COLLECTIVEMINDS Strikepack Horizon Mod Pack USB-C Adapter XBOX User Manual
- June 12, 2024
- COLLECTIVEMINDS
Table of Contents
FOR XBOX SERIES XIS® – XBOX ONE®
WIRED UNIVERSAL
STRIKEPACK
HORIZON™
MOD PACK
USB-C ADAPTER XBOX®
User Manual
NOTE: THIS MANUAL HAS BEEN REVISED WITH INSTRUCTIONS THAT ARE VALID ONCE THE STRIKEPACK HORIZON™ HAS BEEN UPDATED.
INTRODUCTION
Thank you for purchasing the STRIKEPACK HORIZON TM for the Xbox Series XIS®
and Xbox One® consoles. The STRIKEPACK HORIZON TM is an app-powered wired
controller adapter that adds advanced gaming functionality to your existing
standard Xbox® controller. The adapter upgrades your controller with 4 Paddles
and provides access to M.O.D.s (Macros On Demand) via the STRIKEPACKTM Central
smartphone app for iOS 15.0 and Android 9.0, or later, all without any
permanent modification or voiding of your warranty. Simply attach the adapter
to your controller, plug in the 10ft cable, and get ready to experience
lightning reaction times and unlimited control. Pair to the app for thousands
of M.O.D. combinations and advanced configuration. Rapid Fire, Anti-Recoil,
Turbo, Button Record & Playback, and much more. The STRIKEPACK HORIZON TM is
the future of STRIKEPACKTM, and our whole team at Collective Minds is excited
to bring that future to you.
We have spent countless hours, and sleepless nights, pushing the device
through extreme game sessions, ensuring any bugs and issues have been
eradicated. However, if you find any issues or have any difficulty operating
the device, please reach out to us at
support@collectiveminds.ca and we will be
more than happy to help you out.
Also, there are plenty of videos to help you setup and maximize your fun over
at www.collectiveminds.ca and our YouTube
support channel – feel free to check them out along with our other Collective
Minds products!
KIT INCLUDES
STRIKEPACK HORIZON TM device with 4 Paddles.
10FT Connection Cable.
USB Adapter for Xbox® controller (USB-C)
USB Adapter for Xbox One® controller (Micro USB)
GETTING STARTED
STRIKEPACK HORIZON TM Setup
- We highly recommend updating to the latest STRIKEPACKTM firmware before use. You can down-load the Universal Updater Tool for Windows PC or Mac at www.collectiveminds.ca. Plug the supplied USB cable’s USB-C end into the USB guide on the STRIKEPACKTM. Ensure that you plug it in fully to make proper contact with the USB-C connection port. Now plug the full-size USB end into a USB port on your computer and use a rear USB port if possible.
- Run the Updater Tool, follow the instructions and update to the latest version available.
- Remove the battery cover and any batteries from your Xbox® Wireless Controller and store them some place safe as they will not be needed.
- Click on the image or link for how to connect the STRIKEPACKTM to your controller of choice.
- Plug the supplied USB cable’s USB-C end into the USB guide on the STRIKEPACKTM. Ensure that you plug it in fully to make proper contact with the STRIKEPACKTM’s USB-C connection port.
- Connect the full-size USB end into a USB port on your Xbox® console. It is recommended to use one of your console’s rear USB ports if possible. Please wait for the home button to illuminate before usage. Some controllers may take 3-5 seconds to detect. If the home button does not illuminate after 5 seconds, check that both connection points for the controller and STRIKEPACKTm are securely plugged in. You may have to unplug and plug back in.
- Once the home button is illuminated, the STRIKEPACKTm device is successfully paired and ready to game with!
- The STRIKEPACK HORIZON TM is an app-powered device, but without the app, you can still use Tournament Mode, map the paddles, and factory reset the device. The STRIKEPACKTM Central smartphone app is required to access GAMEPACK M.O.D.s (Macros On Demand) and advanced configuration features, such as calibration. The app can be downloaded from iOS and Google Play stores, and it requires a minimum of at least iOS 15.0 or Android 9.0, or later.
- Turn on your smartphone’s Bluetooth, then upon launching STRIKEPACKTm Central, it will find your STRIKEPACK HORIZON TM device serial and ask to connect. Accept the connection to connect to the app.
THE STRIKEPACK HORIZON™ DEVICE
Operating the STRIKEPACK HORIZON™
Once the STRIKEPACK HORIZON TM device is paired with
your Xbox® console, it will be in Tournament Mode. This will function
regardless of whether you are connected to the STRIKEPACKTM Central app.
GAMEPACK Mode on the other hand, is accessed through selecting a GAMEPACK on
the app.
Tournament Mode — Each time the STRIKEPACK HORIZON TM is paired it starts in
Tournament Mode. The Gear Head Eyes and RGB LED indicators will be WHITE.
Tournament Mode allows you full access to map buttons to Paddles but it DOES
NOT allow the use of any M.O.D.s (Macros On Demand).
GAMEPACK Mode —This mode is automatically accessed when you select a GAMEPACK
on the STRIKEPACKTM Central app. The Gear Head Eyes will pulse GREEN. The RGB
LED indicators will vary depending on the GAMEPACK but their default is GREEN.
GAMEPACKS are where you will find M.O.D.s (Macros On Demand).
Mapping Mode — This mode can be entered temporarily to map Paddles using the
controller.
MAPPING MODE
Paddle Mapping is a very simple process that can be done using the controller.
To enter Mapping Mode, HOLD either one of the Mapping Mode Buttons until the
Gear Head Eyes and RGB LED indicators turn PURPLE.
From here, while HOLDING a controller button, TAP the Paddle that you wish to
map the button to. You can HOLD up to 4 controller buttons to be mapped to a
single Paddle.
If you TAP a Paddle while NO controller buttons are held, it will clear the
Paddle of any current mapping.
To exit Mapping Mode, TAP either one of the Mapping Mode Buttons.
NOTE: STRIKEPACK HORIZON TM can store different Paddle maps between
Tournament, and GAMEPACK profiles. Paddle mapping can also be accessed on the
app.
UPDATER MODE
If you want to be able to update the STRIKEPACK HORIZON TM without having to remove it from your controller each time, use the following method: HOLD Paddles 1 & 3 together while you are connecting the cable of the STRIKEPACKTM to the USB port of your Windows 10 or higher PC. The STRIKEPACKTM should be successfully detected in the Universal Updater Tool.
HARD FACTORY RESET
If you need to return the STRIKEPACK HORIZON TM to the factory settings for
its current firmware, this can easily be performed. This can quite often
resolve seemingly unresolvable issues, especially after a firmware update or
when you have made several changes and updates to the device over time.
HOLD BOTH Mapping Mode Buttons together while you are connecting the cable of
the STRIKEPACKTM to the USB port of your Xbox® console or PC. Keep the Mapping
Mode Buttons HELD until you see HOT PINK Gear Head Eyes and RGB LED indicators
to confirm the reset has been completed.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or elevision reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>