ECHELON X6 True Wireless Earbuds User Guide
- June 5, 2024
- Echelon
Table of Contents
User Guide
TRULY WIRELESS EARBUDS
Inside the Box:
1. Echelon X6 Wireless Earbud | ×2PCS |
---|---|
2. On-the-go charging Case | ×1PCS |
3. Type C charging Cable | ×1PCS |
4. Eartips(Size S/M/L) | ×3Pairs |
5. User Manual | ×1PCS |
Specification:
Bluetooth Version: BT5.2+EDR
Earbud charging time:1.5 hours
Charging case Charging time:2.5 hours Earbud Battery:3.7V/50mAh
Charging Case Battery:3.7V/650mAh
Safety precautions:
The Earbuds are of excellent quality, in order to extend the earbuds, please make sure of the following instruction
- Please keep away the device away from extreme heat, and humidity in the corrosive environment.
- Please don’t over-charing the earbuds or charging case for a long time, as they will decrease the battery service life.
- Use a dry cloth to wipe the earbud charging part after using the earbuds.
WEARING
Wearing: Choose the silicone ear tips that are most suitable for your ears.
ON/OFF
ON/OFF : When the charging case battery level is sufficient,open the
charging case and remove the earbuds from the case,the earbuds will
automatically turn on; put them into the case and close the cover, and the
earbuds will automatically turn off.
Note: You can also turn on or turn off the earbuds manually,That is,
press and hold the MFB on L/R for 2 seconds to turn on the earbuds; press and
hold the MFB on L/R for 5 seconds to turn off the earbuds when they are in the
non-playing state.
PAIRING
Pairing: When the charging case battery level is sufficient, open the charging case and remove the earbuds from the case,the earbuds will automatically turn on and then enter Bluetooth pairing mode, At this time, the indicator of the main earbud will flash red and white light alternately and the indicator of the secondary earbud will flash white light once every 3 seconds, Then please turn on the Bluetooth function of your phone, search“Echelon X6” and click to connect.
CHARGING
Charging: Before the first time use, please make sure the charging case and the earbuds are fully charged.
CONTROL
Play/pause : Double-tap the MFB on L/R.
Previous song: Press and hold the MFB on L.
Note : In mono mode, pressing and holding the MFB on L will trigger the
next song function.
Next song: Press and hold the MFB on R.
Volume down: Tap the MFB on L to decrease the volume continuously.
Note: In mono mode, volume adjustment is unavailable.
Volume up : Tap the MFB on R to increase the volume continuously.
Note: In mono mode, volume adjustment is unavailable.
Answer/hang up a call: Double-tap the MFB on L/R.
Reject a call : Press and hold the MFB on L/R for 2 seconds.
Activate voice assistant: Triple-tap the MFB on L/R.
Note: In mono mode, tapping the MFB on L/R three times will turn on the
voice assistant.
RESET
Reset:
1)Delete the pairing name “Echelon X6” on your mobile phone and turn off the
Bluetooth function.
2)Turn off the left and right earbuds, press, and hold the MFB on L and R at
the same time for 10 seconds. Release the MFB until the indicators of both
earbuds flash red and white alternately 3 times and then go out.
3)Put the earbuds back into the charging case and close the cover, Leave it
for 5 seconds.
4)Open the charging case and double-tap the MFB on L /R select the pairing
name on your phone, The reset is successful.
WARNING
Do not listen to high volume levels for long periods.
DESCRIPTIONS OF LED INDICATORS
B LED:
The middle number represents the amount of power in the charging case
The left and right power lights represent the charging status of the earbuds
LED Indicator & Voice Prompt
Earbuds are being charged: B Power indicator running
Note: when the case is over, A LED blinking white light
Earbuds are fully charged : B Power indicator full
Charging case in low battery: Blinking red light of A LED
Charging case is fully charged: Solid red lights of A LED
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>