sunlite 49176-SU LED Flush Mount Fixture Installation Guide

: August 12, 2024
: sunlite

Table of Contents

sunlite 49176-SU LED Flush Mount Fixture
Product Usage Instructions
INSTALLATION INSTRUCTIONS
INSTALLATION & ASSEMBLY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

sunlite 49176-SU LED Flush Mount Fixture

Product Specifications

Product: LED Flush Mount Fixture
Input Voltage: 100-277VAC
Dimmable: Yes

Product Usage Instructions

Safety Precautions
Before installation and servicing, ensure the following safety precautions:

Turn off the main power at the circuit breaker.
Follow local and National Electrical Code (N.E.C.) standards for electrical connections.
If unsure about electrical wiring, seek the assistance of a qualified electrician.

Installation & Assembly

Remove fixture and mounting package from the box, ensuring no missing parts.
Pull out supply wires and house ground wire from the outlet box. Thread fixture screws into appropriate holes of the outlet box.
Make electrical connections using wire nuts and secure with electrical tape.
Tuck all wires back into the outlet box and secure the fixture pan over it.
Secure the lens and ring to the fixture pan using cap nuts.
Complete installation, restore power, and activate the fixture.

Dimming Compatibility
This product is compatible with most common residential-type dimmers. Dimming performance may vary based on dimmer types.

Frequently Asked Questions (FAQ):

Q: Can this fixture be used in damp locations?
A: This fixture is recommended for indoor dry locations only

Q: Is this fixture suitable for outdoor use?
A: No, this fixture is designed for indoor use only.

INSTALLATION INSTRUCTIONS

READ AND FOLLOW SAFETY INFORMATION

Turn off the main power at the circuit breaker before installing and servicing the fixture to prevent possible injury from electric shock. All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.

INSTALLATION & ASSEMBLY

Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.

Pull the supply wires (4 &5) and house ground wire (6) out from the outlet box (1).
Thread the fixture screws (8) into the appropriate threaded holes of the outlet box (1).
Electrical connections. Connect the black fixture black wire (10) to the black supply wire (5) and the white fixture wire (9) to the white supply wire (4) using wire nut (7).
Connect the fixture ground wire (11) to the supply ground wire (6) together using wire nut (7). Wrap all wire connections with electrical tape to ensure secure connection.
Carefully tuck all wires back into the outlet box. Place the fixture pan (2) over outlet box and feed fixture screws (8) through keyhole slots. Rotate the fixture pan(2) clockwise until screws(8) slid into the narrow end of the keyhole slots and tighten firmly.
Final assembly- Secure the lens (3) and ring (12) to fixture pan (2) using three cap nuts (13).
Installation complete, restore power at the circuit breaker and turn light switch on to activate this fixture..

Dimming- This product is compatible with most common residential-type dimmers, dimming performance depends on dimmers.
Care and maintenance – Use a dry and clean cloth to wipe the surface of the ﬁxture.
Replacement- This LED product has no bulb to replace.