Sung N Play Tower 6 in 1 Kids Slide and Swing Set User Manual

October 30, 2023
Sung N Play

Snug-N-Play-LOGO

Tower 6 in 1 Kids Slide and Swing Set

Snug-N-Play-Tower-6-in-1-Kids-Slide-and-Swing-PRODUCT-
IMAGE

Product Information: Slide & Swing Set

The Slide & Swing Set is a fun outdoor playset that includes a slide, swing, basketball ring, and ladder. It comes with all the necessary parts and hardware for assembly, including side panels, a slide extension, handrails, swing base, swing bar, swing arm, swing seat, swing backrest, seat armrest, nuts, screws, clasp, plug, and screwdriver. The set can be filled with water or sand for added stability and balance.

Product Usage Instructions

  1. Adult assembly is required. Please do not return the product to the store for any issues related to assembly or missing/damaged parts. Contact the seller for assistance.
  2. Start the assembly by connecting the slide and slide extension and attaching the handrails on each side using 3pcs of Screw B.
  3. Attach the Side Panel to the Slide using 1pc Nut D.
  4. Slide the Ladder Steps into Side Panel and secure them with 2pcs Nut A.
  5. Attach the second Side Panel to the slide using 1pc Nut D and 2pcs Nut A. Cover the hole with Plug J after filling it with water or sand for added balance.
  6. Slide the Swing Bar through the Side Panel and secure it with 1pc Screw I, Part G, and Nut A.
  7. Connect the Swing Arm, Seat, Backrest, and Armrest together using 8pcs Screw C and 1pc Nut H.
  8. Slide the Swing Set through the Swing Bar and insert 4pcs Clasps into the holes on the bar to secure the swing in place.
  9. Attach the 3rd Side Panel and secure the bottom with 2pcs Nut A and the top hole with 1pc Nut A, Screw I, and G.
  10. Attach the Basketball Net to the Basketball Ring and install the Ring on the Side Wall using 1pc Nut A.

Note: Please read and save the instruction manual for future use. Follow all safety and warning instructions mentioned in the manual.

SAFETY & WARNINGS

ADULT ASSEMBLY REQUIRED.

  • Keep these instructions for future reference.
  • This product is intended for indoor, outdoor, family, domestic use only.
  • Place this product on level ground and at least 6.6′ away from a fence, building, overhead branches, laundry lines or electrical wires. This product should be placed away from furniture that could cause injury if a fall occurs.
  • Ensure the installation area is ventilated.
  • Do not use the product if it is damaged or defective. If it is damaged or defective, please contact a qualified technician.
  • Check that all parts are assembled well and are stable before use. Defective parts must be changed immediately as they can impair the function and the safety of the product.
  • When temperatures fall below freezing (0˚C/32˚F), outdoor use of this product is not recommended. In extreme cold, plastic materials lose resilience and may become brittle and crack with impact. Store product in a warmer, protected place.
  • Keep away from fire or any source of ignition.
  • Packing materials are not toys, keep them away from children.
  • Instruct children on proper use of this product: only after properly assembled and installed, and not in a manner other than intended.
  • Dress children appropriately: do not allow children to wear loose-fitting clothing including ponchos, scarves and garments with drawstrings. Well-fitting shoes must be worn at all times.
  • Avoid placing equipment in direct sunlight as hot surfaces could cause serious burns.
  • Provide adult supervision at all times.

PLEASE DO NOT RETURN TO STORE

Please do not return this product to the retailer!!We are able to assist you in ANY way
If you find that you have any trouble with assembly or missing or damaged parts please contact the seller.

PART LIST

Snug-N-Play-Tower-6-in-1-Kids-Slide-and-Swing-01

ASSEMBLY

Snug-N-Play-Tower-6-in-1-Kids-Slide-and-Swing-02 Step1
Connect the Slide and Slide Extension, then attach the handrails, secure with 3pcs Screw B on each side. Snug-N-Play-Tower-6-in-1-Kids-Slide-and-
Swing-03

Step2
Attach the Side Panel to the Slide, secure with 1pc Nut D. Snug-N-Play-
Tower-6-in-1-Kids-Slide-and-Swing-04

Step3
Slide the Ladder Steps into Side Panel, and secure with 2pcs Nut A. Snug-N
-Play-Tower-6-in-1-Kids-Slide-and-Swing-05

Step4
Attach the second Side Panel to the slide, secure with 1pc Nut D, and 2pcs Nut A.

Snug-N-Play-Tower-6-in-1-Kids-Slide-and-Swing-06

Step5
Connect the Swing Base to the Side Panel, secure with 2pcs Nut A.
You can fill the base with water or sand for added balance, and cover the hole with Plug J.

Snug-N-Play-Tower-6-in-1-Kids-Slide-and-Swing-07

Step6
Slide the Swing Bar through the Side Panel, secure with 1pc Screw I, Part G and Nut A as shown above.

Snug-N-Play-Tower-6-in-1-Kids-Slide-and-Swing-08

Step7
Connect the Swing Arm, Seat, Backrest and Armrest together, secure with 8pcs Screw C and 1pc Nut H.

Snug-N-Play-Tower-6-in-1-Kids-Slide-and-Swing-09

Step8
Slide the Swing Set through the Swing Bar, insert 4pcs Clasps into the holes on bar to secure the swing in place.

Snug-N-Play-Tower-6-in-1-Kids-Slide-and-Swing-10

Step9
Attach the 3rd Side Panel, secure the bottom with 2pcs Nut A, and the top hole with 1pc Nut A, Screw I and G.

Snug-N-Play-Tower-6-in-1-Kids-Slide-and-Swing-11

Step10
Attach the Basketball Net to the Basketball Ring, and install the Ring on the Side Wall, secure with 1pc Nut A.

GENERAL SAFETY INSTRUCTIONS
This product is intended for indoor, outdoor, home, domestic use only. It is not suitable for commercial or medical use.
The assembly of the product must be done carefully and by an able-bodied adult. If in any doubt, ask a technically qualified person.
Do not use the product if it is damaged or defective. If it is damaged or defective, please contact a qualified technician.
Check the product before each use. Defective parts must be changed immediately as they can impair the function and the safety of the product.
Use the product only on even and non-slip surfaces. Keep sufficient space around for safety.
Beware that when using tools or doing technical work, there is always a risk of injuries. Assemble the product with care.
After installing the product according to the instruction manual, ensure all screws, bolts and nuts are correctly installed and tightened and that all joints are secure.
Do not make alterations to the product. Only use original spare parts. Only qualified technicians should carry out repairs – improper repairs can lead to danger for the user. Use this product only as described in this manual.

IMPORTANT
The owner’s manual contains safety, assembly, use and maintenance instructions. The product must be assembled by an adult who has read and understood these instructions. Keep the packaging away from children and dispose of all packaging before use.

OPERATION INSTRUCTIONS

Provide adult supervision at all times.
The disassembled product contains small parts which pose a choking hazard to children under 3. Dress children appropriately, including wearing well-fitting shoes that fully protect feet. Instruct children:

  • To sit in the center of the swings with their full weight on the seats,
  • To avoid swinging empty seats,
  • To slide feet first; one child down slide at a time,
  • To remove articles, before playing on equipment, that create hazards when they get tangled and caught.
  • Not to walk close to, in front of, behind, or between moving items,
  • Not to get off equipment while it is in motion.

Never allow children to use the equipment in a manner other than intended. Do not swing while standing or slide down head first.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals