SUPLIK iPad Mini 5 Sparrow Style EVA Children’s Flat Anti Falling Protective Shell User Guide
- June 15, 2024
- SUPLIK
Table of Contents
SUPLIK iPad Mini 5 Sparrow Style EVA Children’s Flat Anti Falling
Protective Shell
How to install
How to install a screen protector?
Please NOTE if you ordered the case for iPad Mini 1/2/3/4/5, the package has 2
screen protectors: one is ONLY for iPad Mini 1/2/3, and the other one is ONLY
for iPad Mini 4/5, the screen protector is pasted on the model label.
NOTE: The screen protector contains 3 layers of films, the first and
third layers are blue mask films, and only the second (middle) clear one is an
actual screen protector.
- Step 1: Remove your iPad from any protective case, and turn off the device.
- Step 2: Wash and wipe up your hands. (to reduce dust)
- Step 3: Use a wet cloth to clean up your iPad screen, then use the provided microfiber cloth to wipe up the screen.
- Step 4: Remove the marked D BACK blue mask film, and then appears the sticky screen protector, align the protector at the top or bottom of your device, using the features on your device–the camera or home button–as a guide. Make sure both corners are level before pressing down.
- Step 5: Use a credit card or the provided card to push the air bubbles out while sticking the protector to the iPad screen. if still there are small bubbles, pull up one corner of the protector hard to pull up, you can heat the film just slightly with a blow dryer to soften it, but do not overheat the film.), then use the dust absorber or a piece of tape to stick the dust away from the place of bubbles(as the bubbles are main caused by the dust), then put down the protector after removing the bubbles.
- Step 6: Remove the marked 2 FRONT blue mask film and use your finger to press the screen protector tight, then OK.
Watch the installation video on YouTube: https://youtu.be/diVuTXjDCdQ Or scan the following QR code to watch:
ATTENTION:
- Please MUST confirm if this case can work for your device first, Don’t apply the screen protector until you confirm you won’t return this case, as the screen protector can’t be reusable.
- If you need to return the case, please return the unused screen protector together, don’t return the used one.
- If you receive a defective screen protector or you don’t receive the screen protector, please don’t hesitate to contact us ASAP, we will refund you $2 per unit in your order.
- If you like our product, I hope you can leave a review, if you have any problem using this product, please contact us via Amazon message ASAP, and we will respond to you within 24 hours(on weekdays), thank you!
PRODUCT INFORMATION
Hello, thank you for purchasing this case from our store. to make it easy to use this case, please read the following instructions first:
- Confirm Your iPad Model(VERY IMPORTANT) Please find your iPad model number first, it is printed on the back of your iPad (Format: AXXXX), then refer the following model table to confirm your iPad model, your iPad model NEED be same with the one of your order,if not, please return vour order. as the case can’t fit vour iPad.
- Remove black plastic part inside the case.
- Insert 1 iPad corner into the case.
- Push the other 3 corners into the case
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>