E25089-54SN Burst 12 Light LED Pendant

“`html

Product Specifications:

• Item/Model Number: E25089-54SN Burst 12-Light LED Pendant –
  Frost

• Lamping | Ampoule: [12] x [G4] [1.8W] (Included)

• Origin: Made in China

Product Usage Instructions:

Installation for Pendant:

1. Run wire through stems and combine stem lengths to meet desired
   mounting height.

2. If using the 0-10V dimming structure, lead wires must go down
   to the center body. Refer to page 6 for instructions on connecting
   the Violet(+) and Gary(-) wires.

Installation for Semi Flush Mount:

1. If using the 0-10V dimming structure, lead wires must go down
   to the center body. Refer to page 6 for instructions on connecting
   the Violet(+) and Gary(-) wires.

FAQ:

Q: What are the factory connections for the voltage
input?

A: The factory connections are Red(+) for the
inner conductor and Black(-) for the outer mesh.

Q: What dimmer switches are compatible with this
product?

A: Verified list of tested drivers includes
Lutron DVCL-153P, Lutron SCL-153P, Leviton IPLO6, Leviton 6674,
Deako Simple Dimmer. Ensure compatibility with these models.

Q: What should be the maximum wattage on a dimmer for
this fixture?

A: Due to inrush current, wattage should not
exceed 150W on a 600W dimmer.

Q: What happens if the control is not properly paired
with LED fixtures?

A: Irreparable damage may occur. Ensure proper
pairing of controls to avoid damage.

Q: Where can I find more information on dimming
compatibility?

A: If your dimmer is not listed, consult a
lighting professional or visit the Dimming Compatibility Chart
online at www.et2online.com.

“`

o n t e m p o r a r y L i g h t i n g
Item/Model Number: E25089-54SN Burst 12-Light LED Pendant – Frost

Lamping | Ampoule: “[12] x [G4] [1.8W] (Included)”

Please consult a qualified electrician prior to install

Veuillez consulter un électricien qualifié pour suspendre le luminaire et le câblage.

Made in China | Fabrique en Chine | Hecho en China

1 of (6)

/(‘/2:92/7$*(,16758&7,216

Z’^ & Z Z Z

ZZZZ Z
tZZZZ ZZZ ZZ
Z Z

Z Z
ZZZZZ ZZZ ZZZ
ZZZ ZZ

Z ZZ
ZZ ZZZZZZ ZZZZ
ZZZZZZ ZZZZ

<ZZ Z
ZZZZ Z
ZZZ Z
dZZ ZZZZ
ZZZZ ZZZ
Z Z ZZ < Z

ZZ ZZ

DZ ZZZ

ZZZ Z ZZ
Z Z Z Z Z Z
WZZZZ ZZZZZZ

Z Z ZZ
ZZZZZ ZZZ
dZZZ ZZZZ

EZZZ ZZ EZZ
Z dZ

EZZZZ ZZZZ
EZZZZZZ
ZZ ZZ D Z Z Z Z

/Z
ZZ ZZ
ZZZ ZZZZZ Z
^ZZZZZZ Z
KZZZ Z
ZZZZZ
tZE/E’tZZZZ ZZZZ ZZZZ

Z Z ZZ

/Z>

ZZZ ZZZ

WZZZZ Z ZZ
ZZZ

WZZZ Z
Z Z

Z ZZ
E Z ZZ ZZZ
sZd/^^DEd>ZZ ZZZ ZZ

^ZZZZZZZ Z Z
EZZZ ZZZ
sZdE/>Z ZZZZZZ ZZ

D
K Z Z Z Z Z
&ZZ ZZZZ Z
ZZZZ Z
WZ

EZD
^ZZZZ
WZ Z Z Z Z Z Z
EZZZZ EZ
WZ Z Z Z Z

DZ
Z Z Z ZZZ Z Z
WZZ Z ZZ Z ZZZ
hZZZZ ZZZ
W Z ZZ Z

WZZZZZ ZZZZZ

^ ZZ ZZ Z Z Z Z ZZZZ

ZZZZ Z ZZZ

RI6

Eng PARTS
Before getting,started,ensure the package contains the following components:

Fra PIÈCES

Esp PARTES

Antes de comenzar, asegurese de que el paquete Avant de commencer,assurez-vous qu le

contenga los siguientes componentes:

paquet contient les composants suivants:

H

x1

STR06206SN-NK 1PCS

A

x1

STR06212SN-NK 3PCS

I

x12

BL1-8G4CL12V30(Included)

B

x1 J

x8

EGLS25084-54

C

x2 K

x4

8-32 x 1.25″

EGLS25087-54

D

x3 L

x1

CV

E

120-277V 12 V or 2500 mA

x1 M

5 ” L . 2.36 ” W . 1.06 ” H

x1

F

x1 N

x2

8-32 x1/2″

G

x1

3 of (6)

Install For Pendant
H F G B(Ring
If you want to use the 0-10V dimming structure, you need to have lead wires go down to the center body.Read the page 6, connect the Violet(+) and Gary(-) wires according to the instruction.
E (LED DRIVER)
A

0.75″
I
7″ J

0.5″
5″ K

1. Run wire through stems and combine stem lengths to meet desired mounting height.

H

4 of (6)

Install For Semi Flush Mount
L A E(LED DRIVER)
If you want to use the 0-10V dimming structure, you need to have lead wires go down to the center body.Read the page 6, connect the Violet(+) and Gary(-) wires according to the instruction.

0.75″
I
7″ J

0.5″
5″ K

5 of (6)

o n t e m p o r a r y L i g h t i n g
ITEM/MODEL: E25089-54SN

WIRING DIAGRAM
M UST be installed by an experienced professional CRITICAL KNOWLEDGE of elect ronic lighting systems required

IM PROPER WIRING and/ or INCORRECT DIM M ER use can cause CATASTROPHIC DAM AGE! THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH DO NOT CUT FACTORY-MADE CONNECTIONS.

VOLTAGE INPUT
120- 277 V AC, 60 Hz

WHITE (N)

BLACK (L)

Black White
27 (mm)

CV 120-277V 12 V or 2500 mA
5 ” L . 2.36 ” W . 1.06 ” H 127 (mm)
Rod

PVD30-C250V12-UNV4-HE-P

+ –

Black (-)

Red (+)

FACTORY CONNECTIONS (+) INNER CONUCTOR l OUTER M ESH (-)

SCHEMATIC FOR GENERAL REFERENCE ONLY

VERIFIED LIST OF TESTED DRIVERS

GENERAL COMPATIBILITY

Lut ron DVCL-153P Lut ron SCL-153P Levit on IPLO6 Levit on 6674 Deako Simple Dimmer

TRIC / FORWARD PHASE ELV / RECERSE PHASE 0-10V / LOW VOLTAGE W iFi / WiZ Connect ed

Due t o inrush current , w attage should not exceeed 150W on a 600W dimmer

IMPORTANT!
If t he cont rol is not paired properly to LED fixt ures, irreparable damage may occur.
If the dimmer you are using is not list ed here, consult a light ing professional or view our Dimming Compat ibility Chart online: w w w .et2online.com

2023 ET2 CONTEMPORARY LIGHTING

6 of (6)

References

• ET2 Lighting | Indoor & Outdoor Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>