Sunnydaze DECOR DL-875 Curved Steel Hammock Chair Stand Installation Guide
- August 14, 2024
- Sunnydaze DECOR
Table of Contents
Sunnydaze DECOR DL-875 Curved Steel Hammock Chair Stand
Product Specifications
- Product Name : Curved Steel Hammock Chair Stand
- Model Number : DL-875
Product Usage Instructions
Assembly:
Before using the product, carefully review all assembly steps, care
instructions, and safety information provided in the manual.
- Align Legs (B) with Base (A) and loosely secure using four M8x60mm Bolts (F), Washers (H), and Locknuts (I).
- Align Center Poles (C) with the legs and loosely secure using four M8x60mm Bolts (F), Washers (H), and Locknuts (I).
- Align the Top Poles (D) with the center poles and loosely secure them using four M8x60mm Bolts (F), Washers (H), and Locknuts (I).
- Secure the upper-most hole in the top poles using one M8x25mm Bolt (G), Washer (H), and Locknut (I).
- Install Anchor Shackle (J) into the bottom hole on the top poles.
- Finish tightening all hardware.
Hanging Your Hammock Chair
Important guidelines for hanging your hammock chair:
- This stand accommodates many hanging chair styles but is not suitable for hand-woven or rope-style chairs.
- Ensure the seat height of the chair allows for safe entry and exit.
- Enter and exit the chair slowly to prevent tipping over.
- Avoid swinging or excessive movements that may cause the stand to tip over.
- You can gently sway in the chair as long as both feet are in contact with the ground.
Purchase Date: / /
Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the
quality of the items we sell. Replacement parts or products will be sent at
our discretion within the 1-year warranty period. Proof of purchase, with the
date of purchase as well as photos of the merchandise defect, must be
provided. Photos are used to determine the cause of defects and for future
quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments, or concerns, feel free to contact us by
phone at 833-982-1977, by email: at
customerservice@sunnydazedecor.com,
or via our Contact Us page at https://tiny.cc/SunnydazeContact
Review all assembly and care information before using this product. Save this
manual for future reference.
Assemble components on a soft, clean surface to avoid damaging the finish.
WARNING: Failure to read and follow instructions and safety warnings could result in serious injury or damage to property.
Inspect packaging to ensure all parts are accounted for before disposing of
packing materials.
Save the packing slip.
Parts
Included Tools
WARNING: CHOKING HAZARD — This item contains small parts that can be
swallowed. Keep children and pets away during assembly.
CAUTION: This unit is not designed for use as a swing. Bouncing,
swinging, or any other significant movement while in use may cause the stand
to tip, which may lead to serious injury.
This stand must be used on a solid, stable, level surface. Ensure all hardware
is securely tightened before every use.
ASSEMBLY
- Carefully read all assembly steps, care instructions,\ and safety information before using this product.
- When choosing a location for your hammock stand, select a smooth, level surface.
- Do not install on dangerous terrain or objects such as slopes, rocks, or bodies of water.
IMPORTANT: Locknuts must be installed with the nylon insert facing outward. Hand-tighten the nut until you feel resistance, which is caused by the nylon insert. Tools are required to fully tighten locknuts, failure to properly tighten the locknuts may result in product malfunction or personal injury.
TIP : Always fully insert the hex key into the designated notch of the bolt.
- Align Legs (B) with Base (A) and loosely secure using four M8x60mm Bolts (F), Washers (H), and Locknuts (I).
- Align Center Poles (C) with the legs and loosely secure using four M8x60mm Bolts (F), Washers (H), and Locknuts (I).
- Align the Top Poles (D) with the center poles and loosely secure them using four M8x60mm Bolts (F), Washers (H), and Locknuts (I).
- Secure the upper-most hole in the top poles using one M8x25mm Bolt (G), Washer (H), and Locknut (I).
- Install Anchor Shackle (J) into the bottom hole on the top poles, as shown.
- Finish tightening all hardware.
HANGING YOUR HAMMOCK
HANGING YOUR HAMMOCK CHAIR (hammock not included)
IMPORTANT: This hammock stand accommodates many (but not all) hanging
chair styles. This stand is not suited for most hand-woven or rope-style
hanging chairs.
The seat height of the hanging hammock chair should be at a height where the
user can enter and exit the hammock chair safely.
