.
Only use detergents produced for automatic Washing Machines.
Your washing is too dirty for the Use the information in the programme tables to
programme selected.
select the most appropriate programme.
Unsatisfactory washing result.
Amount of detergent used insufficient.
Use the amount of detergent as instructed on the packaging.
There is too much laundry in your
Check that the maximum capacity for the
machine.
selected programme has not been exceeded.
EN – 27
FAULT
POSSIBLE CAUSE
TROUBLESHOOTING
Unsatisfactory washing result.
Hard water. Your laundry is too tightly packed
together in the drum.
Increase the amount of detergent following the manufacturer’s instructions.
Check that your laundry is spread out.
As soon as the machine is loaded with water, water
discharges.
The end of water drain hose is too Check that the drain hose is at a suitable height.
low for the machine.
(**) .
No water appears in the drum during washing.
No fault. Water is in the unseen part of the drum.
. . . . . . . . . . . . . . . . . . . . .
Laundry has detergent residue.
Non-dissolving particles of some detergents may appear on your
laundry as white spots.
Perform an extra rinse, or clean your laundry with a brush after it dries.
Grey spots appear on the laundry.
There is untreated oil, cream or Use the amount of detergent as instructed on the
ointment on your laundry.
packaging in the next wash.
The spin cycle does not take place or takes place later than expected.
No fault. The Unbalanced load control system has been activated.
The Unbalanced load control system will try to spread your laundry. The
spinning cycle will begin
once your laundry is spread. Load the drum evenly for the next wash.
(*) See the chapter regarding maintenance and cleaning of your machine. (**)
See the chapter regarding installation of your machine.
10. AUTOMATIC FAULT WARNINGS AND WHAT TO DO
Your Washing Machine is equipped with a built-in fault detection system,
indicated by a combination of flashing wash operation lights. The most common
failure codes are shown below.
TROUBLE CODE
POSSIBLE FAULT
WHAT TO DO
Shut the door properly until you hear a click. If
E01
The door of your machine is not shut properly.
your machine persists to indicate fault, turn off your machine, unplug it and contact the nearest
authorised service agent immediately.
Check the tap is fully turned on. Mains water
E02
The water pressure or the water level inside the machine may be low.
may be cut-off. If the problem still continues, your machine will stop after a
while automatically. Unplug
the machine, turn off your tap and contact the
nearest authorised service agent.
E03
The pump is faulty or pump filter is clogged or electrical connection of the
pump is faulty.
Clean the pump filter. If the problem persists, contact the nearest authorised service agent. (*)
Your machine will discharge water by itself. Once
E04
Your machine has excessive amount of the water has drained, turn off your machine and
water.
unplug it. Turn off the tap and contact the nearest
authorised service agent.
(*) See the chapter regarding maintenance and cleaning of your machine.
EN – 28
The minimum period which must supply the spare parts for the household washing
machine is 10 years.
https://www.voxelectronics.com callcentar@voxelectronics.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>