MEMPHIS SBT2 Rocker Switch Bluetooth Controllers User Manual
- October 27, 2023
- MEMPHIS
Table of Contents
MEMPHIS SBT2 Rocker Switch Bluetooth Controllers
Ready to turn it up? Read this first!
Memphis Audio built a 50 year legacy in the audio industry by engineering the
highest quality products to produce the best possible listening experience for
our fans and loyal supporters. To fully appreciate our products we recommend
taking the time to read and follow the instructions in this manual. As always,
we recommend all the installations and services to be performed by an
authorized Memphis Audio dealer.
For optimal performance, Memphis recommends using only Memphis Connection
accessories. Outfitting your system with properly sized Memphis Connection wire
and accessories will dramatically boost your listening experience and increase
the durability of your Memphis Audio products.
Memphis Audio’s SBT2 Bluetooth streaming accessories allow you to wirelessly
connect to any Bluetooth device providing a complete Bluetooth solution
wherever you need it. To keep this piece as bulletproof as possible, we sealed
the unit making it waterproof in the event of submersion and resistant to the
elements.
Combine with our Memphis Marine Grade Speakers and ultra-compact amplifiers for
the perfect rugged go-anywhere audio solution!
Features
- Rotary knob for easy and intuitive volume control
- RGB LED knob indicates source selection
- Inputs include Bluetooth, AUX, USB flash drive play
- RCA output & 3.5mm AUX input
- USB charging compatibility
- Water and element resistant
- 2.6V output
- Designed to fit standard Rocker/Carling Switch locations
Pairing Instructions
Before starting, confirm your Bluetooth device is capable of streaming A2DP
Bluetooth signals and that the Bluetooth is ENABLED on the device. Typically
that function is available by entering the settings menu, then finding the
‘Bluetooth” controls on your device.
Bluetooth functions are typically depicted by a Bluetooth symbol. Look for the
Bluetooth symbol on your device when attempting to enable Bluetooth
functionality.
Operation:
Long press and hold the power button for 2 seconds. The unit will turn on and
the buttons will illuminate blue. The BT LED will flash rapidly when the unit
is powered on. When the SBT2 is successfully paired, the BT indicator will
then be lit blue continuously and will no longer be flashing.
Make sure your phone is in ‘Pairing’ or ‘Discoverable’ mode. Within a few
seconds you should see
‘SBT2’ appear on your device’s Bluetooth menu. Selecting ‘SBT2’ will authorize
your device to connect with the SBT2.
Once the SBT2 is connected, be certain the volume on your phone is set at a
reasonably high level (at least 3/4 of max volume). Adjusting the volume of
the system can be done on the SBT2 once your device is paired.
Press and hold the power button for 2 seconds to turn off the unit.
Control Functions:
The controls will allow you to perform the following functions: track up,
track down, volume up, volume down, play/pause in Bluetooth/USB mode.
Changing Source:
After the power is on, short pressing the power button will change between the
sources: Bluetooth > Aux > USB. The related indicator will illuminate showing
which selection is active.
Identifying source modes:
- BLUE LED indicates Bluetooth source.
- GREEN LED indicates Aux source.
- PURPLE LED indicates USB source.
Button Functions
Bluetooth, Aux, and USB Charging Inputs
Warranty
Should your SBT2 require service, please consult with the dealer from which it
was purchased, or contact Memphis Audio customer service: 800-489-2300, or
send an email to
techsupport@memphiscaraudio.com. Do
not attempt to return your accessory directly to us without first calling for a
Return Authorization number. Units received without an accompanying Return
Authorization number will be returned unopened. Additionally, you must include
a copy of your purchase receipt from an authorized dealer for consideration of
in-warranty service; otherwise, repair charges will apply. Units received
without a receipt will be held for 30 days allowing us time to contact you and
obtain a copy of the receipt.
Legal Disclaimer
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment must be installed and operated in
accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least
20cm from all persons.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
800.489.2300
www.memphiscaraudio.com 122 Gayoso Ave.
Memphis,TN, USA