EarFun Free Pro 2 ANC Wireless Earbuds User Manual

EarFun Free Pro 2 ANC Wireless Earbuds User Manual

1. What’s in the Box

2. Product Diagram

1. Touch control zone
2. Microphone
3. Earbuds LED indicator
4. Charging contactor
5. USB-C charging port
6. Charging case
7. Charging dock
8. Charging case indicator

3. Charging

1. Remove the insulating film on the charging case for the first time.
2. Fully charge both the earbuds and the charging case before the firsMime usage.
3. Place earbuds back into the charging case and the earbuds will start charging.
4. Open or close the charging case to activate the LED battery level indicator.
5. Fully dry off the earbuds and the USB port before charging.

Connect USB-C cable for charging Wireless charging(not included)

4. Specifications

hours(for charging case via wireless charger)
Playtime| ANC OFF–Up to 6 hours, Totally 30 hours with the charging case; (varies by volume level and audio content)
ANC ON-Upto4 hours, Totally 20 hours with the charging case;(varies by volume level and audio content)
Input| DCSV / 1A
Dimentions| 66.6mm x 25mm x 28.5mm
Weight| 38g

5. HowtoFit

Note: If the earbuds are not worn correctly, they may affect the noise cancelling effect.

1. Choose the ear tips and ear hooks that fit your ears the best. If you couldn’t use the ear hook, please choose the one without the wing.
2. Identify the left and right earbuds.
3. Insert the earbuds into the canal of your ears, the ear hook should also be inserted into the upper canal of your ears.
4. Turn and find the most comfortable position

6. Pairing Your Earbuds

1. Firs Time Pairing with Device

Step 1: Open the charging case, the earbuds will automatically power on and enter into pairing mode.

Step 2: Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices.

Step 3: Select “Earfun Free Pro 2” forn the list of  Bluetooth devices shown. ( if password needed type ‘0000’.)

Notes:

• The earbuds will automatically connect with the device they were last paired with when the case is open.
• Each earbud could be used independently.

2. Connect to a New Device

Option A
Step 1: Unpair the earbuds from the Bluetooth-enabled device that’s connected. The earbuds
will disconnect from the current device and enter into pairing mode for another pair.

Step 2: Search on the new device and connect.

Option B

Step 1: Place both earbuds back into the charging case and ensure they are being charged, keep the cover open, then press and hold the two earbuds for 3 seconds until the LED lights on both earbuds flash in blue rapidly, when the earbuds will enter the pairing mode.

Step 2: Search on the new device and connect.

7. Functions

Power on/off

Open the charging case, the earbuds will automatically power on.
Place the earbuds back into the charging case. Close the case and the earbuds will automatically power off.

Note:
If the earbuds are not connected to any device, they will automatically power off after 30 minutes to save the battery life.

Playing music

Hands free conversation

Activate the voice assistant

Notes:

• Turn on the game mode can drop latency to as low as 80ms and improve the playing game and video experience, but it will shorten the connection distance. We suggest you turn off the game mode when you use the earbuds for music.
• The normal mode provide latency about 200ms.
• Bluetooth technology can’t eliminate latency.

8. Earbuds LED Indicator

9. Reset and Reconnecting

If you fail to build connection between two earbuds, or between earbuds and Bluetooth device, please try the following steps:

1. Place both earbuds into the charging case.
2. Keep the charging case open, then touch and hold the button on each earbud at the same time for at least 10s until they flash alternately in blue and white then earbuds have been reset successfully.
3. Delete the old connection from the Bluetooth device and reconnect “EarFun Free Pro 2 “.

10. Troubleshooting

Q: Can I use both earphones separately?

A: Yes, each earbud could be used independently.

Q: The earphones are tu ming on, but it doesn’t connect to my device?

A: To connect the earbuds to your device, please check if the Bluetooth of the device is on at first, then select ‘EarFun Free Pro 2’ on the Bluetooth list to get paired. If the earbuds still can’t connect to your device, please try to reset it, or contact our customer support.

Q: Why the connection is not stable and cuts out intermittently?

A: Please make sure there are no objects between the earphones and your Bluetooth device, and make sure there is no radio or WIFI interference nearby,

Q: What ls the range of Bluetooth earphones?

A: Bluetooth earphones have maximum range of 49 feet (15m, no obstacle). However, the actual range will depend on usage and environment

Q: Is there volume control on the earphones?

A: Yes, touch l ear bud once decreases the volume and touch R once could increase it.

Q: My earphones will not switch on.

A: Please recharge it and make sure it has enough battery power. If it is fully charged and still nothing happens or if you are not able to charge the unit, please contact our customer support for warranty cover.

Q: Is the charging case waterproof?

A: No, the earbuds are IPXS sweat & waterproof, but the charging case is not waterproof.

Q: Will the earbuds shut off automatically?

A: The earbuds will remain on as long as they are connected to a device. If no audio is in use, they will enter power-saving mode and wake up once audio is played. If the earbuds are not connected with any devices, they wlll automatically shut off In 30 minutes.

Customer Service

For FAQS and more information
Please Email to: service@myearfun.com
www.myearfun.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>