EarFun Air S ANC Wireless Earbuds User Manual

EarFun Air S ANC Wireless Earbuds

What’s in the Box

Product Diagram

1. Touch control zone
2. Microphone
3. Earbuds LED indicator
4. Charging contactor
5. USB-C charging port
6. Charging case
7. Reset button
8. Battery level indicator

Charging

1. Fully dry off the earbuds and the USB-C port before charging.
2. Remove the insulating film on the earbuds before using this device.
3. Open or close the charging case to activate the case battery level LED indicator.
4. Place earbuds back into the charging case and the earbuds will start charging.
5. Fully charge both the earbuds and the charging case before the first-time usage.

• Connect USB-C cable for charging
• Wireless charging(not included)

Specifications

• Bluetooth version
  • VS.2
• Bluetooth frequency
  • 2.402GHz-2.480GHz
• Bluetooth transmitted power
  • <7dBm (for EU)
• Bluetooth profile
  • A2DP, AVRCP, HFP, HSP
• Maximum working range
  • l5m(without obstacle)
• Battery capacity
  • 40mAh x 2(earbuds); SOOmAh(charging case)
• Charging time
  • 1 hour(for earbuds); 2 hours(for charging case via USB-C); 3.5 hours(for charging case via wireless charger)
• Playtime
  • ANC OFF–Up to 6 hours, Totally 30 hours with the charging case; (varies by volume level and audio content)
  • ANC ON–Up to 5 hours, Totally 25 hours with the charging case; (varies by volume level and audio content)
• Input
  • 5V 1A
• Dimensions
  • 56mmx65mmx31mm
• Weight
  • 52g

How to Fit

Note: it may affect the noise-canceling effect if you are not wearing the

1. Take tip fit test to ensure the correct size.
2. Identify the left and right earbuds.
3. Place the earbuds in your ear canal and rotate to lock.

Pairing

1. First-time Pairing with Device

   • Step 1: Open the charging case, and the earbuds will automatically power on and enter pairing mode.

   • Step 2: Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices.

   • Step 3: Select “EarFun Air S” from the list of Bluetooth devices shown (if a password is needed, type ‘0000’).
     Notes:

   • The earbuds will automatically connect with the device they were last paired with when the case is open.

   • Each earbud could be used independently.

2. Conned to a New Device
   Option A

   • Step 1: Unpair the earbuds from the Bluetooth-enabled device that’s connected. The earbuds will disconnect from the current device and enter pairing mode for another pair.

   • Step 2: Search on the new device and connect.
     OptionB

   • Step 1: Place both earbuds back into the charging case and make sure they are being charged. Keep the lid open, then press and hold the charging case button for 2 seconds until the LED indicators on the earbuds flash in blue rapidly.

   • Step 2: Search on the new device and connect.

3. How to pair and connect two Bluetooth devices simultaneously?

   • Step 1: Pair the first device and make sure it has been connected successfully.

   • Step 2: Keep the earbuds in the charging case, then press the charging case
     button for 2 seconds until the LED indicators on earbuds flash in blue rapidly, then the earbuds enter pairing mode again.

   • Step 3: Search on the second device and get connected.

Functions

Power on/off

Open the charging case, the earbuds will automatically power on. Place the earbuds back into the charging case and close the case, then the earbuds will automatically power off.

Note: If the earbuds are not connected to any device, they will automatically power off after 10 minutes for saving battery life.

Note:

• Turning on the game mode can drop latency to as low as 100ms and improve the gaming and watching video experience, but it will shorten the connection distance. We suggest you turn off the game mode when you use the earbuds for music.
• The normal mode provides a latency of about 200ms.
• Bluetooth technology can’t eliminate latency.

Earbuds LED Indicator

• Power on
  • Blue indicator flashes for 1 second
• Power off
  • Red indicator flashes for 1 second
• Pairing mode
  • Indicator flashes blue
• Successfully connected
  • Indicator goes out
• Factory reset
  • Indicator flashes purple

Reset and Reconnect

If you fail to build a connection to either earbud or between earbuds and a Bluetooth device, please try the following steps:

1. Place both earbuds into the charging case.
2. Keep the charging case open, then press and hold the charging case button for at least Bs until both earbuds flash in purple, then earbuds have been reset successfully.
3. Delete the old connection from the Bluetooth device and reconnect “EarFun Air S”.

Troubleshooting

Q: Can I use both earphones separately?
A: Yes, each earbud could be used independently.

Q: The earphones are turning on, but it doesn’t connect to my device.
A: To connect the earbuds to your device, please check if the Bluetooth of the device is on at first, then select ‘EarFun Air S’ on the Bluetooth list to get paired. If the earbuds still can’t connect to your device, please try to reset it, or contact our customer support.

Q: Why the connection is not stable and cuts out intermittently?
A: Please make sure there are no objects between the earphones and your Bluetooth device, and make sure there is no radio or WIFI interference nearby.

Q: What is the range of Bluetooth earphones?
A: Bluetooth earphones have a maximum range of 49 feet (15m, no obstacle). However, the actual range will depend on usage and the environment.

Q: Is there volume control on the earphones?
A: Yes, touching L earbud once decreases the volume and touching R once could increase it.

Q: My earphones will not switch on.
A: Please recharge it and make sure it has enough battery power. If it is fully charged and still nothing happens or if you are not able to charge the unit, please contact our customer support for warranty cover.

Q: Is the charging case waterproof?
A: No, the earbuds are sweaty & waterproof, but the charging case is not waterproof.

Q: Will the earbuds shut off automatically?
A: The earbuds will remain on as long as they are connected to a device. If no audio is in use, they will enter power-saving mode and wake up once the audio is played. If the earbuds are not connected to any devices, they will automatically shut off in 10 minutes.

For FAQS and more information: Please Email to: service@myearfun.com
www.myearfun.com

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Compliance

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CAUTION

• Risk of explosion if the battery is replaced by an incorrect type
• Disposal of a battery into fire or a hot event, or mechanically crushing or cutting of a battery, that can result in an explosion; Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; A battery subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Bluetooth”
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Earfun Technology (HK) Limited is under license.

Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
Other trademarks and trade names are those of their respective owners.

EU Declaration of Conformity

Earfun Technology (HK) Limited hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and RoHS 2011/ 65/EU Directive. The declaration of conformity may be consulted in the support section of our Web site, accessible from www.myearfun.com

UK Declaration of Conformity

Hereby, [Earfun Technology (HK) Limited] declares that the radio equipment type [TW201] is in compliance with UK Radio Equipment Regulations (SI 2017/1206). The full text of the declaration of conformity is available at the following internet address: www.myearfun.com

ISED Compliance Statements

This device contains license-exempt transmitter{s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>