Always enter and exit hammocks slowly; moving too quickly can cause the hammock chair and/or stand to tip over. This stand is not designed for swinging or excessive movements, as doing so may cause the stand to tip over. It is okay to be very gently in your hanging hammock chair as long as both feet remain firmly in contact with the ground.
ADJUSTING HAMMOCK HEIGHT (hammock chair and hanging hardware not included)
- Additional hanging hardware (not included) may be required to hang your hammock chair.
- If your chair is too high, you may need to purchase a Grade 30 Galvanized Chain (not included) to achieve a safe hanging height.
- If a chain is used, the number of chain links between the anchor shackles will determine how high or low your hammock chair hangs.
- More links = closer to the ground
- Fewer links = higher off the ground
Adjust height as needed; take into account the type of chair and the users’ height and weight. stand and chair will be lowered to the ground after weight is added. Note, it is normal for the stand downward after weight is added.
BEFORE USE
- Ensure all hardware is securely fastened.
- Ensure the hanging hammock chair stands on a firm, flat, and level surface.
- Carefully read all use, care, and safety information to ensure the stand is used safely.
- Always enter and exit the hammock slowly.
- Do not swing in your hammock chair when used with this stand!
GENERAL USE & CARE
-
WARNING: D o not use if parts are missing, worn, or damaged.
-
WARNING: Do not allow children to use this product without constant adult supervision.
-
WARNING: Never leave a hammock hanging on this stand while not in use.
-
WARNING: Always keep weight centered over the base when using this product.
-
SAFE USE : Follow all safety statements and warnings. Always move slowly when getting in and out of any hammock. Do not use this chair stand for swinging. Swinging, bouncing, jumping, and other excessive movements may cause the stand to tip over or break, which may result in serious injury or property damage.
Always remove your hammock from the stand while not in use. -
CHILDREN: This stand is only to be used by adults and person(s) with developed motor skills who also understand the potential dangers if hammocks and hammock stands are misused.
Supervise children at all times. Never allow small or young children to enter or exit a hanging hammock chair without adult assistance. Never allow or encourage children to sleep or play in a hammock. Always teach and practice safe hammock use, with and without a hammock stand. -
INSPECTION: Frequently check the stand to confirm all hardware is securely fastened. Do not use the stand if parts are missing, broken, damaged, or worn. Don’t forget, it is also important to inspect your hammock chair (not included) before every use.
-
COVER AND STORE: Protect your investment by covering or storing this stand when not in use. Avoid long-term exposure to precipitation and high-moisture areas. Covering the stand will protect it from damage caused by water and sunlight. Store in a cool, dry location.
-
CLEANING: Wipe surfaces with a soft cloth and warm water. Dry the stand after cleaning to prevent rust.
-
SCRATCHES: The powder coating on the stand is tough and durable, but even under normal use, some scratching is inevitable. To avoid excessive rust, wipe scratched areas as needed to remove moisture.
-
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS CAUSED BY THE APPLICATION OF CHEMICAL TREATMENTS, PROTECTIVE COATINGS, TOUCH-UP PAINT, OR CLEANING PRODUCTS.
SAFETY STATEMENTS
SAFETY STATEMENTS & WARNINGS
- Do not exceed the weight capacity.
- Do not swing, bounce, jump, twist, or spin in any hanging chair when using this chair stand. This stand is designed for sitting calmly in a hammock chair. Chair not included.
- When in use, the hanging chair (not included) should remain inside the base area at all times. A diagram of the base area is shown on the right.
- Always inspect the stand and hardware for weakness and damage before each use.
- Do not stand or climb on any part of this unit.
- Do not allow children to use this product without adult supervision. Never leave children unattended.
Any modification to the product or failure to follow recommended care will void the product warranty.
If you experience issues with assembly or the product was damaged during
shipping, please contact our customer service team through one of the methods
mentioned at the top of page 1.
Please have the item number and order information ready to expedite response
time.
WARNING: Manufacturer and seller expressly disclaim any liability from personal injury, property damage, or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.
SCAN FOR HAMMOCK SAFETY TIPS
https://tiny.cc/hammock-safety
FAQ
- Q: Can this hammock chair stand to be used for swinging?
- A: No, this stand is not designed for swinging. Bouncing, swinging, or any significant movement may cause tipping, leading to serious injury.
- Q: How should I ensure the locknuts are properly tightened?
- `A: Locknuts must be installed with the nylon insert facing outward. Hand-tighten until you feel resistance caused by the nylon insert. Use tools to fully tighten them to prevent malfunction or injury.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>