earfun Free Pro 2 ANC Wireless Earbuds User Manual
- June 3, 2024
- EarFun
Table of Contents
EarFun Free Pro 2
ANC Wireless Earbuds
User Manual
What’s in the Box
Product Diagram
- Touch control zone
- Microphone
- Earbuds LED indicator
- Charging contactor
- USB – c charging port
- Charging case
- Charging dock
- Charging case indicator
Charging
- Remove the insulating film on the charging case for the first time.
- Fully charge both the earbuds and the charging case before the first-time usage.
- Place earbuds back into the charging case and the earbuds will start charging .
- Open or close the charging case te activate the LED battery level indicator.
- Fully dry off the earbuds and the USB port before charging .
Connect USB-C cable for charging Wireless charging(not included)
Specifications
| Bluetooth version | V5.2 |
|---|---|
| Bluetooth frequency | 2.402GHz-2.48GHz |
| Bluetooth transmitted power | <7dBm |
| Bluetooth profile | A2DP, AVRCP, HFP, HSP |
| Maximum working range | 15m(without obstacle) |
| Battery capacity | 35mAh x 2(earbuds); 420mAh(charging case) |
| Charging time | ‘Thour(for earbuds ) ; 2 hours(for charging case via USB-C); |
3.5 hours(for charging case via wireless charger)
Play time| ANC OFF–Up t o 6 hours, Totally 30 hours with the charging case;
(varies by volume level and audio content) ANC ON-Upto4 hours, Totally 20
hours with the charging case;(varies by volume level and audio content)
Input| DC5V/1A
Dimentions| 6.6mm x 25mm x 28.5mm
Weight| 38g
How t o Fit
Note: If the earbuds are not worn correctly, they may affect the noise cancelling effect.
- Choose the ear tips and ear hooks that fit your ears the best. If you couldn’t use the ear hook, please choose the one without the wing.
- Identify the left and right earbuds .
- Insert the earbuds into the canal of your ears, the ear hook should also be inserted into the upper canal of your ears.
- Turn and find the most comfortable position .
Pairing Your Earbuds
- First-time Pairing with Device
Step 1: Open the chargi the ilie power on and enter ito pairing mode.
Step 2 : Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices .
Step 3 : Select “EarFun Free Pro 2” from the list of Bluetooth devices shawn (if a password is needed, type ‘0000’.
Notes:
• The earbuds will automatically connect with the device they were last paired with when the case is open.
• Each earbud could be used independently.
2.Connect to a New Device
Option A
Step 1: Unpair the earbuds from the Bluetooth-enabled device that’s connected. The earbuds will disconnect from the current device and enter into pairing mode for another pair.
Step 2: Search on the new device and connect .
Option B
Step 1: Place both earbuds b a c k into the charging case and ensure they are
being charged, keep the cover open, then press and hold the two earbuds for 3
seconds until the LED lights on both earbuds flash in blue rapidly, when the
earbuds will enter the pairing mode.
Step 2 : Search on the new device and connect.
Functions
Open the charging case, the earbuds will automatically power on.
Place the earbuds back into the charging case. Close the case and the earbuds
will automatically power off.
Note:
If the earbuds are not connected to any device, they will automatically
power off after 30 minutes to save the battery life.
Playing music
Play/Pause| 
Next track|
Volume up|
Volume down|
Hands free conversation
Answer/End a call|
Reject a call| 
Answer and transfer two calls| 
Activate the voice assistant
Voice assistant|
|
Noise cancelling control
Noise Cancelling/
Ambient sound/Normal| 
Game mode control
Game mode ON/OFF|
Notes:
- Turn on the game mode can drop latency to as low as 80ms and improve the playing game and video experience, but it will shorten the connection distance. We suggest you tum off the game mode when you use the earbuds for music.
- The normal mode provide latency about 200ms.
- Bluetooth technology can’t eliminate latency.
Earbuds LED Indicator
| Power on | Blue indicator flashes 1 second |
|---|---|
| Power off | White indicator flashes 1 second |
| Pairing mode | Indicator flashes blue |
| Successfully connected | Indicator goes out |
| Factory reset | Indicator flashes alternately i n blue and white |
Reset and Reconnecting
If you fail to build connection between two earbuds, or between earbuds and Bluetooth device, please try the following steps :
- Place both earbuds into the charging case.
- Keep the charging case open, then touch and hold the button on each earbud at the same time for at least 10s until they flash alternately in blue and white then arbuds have been reset successfully.
- Delete the old connection from the Bluetooth device and reconnect “EarFun Free Pro 2″.
Troubleshooting
Q: Can| use both earphones separately?
– A: Yes, each earbud could be used independently.
Q: The earphones are turning on, but it doesn’t connect to my device?
– A: To connect the earbuds to your device, please check if the Bluetooth of the device is on at first, then select ‘EarFun Free Pro 2′ on the Bluetooth list to get paired. If the earbuds still can’t connect to your device, please try to reset it, or contact our customer support.
Q: Why the connection is not stable and cuts out intermittently?
– A: Please make sure there are no objects between the earphones and your Bluetecth device, and make sure there i s no radio or WIFI interference nearby.
Q: What Is the range of Bluetooth earphones?
– A: Bluetooth earphones have maximum range of 49 feet (15m, no obstacle). However, the actual range will depend on usage and environment.
Q: Is there volume control on the earphones?
– A : Yes, touch L earbud o n c e decreases the volume and touch R once could Increase It.
Q: My earphones will not switch on.
– A: Please recharge it and make sure it has enough battery power. If it i s fully charged and still nothing happens or if you are not able to charge the unlit, please contact our customer support for warranty cover.
Q: Is the charging case waterproof?
– A: No, the earbuds are IPX5 sweat & waterproof, but the charging case is not waterproof.
Q: Will the earbuds shut off automatically?
– A: The earbuds will remain on as long as they are connected to a device. If no audio is in use, they will enter power-saving mode and wake up once audio is played. If the earbuds are not connected with any devices, they will automatically shut off In 30 minutes.
Customer Service
For FAQS and more information
Please Email to: service@myearfun.com
www.myearfun.com
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the users authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 5 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Conned the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
CAUTION
Risk of explosion if the battery is replaced by an incorrect type Disposal of
a battery into fire or a hot even, or mechanically crushing or cutting of a
battery, that can result in an explosion; Leaving a battery in an extremely
high temperature surrounding environment that can result in an explosion or
the leakage of flammable liquid or gas; A battery subjected to extremely low
air pressure that may result in an explosion or the leakage of flammable
liquid or gas.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
BLUETOOTH
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Earfun Technology (HK) Limited is under
license. Other trademarks and trade names are those of their respective
owners.
EU Declaration of Conformity
Earfun Technology (HK) Limited hereby declares that this equipment is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU and RoHS 2011/65/EU Directive. The declaration of
conformity may be consulted in the support section of our Web site, accessible
from www.myearfun.com
UK Declaration of Conformity
Hereby, [Earfun Technology (HK) Limited] declares that the radio equipment
type [TW303] is in compliance with UK Radio Equipment Regulations (SI
2017/1206). The full text of the declaration of conformity is available at the
following internet address: www.myearfun.com
MODEL: TW303
FCC ID: 2AVIT-TW303L
FCC ID: 2AVIT-TW303R