KANDAO MT1002 Meeting Ultra Standard AI 360 Degree Video Conferencing All In One Machine User Guide
- June 11, 2024
- KANDAO
Table of Contents
KANDAO MT1002 Meeting Ultra Standard AI 360 Degree Video Conferencing All
In One Machine User Guide
Safety Guidelines
Warning:If you fail to take the following precautions, you may be seriously
injured or killed by the electric shock or fire disaster. Or may cause damage
to your Kandao Meeting Ultra Standard. Please check before using the product
and accessories to make sure they are intact. For security, only Kandao
accessories that are provided with the product or genuine ones purchased can
be used.
Damage caused by the use of unauthorized accessories or parts is not covered
by the warranty. To learn about approved accessories, please visit Kandao
official website www.kandaovr.com.
- Do not place or fix the product on an unstable surface. Failure to follow this precaution may cause the product to loosen or fall off, causing an accident or damage to product.
- When using external power supply connection, please observe all safety rules of third-party power supply equipment.
- The lens of Kandao Meeting Ultra Standard is made of glass. If the lens is damaged, be sure to handle it carefully to avoid being scratched by the broken lens/glass.
- The temperature of the product may rise during normal usage. Can please turn off the product and leave it to cool before using again.
- This product is not a toy and you are solely responsible for complying with all local laws, regulations and restrictions.
- Please do not use Kandao Meeting Ultra Standard for unauthorized monitoring, candid shooting or in any way that violates personal privacy regulations.
- Precautions: do not put the product in extremely cold or hot environment. Extremely cold or hot conditions may cause the product to temporarily stop working properly.
- Warning: there is no protection for two lenses of Kandao Meeting UltraStandard after taking off the lens cover. Please use it carefully to avoid lens scratches. Avoid placing the lens directly on any surface. Lens scratches are not covered by the warranty
This symbol indicates that according to local laws and regulations, your product should be disposed of separately from household waste. When the product life ends, please take it to the collection point designated by the local authority. Separate collection and recycling of products when they are disposed of will help protect natural resources and ensure that they are recycled in a way that is beneficial to human health and protects the environment.
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
CAUTION
- Risk of explosion if the battery is replaced by an incorrect type
- disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
- leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
- a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
Name: KanDao Meeting Ultra Standard/ Kandao Meeting Ultra
Model: MT1002
Input: PoE 44-58V 1A(IEEE802.3bt) USB-C Power Port 15V 3A
Manufacturer: KanDao Technology Co.,Ltd.
Address: 503, Building 1, Dayun Soft Parts Town, No. 8288, Longgang
Avenue, Heao Community,
Yuanshan Street, Longgang District, Shenzhen
This device complies with Part 15of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.