earfun TW205 True Wireless Earbuds User Manual

**earfun TW205 True Wireless Earbuds User Manual

**

EarFun Audio App

Download the EarFun Audio app for an enhanced experience.

• No Forced Registration. Easy to Use.
• Multi-Band Equalizer, Multipoint Devices Management.
• Customizable Touch Controls, Game Mode.
• Firmware Update, Find Headphones, and More.

Please update your earbuds firmware to the latest version via the EarFun Audio App for the best user experience. If earbuds can’t connect to the app, reinstall or update the app in the app store.

How to Fit

1. Choose the best-sized ear tip

2. Insert

3. Rotate

Note:

1. Please choose the suitable ear tip for the best sound and secure fit.
2. Select the left or right earbud and insert to the corresponding ear.
3. Rotate the earbud back and forth for the ear tip to create a comfortable seal.

Pairing Your Earbuds

First-time Pairing with Device

1. Remove the insulating film

2. Put back in and close the lid

3. Open to take out both earbuds

4. Activate Bluetooth and connect

Connect to a New Device

Option A

1. Unpair from the old device

2. Search on the new device and connect

Option B

1. Power on and put on, triple tap on BOTH earbuds to pair

2. Search on the new device and connect

Reset and Reconnecting

1. Power on and put on, press BOTH earbuds for 8s
   *Until hearing the prompt tone “pairing

2. Delete the previous Bluetooth record

3. Reactivate Bluetooth to reconnect

Touch Controls

Playing music

Hands free conversation

Activate the voice assistant

Game Mode : Please enable in EarFun Audio app

Battery level

• Green 70% – 100%
• White 30% – 70%
• Orange 5% – 30%
• No LED Indicating <5% Please charge
• LEDs flashes lowly Charging
• Green Charging complete

Specifications

hours with the charging case
Dimensions| 61.8mm x 25.7mm x 46.9mm
Weight| 38g

Troubleshooting

Q: The earbuds are turning on, but fail to connect to my device?
A: To connect your earbuds to your device, please remove the insulating films on both earbudsand check that Bluetooth is enabled. If the earbuds still don’t connect, try resetting them or contact us for assistance.

Q: What to do if one earbud is silent or has low volume?
A: If the earbud’s LED is lit, carefully clean the dirt from the speak mesh using a toothpick or cotton swab dipped in alcohol. Try to reset the two earbuds and reconnect. If the issue persists, please contact us for assistance.

Q: What to do if the earbuds are uncomfortable to wear?
A: Select the appropriate size of eartips, then correctly wear the earbuds.

Q: What to do if the other person cannot hear clearly during a call?
A: Please adjust the position of the earbuds to ensure that the voice microphone is pointing towards the direction of the speaker’s voice. Ensure the Bluetooth device uses the earbud’s microphone for calls.

Q: What to do if the earbuds fail to connect to the app?
A: Ensure Bluetooth connection and Location permissions are enabled for the app. These permissions do not involve any privacy information. You can also download the latest version of the app or uninstall and reinstall it if needed.

Q: What to do if the audio quality does not meet your expectations?
A: We suggest personalizing your audio settings according to your preferences in the EarFun Audio app’s EQ settings.

Q: Why is the connection not stable and cuts out intermittently?
A: Please check for any objects obstructing the earbuds and the Bluetooth device, and avoid any potential radio or WiFi interference. While the earbuds have a maximum range of 49 feet (15m) without obstacles, the actual range may vary depending on usage the environment.

Q: Is the charging case waterproof?
A: No, the earbuds are sweat and waterproof, but the charging case is not.

Customer Service

For FAQS and more information:
Please send an email to: service@myearfun.com www.myearfun.com

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Compliance

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CAUTION

Risk of explosion if the battery is replaced by an incorrect type

Disposal of a battery into fire or a hot even, or mechanically crushing or cutting of a battery, that can result in an explosion;  Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;

A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

BLUETOOTH

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Earfun Technology (HK) Limited is under license.

Other trademarks and trade names are those of their respective owners.

EU Declaration of Conformity

Earfun Technology (HK) Limited hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and RoHS 2011/65/EU Directive. The declaration of conformity may be consulted in the support section of our Web site, accessible from www.myearfun.com

UK Declaration of Conformity

Hereby, [Earfun Technology (HK) Limited] declares that the radio equipment type [TW205] is in compliance with UK Radio Equipment Regulations (SI 2017/1206). The full text of the declaration of conformity is available at the following internet address: www.myearfun.com

ISED Compliance Statements

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

References

• EarFun Official Website | Better Sound. Better Life
• INNPRO Sp. z o.o. Files
• Index of /public/dokumenty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>