nordlux 47426101 Latona White 9W 3-4000K LED Under Cabinet Light Installation Guide
- June 1, 2024
- nordlux
Table of Contents
nordlux 47426101 Latona White 9W 3-4000K LED Under Cabinet Light
Specifications
- Model: LATONA
- Color Temperature: Changeable between 3000K and 4000K
- Max. Inter-connected Units: 13pcs
- IP Rating: IP20
Installation
- Ensure power is disconnected before installation.
- Mount the lamp in locations where direct contact with water is not possible.
- Follow the provided interconnection method using the included cable.
Color Temperature Adjustment
To change the color temperature:
- Press the Memory button to select between 3000K and 4000K.
- Use the Reset button to reset the color temperature to default (3000K).
Maintenance and Safety
- If the lamp’s external flexible cable is damaged, replace it only with assistance from the manufacturer or qualified personnel
to avoid hazards.
FAQ
Q: What should I do if the lamp stops working?
A: If the lamp is no longer functioning, contact the manufacturer or
authorized service center for repair or replacement.
Installation
IP20: The lamp should only be installed in areas where
direct contact with water cannot occur.
Class II: The lamp is double-insulated and does not need to be connected to
the yellow/green earth wire.
If the external flexible cable or cord of this luminaire is damaged, it shall
be exclusively replaced by the manufacturer, his service agent or a similar
qualified person in order t o avoid a hazard.
The mounting instruction must not be discarded.
IMPORTANT! Always shut off power to the circuit before starting installation
work. In some countries electrical installation work may only be carried out
by a authorized electrical contractor. (*) Contact your local electricity
authority for advice.The light source of this luminaire is not replaceable;
when the light source reaches its end of life the whole luminaire shall be
replaced.
For indoor use only.