nordlux 2412631003 Milford Wall Light Instruction Manual
- June 1, 2024
- nordlux
Table of Contents
nordlux 2412631003 Milford Wall Light
Product Specifications
- Model: MILFORD MINI 241263
- IP Rating: IP20
- Max Wattage: 10W
Product Usage Instructions:
Installation
- Ensure mounting screws are available for installation.
- Follow the provided mounting instructions to securely attach the lamp.
- Do not install in areas where direct contact with water can occur.
- Verify the power source compatibility before connecting the lamp.
Safety Information
- Make sure to adhere to the specified maximum wattage to prevent damage or hazards.
- Do not attempt to replace the lamp’s connection cable.
- Dispose of any waste electrical equipment through proper channels to protect the environment.
Frequently Asked Questions (FAQ)
-
Q: Can I use a bulb with higher wattage than the specified maximum?
A: No, it is recommended to strictly adhere to the specified maximum wattage to prevent damage or hazards. -
Q: Is the lamp suitable for areas where water contact might occur?
A: No, the lamp should only be installed in areas where direct contact with water cannot occur. -
Q: Can I replace the lamp’s connection cable?
A: No, the lamp’s connection cable cannot be replaced. Please do not attempt to modify it.
Installation
IP20 : The lamp should only be installed in areas where direct contact
with water cannot occur.
Class II: The lamp is double-insulated and does not need to be connected to
the yellow/green earth wire
Disposal of waste equipment by users in private households in the European
Union. This symbol indicates that this product must not be disposed of with
your other household waste. Electrical and electronic equipment contain
substances which may cause damage to human health and environment if not
recycled correctly. It is your responsibility to hand over to a designated
collection point for recycling of waste electrical and electronic equipment.
When handing over for correct recycling you help to prevent these products
straining nature and environment unnecessarily and to protect human health.
For more information regarding correct disposal, please contact your local
city office, your household waste disposal service or the store where you
purchased this product.
The lamp is only suitable for connecting directly to the mains.
The mounting instruction must not be discarded.
MAX 10W- Do not exceed the maximum wattage.
IMPORTANT! Always shut off power to the circuit before starting
installation work. In some countries electrical installation work may only be
carried out by a authorized electrical contractor. Contact your local
electricity authority for advice.
Z-connection: the wire cannot be replaced if damaged, and the lamp must be
discarded.
General maintenance: Use a soft, dry cloth for dusting, and a soft, damp cloth
to gently remove grease or similar stains. Never use any detergents or
chemical reagents. Do not switch on the lamp before all the water has
evaporated. Specifically for mouth-blown glass: Mouth-blown glass is formed
manually. Because of this unique process, air bubbles may occur in the glass,
just as the thickness of the glass may vary. This is to be seen as a natural
consequence of the manual process and is what gives mouth-blown glass its
character and organic look. Always clean mouth-blown glass when the glass is
cold.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>