Kandao WL0308 All In One Conference Camera User Guide

Kandao WL0308 All-In-One Conference Camera

Specifications:

• Parts : Lens module, Control unit, Ring lamp
• Switch modes: Vol-, Vol+, Built-in speaker, Microphone Mute
• Ports : DC port, Extended cable port, USB port

Product Usage Instructions

Connection Information:

1. Connect the camera with a V.A. adapter.
2. Press the lens module to start the camera. The blue light will flash quickly and then switch to slow flash when the camera is ready for work (approximately 5 seconds).
3. Connect the camera to a PC via USB.
4. Start your desired video conference platform (Teams, Skype, ZOOM, etc) and enter a distant conference. The instruction light will be steady blue.
5. Use the camera buttons to adjust voice volume, mute the microphone, and switch modes during the conference.
6. After the conference, press the lens module to turn off the camera.

Firmware Update:

1. Turn on the camera and connect it to a PC.
2. Press and hold the mode button for 5 seconds until the blue light flashes quickly. The camera enters USB mode when the instruction light turns red.
3. Copy the firmware to the camera’s USB.
4. Restart the camera to initiate the system update. The blue light will flash slowly once the update is complete.

Parts Description

Connection Information

1. Get the camera connected with 12V 3.0A adapter.
2. Press the lens module to start the camera, when it’s pop-up, the blue light flashes quickly then switch to slowly flash when the camera is ready for work. The whole process is about 30 seconds.
3. Connect PC with the camera via USB.
4. Start a video conference platform(Teams, Skype, ZOOM, etc), enter a distant conference, instruction light will be steady blue.
5. Click the camera buttons to turn down/up voice, mute microphone, and switch modes.
6. When a conference is dismissed, press lens module to turn off the camera.

Note: You may need to select the Kandao Meeting camera and microphone when using some video conferencing platforms.

Firmware update

1. Turn on the camera and get it connected with PC, long hold mode button for 5 seconds, The blue light flashes quickly,and the camera enter in USB mode when the instruction light stays red.
2. Copy firmware to camera USB.
3. Restart the camera to enter system update, when the update is done, blue light would turn to flashing slowly.

Scan the QR Code to
Watch the Tutorial Video

Link for downloading Firmware:www.kandaovr.com/download

Packing List

Statement

1. Please read these instructions.
2. Please pay attention to all warnings.
3. Please follow all instructions.
4. Never operate the device near heat sources such as radiators, heaters, stoves, or other heat-generating equipment
5. Only use accessories and parts specified and provided by the manufacturer for Kandao.
6. All maintenance should be conducted by qualified personnel. Repairs are required in case of any type of damage to the device, for example, power cord or plug damage, liquid or object falling into the device, or getting wet in the rain or dampness, or failure to work or falling.

Camera Security
Warning: If you fail to take the following precautions, you may be seriously injured or killed by the electric shock or fire disaster, or your Intelligent 360-degree panoramic camera may be damaged: Please check before using the camera and accessories to make sure they are intact. For security, only Kandao accessories that are provided with the device or genuine ones purchased can be used. Using any other parts, accessories, or chargers not recommended by Kandao may result in fire, electric shock, or causalities. Damage caused by the use of unauthorized accessories or parts is not covered by the warranty.

1. Do not place or fix the product on an unstable surface. Failure to follow this precaution may cause the product to loosen or fall off, causing an accident or damage to the camera.
2. When using an external power supply connection, please observe all safety rules of third-party power supply equipment.
3. The le ns of the Intelligent 360-degree panoramic camera is made of glass.If the lens is damaged, be sure to handle it carefully to avoid being scratched by the broken
4. The temperature of the camera may rise during operation, which is a normal phenomenon during use. In this case, turn off the camera and leave it to cool before trying to use it.
5. This product is not a toy and you are solely responsible for complying with all local laws, regulations, and restrictions.
6. Please do not use the Intelligent 360-degree panoramic camera for unauthorized monitoring, candid shooting or in any way that violates personal privacy regulations. Normally, the use of cameras for such purposes is strictly prohibited and can result in significant liability and criminal proceedings against the operator.
7. Precautions : do not put the camera in an extremely cold or hot environment. Extremely cold or hot conditions may cause the camera to temporarily not work properly.
8. Warning : there is no protection for the two lenses of the Intelligent 360-degree panoramic camera. If you do not pay attention, it is easy to form scratches. Avoid placing the lens on any surface. Lens scratches are not covered by the warranty.

This symbol indicates that your product should be handled separately from household waste according to local laws and regulations. When the product life ends, please take it to the collection site designated by the local authority. The separate collection and recycling of discarded products are helpful to the protection of natural resources. Besides, please make sure that they are recycled in ways that are beneficial to human health and environmental protection.

Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

www.kandaovr.com

• Name : Intelligent 360-degree panoramic camera /360
• Model : WL0308
• Tel : +86 400 832 1900
• Email:service@kandaovr.com
• Manufacturer: KanDao Technology Co., Ltd.
• Address: 503, Building 1, Dayun Soft Parts Town, 8288 Longgang Avenue, Heao Community, Yuanshan Street, Longgang District, Shenzhen

FAQ

Q: How do I update the firmware of the camera?
A: To update the firmware, turn on the camera, connect it to a PC, and press and hold the mode button for 5 seconds until the blue light flashes quickly. Copy the firmware to the camera’s USB and restart it for the update process.

Q: How do I start a video conference using the camera?
A: Connect the camera with a V.A. adapter, press the lens module to start it, connect it to a PC via USB, and join your desired video conference platform. Use the camera buttons to adjust settings during the conference.

References

• KanDao - 360 VR Camera | 3D Camera | 3D 360 Camera | 3D VR Camera
• KanDao - 360 VR Camera | 3D Camera | 3D 360 Camera | 3D VR Camera

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>