nordlux Vic 35 LED Ceiling Flush Light Installation Guide

nordlux Vic 35 LED Ceiling Flush Light

Installation Instructions

Removal Of Light Source

• IP2X
  Protected against solid objects with a diametre of 12.5 mm or more. Hazardous parts are shielded from contact being made using fingers.

• IPX1
  The lamp is protected against dripping water.

• The lamp is only suitable for connecting directly to the mains.

• The mounting instruction must not be discarded.

• IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. (*)
  Contact your local electricity authority for advice. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

• Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.

• Class II
  The lamp is double-insulated and does not need to be connected to the yellow/green earth wire.

• For indoor use only.

• This product contains a light source of energy efficiency class .

General maintenance

• Use a soft, dry cloth for dusting, and a soft, damp cloth to gently remove grease or similar stains.
• Never use any detergents or chemical reagents.
• Do not switch on the lamp before all the water has evaporated.

Specifically for mouth-blown glass:

• Mouth-blown glass is formed manually.
• Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary.
• This is to be seen as a natural consequence of the manual process and is what gives mouth-blown glass its character and organic look.
• Always clean mouth-blown glass when the glass is cold.

References

• caso.La

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>