BN Products BNCE-20-24V 24 Volt Cordless Cutting Edge Threaded Rod and Rebar Cutting Saw User Guide

: June 9, 2024
: BN Products

Table of Contents

BNCE-20-24V 24 Volt Cordless Cutting Edge Threaded Rod and Rebar Cutting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BNCE-20-24V 24 Volt Cordless Cutting Edge
Threaded Rod and Rebar Cutting Saw
User Guide

Cutting Edge Saw™
BNCE-20-24V Parts Guide
BN Products USA™ – Customer Service
800-992-3833

BNCE-20-24V 24 Volt Cordless Cutting Edge Threaded Rod and Rebar Cutting

Saw

The BNCE 20-24V Cutting Edge Saw™ is a 24v battery-operated multi-purpose cutting tool. The saw can easily cut #6 (3/4″) rebar, threaded rod, chain, EMT conduit, copper pipe, steel rods and tubing, and much more. This tool features a three position handle for reach and stability. The capacity of the opening is 3/4″ (20 mm), with a shrouded blade for user-safety. This kit includes two (2) Lithium-Ion batteries and a battery charger.

Parts Listing for BNCE-20-24V Cutting Edge Saw™

Parts Listing for BNCE-20-24V Cutting Edge Saw™

#| Part Number| Description| Qty| #| Part Number| | Description| Qty
1| BNCEP1-71| HEXAGON SOCKET SCREW (M5X14)| 4| 30| BNCEP24V-30| | ALUMINUM GEAR BOX HOUSING| 1
2| BNCEP1-72| BLADE COVER FOR BNCE-20-24V| 1| 31| BNCEP-31| | STEEL RING (6mm)| 1
3| BNCEP1-73| HEXAGON SOCKET SCREW (M5X8)| 4| 32| BNCEP-32| | SPRING FOR LOCK BUTTON| 1
4| RB-BNCE-20| BLADE, REPLACEMENT (BNCE-20-24v)| 1| 33| BNCEP-33| | BLADE LOCKING BUTTON| 1
5| BNCEP1-75| BLADE FLANGE AND SPINDLE ASSEMBLY| 1| 34| BNCEP24V-34| | SCREW TAPPING PAN HEAD T15 TOR| 4
6| BNCEP-19| PIN (A5X10)| 1| 35| BNCEP24V-35|

*BNCEP24V-30A

Rotor Assembly

| NUT| 1
7| BNCEP-07| HEX BOLT (M5X30)| 4| 36| BNCEP24V-36| BEVEL PINION| 1
8| BNCEP-08| SPRING WASHER| 5| 37| BNCEP24V-37| BALL BEARING 608-2RS| 1
9| BNCEP-09| PLAIN WASHER (5 mm)| 4| 38| BNCEP24V-38| DIAPHRAGM| 1
10| BNCEP-20| HEX BOLT (M5X15)| 1| 40| BNCEP24V-40| BALL BEARING 696-2RS| 1
11| BNCEP-66| PLATE WASHER (5mm)| 1| 39| BNCEP24V-39| Rotor| 1
12| BNCEP-18| MOVEABLE CUTTING GUIDE BLOCK (20)| 1| 41| BNCEP24V-41| | STATOR| 1
13| BNCEP-17| FIXED CUTTING GUIDE BLOCK (20)| 1| 42| BNCEP24V-42| *BNCEP24V-42 Power

Switch Assembly

| POWER SWITCH ASSEMBLY| 1
14| BNCEP-21| LEFT/ RIGHT RUBBER PLATE (20)| 2| 42-2| BNCEP24V-42-2| ON/OFF POWER SWITCH| 1
15| BNCEP-22| PLAIN WASHER (4mm)| 2| 43| BNCEP-67| | 3 – POSITION SIDE HANDLE| 1
16| BNCEP-23| RETAINER WASHER (4mm)| 2| 44**| BNCEP24V-44| *BNCEP24V-44A Button

Assembly

| SWITCH BUTTON| 1
17| BNCEP-24| HEX SOCKET CAP HEAD SCREW M4X15| 2| 45| BNCEP24V-45| | POLE SWITCH| 1
18| BNCEP-78| FLAT KEY – 5X5X14| 1| 46| BNCEP24V-46| *BNCEP24V-46A Housing Assembly| RIGHT HOUSING| 1
19| BNCEP-12| GASKET SEAL| 1| 49| BNCEP24V-49| | LEFT HOUSING| 1
20| BNCEP-25| BALL BEARING (6002-2RS)| 1| 50*| BNCEP24V-50| BNCEP24V-47A Dust Protection Assembly| DUST PROTECTION-LEFT| 1
21| BNCEP-26| SPACER| 1| 47| BNCEP24V-47| | DUST PROTECTION-RIGHT| 1
22| BNCEP30-25| BIG GEAR| 1| 48| BNCEP24V-48| | SCREW TAPPING PAN HEAD T10 TOR| 6
23| BNCEP-28| RETAINING RING| 1| 51| BNCE-24VLI| | RECHARGEABLE BATTERY 24V| 2
24| BNCEP24V-24| BALL BEARING (608-2Z)| 1| 52| BNCE- 24VCHGR| | CHARGER, BNCE-24V CORDLESS| 1
25| BNCEP1-77| ALUMINUM HOUSING (BNCE-20-24V)| 1| 53| BNCEP30-21| | BEARING PLATE| 1
26| BNCEP24V-26| BALL BEARING (628-2Z)| 1| 54| BNCEP30-22**| | CROSS RECESSED COUNTERSUNK HEAD

SCREW M4 x 10

*Replacement Assemblies defined on Parts List are sold as a single unit
**Sub-assembly part also available as an individual part
BN Products USA™ – Customer Service
800-992-3833