nordlux 1 Ethan Spot Light Instructions
- August 11, 2024
- nordlux
Table of Contents
Nordlux 1 Ethan Spot Light
Specifications
- Product : Lamp Model XYZ
- Class : Class II
- Isolation : Double insulated
- Earth Connection : Not required
Product Information
The Lamp Model XYZ is a Class II product, meaning it is double-insulated for added safety. This lamp does not require connection to the earth line of the installation due to its design.
Usage Instructions
Installation
- Choose a suitable location for the lamp.
- Ensure the area is clear of obstructions.
- Securely mount the lamp according to the provided instructions.
Powering On/Off: To power on the lamp, simply switch on the power button.
To turn it off, switch off the power button.
Maintenance : Regularly clean the lamp using a soft cloth. Avoid using
harsh chemicals that may damage the surface.
Disposal : When disposing of the lamp, follow local regulations for
electronic waste disposal.
Installation
The lamp should only be installed in areas where direct contact with water cannot occur.
The lamp is double-insulated and does not need to be connected to the vallaularoon cord wire
Disposal
Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances that may cause damage to human health and the environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you need to prevent tese products from staling nature and the environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service, or the store where you nitration this product
The lamp is only suitable for connecting directly to the mains.
The mounting instruction must not be discarded.
Important : Always shut off the power to the circuit before starting installation work. In some countries, electrical installation work only be carried out by an authorized electrical contractor. Contact your electricity authority for advice
Do not exceed the maximum wattage.
General maintenance
Use a soft, dry cloth for dusting, and a soft cloth wrung in lukewarm water (<50°C) with a mild detergent to remove grease stains or similar. Never use detergents containing abrasive or solvent. Only switch on the lamp once all the water has evaporated.
Frequently Asked Questions
Q: Is the Lamp Model XYZ suitable for outdoor use?
A: The Lamp Model XYZ is designed for indoor use only.
Q: Can I replace the bulb in Lamp Model XYZ?
A: Yes, you can replace the bulb following the instructions provided in the
user manual.