BABY LOCK BLE8-SF Shirring Foot Instructions
- June 12, 2024
- Baby Lock
Table of Contents
BABY LOCK BLE8-SF Shirring Foot Instructions
Shirring Foot (BLE8-SF) Instructions
For easy shirring and gathering on lightweight to medium fabrics using the overlock or chain stitch settings on your serger.
| Stitch type: | 4-Thread Overlock, 3-Thread Overlock, Chain Stitch |
|---|---|
| Stitch Width: | M-7.5 |
| Needle: | 01 and 02 |
| Stitch length: | 4 |
| Upper nnife: | Engaged “UNLOCKED” |
| Differential feed: | 2 |
| Stitch selector: | A |
| Sewing speed: | Slow to moderate |
MACHINE SETTINGS FOR OVERLOCK
- The Shirring Foot has an additional groove on the underside of the foot for
- The raised markings on the toe of the foot are seam line They indicate the needle positions to help guide your fabric for accurate seaming.
- **Replace the General-Purpose Foot with the Shirring Foot. See Machine Instruction and Reference Manual for assistance in removing and replacing the snap-on feet.
**
- Increase the stitch A stitch length of 4 is the recommended setting.
- Increase the differential feed by moving the lever towards the number 2. The higher the differential feed the more the fabric will
- For best results place fabric to be gathered right side up under the presser foot and past the grove on the underside of the
- Place the fabric up to the Turn the handwheel 3-4 turns to catch the fabric with the needles.
- Can also be used with chain
- The foot has tape sewing slots on the front to easily guide narrow ribbons, elastics and
LNIS-BLE8-SF www.BabyLock.com
Brought to You by Tacony Corporation®.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>