GIVING TREE 6636 One Piece Toilet Installation Guide
- August 19, 2024
- GIVING TREE
Table of Contents
- COMFORT IS A NATURAL GIFT
- TOOLS AND MATERIALS
- PRODUCT SIZE
- PARTS LIST
- REMOVE OLD TOILET
- INSTALLATION STEPS
- ADJUSTMENT & MAINTENANCE (DUAL FLUSH VALVE)
- TROUBLESHOOTING
- FILL VALVE INSTALLATION
- MAINTENANCE & CARE
- ONE-YEAR LIMITED WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Installation Instructions One Piece Toilet
Model: 6636
COMFORT IS A NATURAL GIFT
READ ALL INSTRUCTIONS BEFORE UNPACKING THE PRODUCT
Two people are required to lift and assist during the entire installation of
this product.
- Installation of this product by an inexperienced installer may result in personal injury!
- We reserve the right to change, update, modify, or redesign this manual/product or its policies without prior notice!
- We shall not be liable for any injuries or property damage in connection with the installation or use of this product!
- We are not responsible for local code compliance for this product. Building and plumbing codes may vary from state to state in
- ccordance with your location. We are not responsible for providing any compliance certifications
- Under no circumstances shall we be liable for any incidental damages sustained in connection with this product.
- Neither manufacturer, distributor, nor retailer is responsible for water damage or oodingcaused by the use of this product.
- Under no circumstances shall we be liable for any fees, costs of installation/ reinstallation/removal, subsequent damage, or transportation in case of product defect.
TOOLS AND MATERIALS
Before beginning the installation, please ensure you have the following tools ready. If you do not have all the necessary tools, avoid opening the packaging to prevent potential damage from multiple installation attempts. We recommend hiring a professional plumber to install this product.
PRODUCT SIZE
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE
WITH CARE!
NOTE: Pictures may not exactly define contour of china and components.
PARTS LIST
REMOVE OLD TOILET
IMPORTANT!
Shut off main water supply prior to installation!
- Shut off water supply line. If you do not have shut-off valve near the toilet shut off main water supply line.
- Flush the old toilet and make sure that tank is empty.
- Disconnect and remove water supply line connected to the toilet’s tank.
- Remove old toilet, bolts, nuts from the closet flange.
- Clean closet flange area from old wax ring and putty sealant using putty knife from the base area.
- Clean any remaining debris and wipe any water at the installation area
- Temporarily plug flange on a floor with a flange plug or towel to prevent gasses from escaping.
INSTALLATION STEPS
-
INSTALL CLOSET BOLTS AND MOUNTING BRACKET
Install closet bolts in the flange channel, turn 90°, and slide into place 6″ (152mm) apart and parallel to the wall. -
LEVEL POSITIONING
Use a pencil or tape to add two alignment lines to assist in positioning the toilet and aligning the mounting holes. Ensure these lines are parallel to the front and also parallel to the floor bolts and mounting bracket. -
INSTALL WAX SEAL
Invert toilet on floor (cushion to prevent damage), and install wax ring evenly around waste flange (horn), with tapered end of ring facing toilet. Apply a thin bead of sealant around toilet base. -
INSTALL TOILET BODY
With two people lifting the toilet, align the bottom openings with the mounting hardware on the flange.
Then, gently lower it, ensuring the openings fit over the mounting bracket. -
SECURE THE TOILET
Screw in the side holes, securing the toilet to the L-shaped bolts, and cover with decorative caps Position toilet squarely to wall and, with a rocking motion, press bowl down fully on wax ring and flange.
Alternately tighten nuts until toilet is firmly seated on floor. -
CHECK ALL CONNECTIONS FOR LEAKS.
-
APPLY SEALANT TO SECURE
Check that there are no leaks and that the toilet is securely fastened without any wobbling. Then, apply a bead of sealant around the base of the toilet to reinforce its stability and prevent potential leaks in the future. -
INSTALLATION IS COMPLETE
ADJUSTMENT & MAINTENANCE (DUAL FLUSH VALVE)
Important Note: Flush GPF amount is factory set. (1.6GPF/1.1GPF)
No additional adjustment is required. This page is for reference only.
All adjustments are already made by manufacturer.
Full flush and half Flush range will decline when the button is moved upward
from the bottom.
-
Full flush requires the adjustment of 2 valves, the “FULL” red valve and the “FULL” green valve.
Adjust upwards to reduce the water flow and downwards to increase the water flow.2 valves must be synchronized. -
Half flush requires the adjustment of 1 valve, the “HALF” green valve.
TROUBLESHOOTING
If the rod is too short, please readjust it (outward rotation).
If the rod is too long, please cut off the extra length and re-adjust it.
FILL VALVE INSTALLATION
Installation
Water level adjustment – 1
MAINTENANCE & CARE
Use soft sponges or soft-cloths to clean the surface. Always rinse thoroughly
any cleaning solutionsimmediately after cleaning. Do not let any chemical
remain on the surface for extended periods of time.
IMPORTANT!
DO NOT USE: Abrasive cleaners such as acid, ammonia, bleach, and similar
solutions.
Use of such solutions may cause corrosion, finish peeling, or dulling of the
surface.
DO NOT USE: Abrasive sponges or cloth. Never use steel, wool, or wired brushes
that will permanently scratch the surface.
FILL/FLUSH VALVES MAINTENANCE & CARE
Do not pour any amounts of chlorine or other chemicals into the tank.
Use of chemical products will result in damage to the fill valve and flush
valve components and may cause ooding and property damage.
Note: fill and ush valves are maintenance free. No maintenance is
required.
Retain these installation instructions for future reference!
ONE-YEAR LIMITED WARRANTY
GIVING TREE® products are made of high-quality materials and exquisite
craftsmanship to provide customers with beautiful, durable, and long-lasting
products.
GIVING TREE® provides beautiful, durable, and long-lasting products to
customers. If any defects in materials or craftsmanship are found in the
product within the first year after installation under normal use, GIVING
TREE® will provide free replacement parts or, at its discretion, replace any
product or part of the product that is considered defective under normal use.
SCRATCHES ARE NOT COVERED UNDER WARRANTY. Any product or part considered
defective under normal installation, use, service, or maintenance is
applicable to this warranty. This warranty is only valid for the original
purchaser. Proof of purchase is required for claims.
Contact our Customer Care Center for Help:
USA: +1 347-368-7521 GMT-8/ 9:30-18:30/
Mon-Fri)
www.givingtreehome.com
rsvp@givingtreehome.com