EarFun EFC100 Wireless Charging Pad User Manual
- June 3, 2024
- EarFun
Table of Contents
EarFun EFC100 Wireless Charging Pad User Manual
What’s in the Box
Overview
1. Wireless Charging Surface
2. Green LED indicator
3. USB-C Charging Port
Specifications
How to Use
Make sure your device supports the wireless charging and is Qi compatible Choosing the Best Adapter (not included and is sold separately)
- Make sure you adapter supports the Quick Charge 2.0/3.0 with output up to DC12V.
- The details of charging power and adapter output requirements are as below:
Note:
- If choose an adapter with the output lower than 5V/2A, it may cause slow charging or even unable to charge.
- The actual charging power depends on the wireless charging power supported by the smart phone you are using, the smart phone will automatically choose the power itself.
Connect and place the device to the center of the wireless charging pad
Note:
If the device is not placed in the center of the wireless charging pad, it
will cause slow charging or unable to charge.
LED Indicator
| Input Connected | Green indicator light ON for 3 seconds |
|---|---|
| Charging | Green indicator always ON |
| Remove the Device | Green indicator light OFF |
| Charging Error | Green indicator flash |
Input over current/over voltage/under voltage, over temperature and metal foreign objects on the pad will make the charging error.
Note
1.You cannot charge your device wirelessly in these reasons:
- Using a case with a magnetic/iron plate;
- Using a case with a pop socket;
- Using an ultra-thick(>6mm) protective phone case.
2. Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, which will make wireless charging fail or cause overheating.
3. Wireless charger make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
4.High temperatures will reduce charging speed and restrict power, which is a phenomenon common to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25°C/77 ° F.
5. Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther(further) it is placed from the center of the wireless charger, the slower the charging speed will be.
Important Safety Instructions
1. Avoid dropping.
2. Do not disassemble.
3. Do not expose to liquids.
4. For the safest and fastest charge, use original or certified cables.
5. This product is suitable for moderate climates only.
6. The maximum ambient temperature during use of this product must not exceed
104°F.
7. Open flame sources, such as candles, must not be placed on this product.
8. Only use a dry cloth or brush to clean this product.
Customer Service
For FAQS and more information
Please Email to: service@myearfun.com
www.myearfun.com
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator & your body.
EU Declaration of Conformity
Earfun Technology (HK) Limited hereby declares that this equipment is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU and Ro HS 2011/65/EU Directive. The declaration of
conformity may be consulted in the support section of our Web site, accessible
from www.myearfun.com
UK Declaration of Conformity
Hereby, [Earfun Technology (HK) Limited] declares that the radio equipment
type [EFC100] is in compliance with UK Radio Equipment Regulations (SI
2017/1206). The full text of the declaration of conformity is available at the
following internet address:
www.myearfun.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>