cudy GS1010P 8 Port Gigabit PoE plus Switch Installation Guide

cudy GS1010P 8 Port Gigabit PoE plus Switch

Specifications

• Model: GS1010P
• Network Protocol: IEEE802.3 / IEEE802.3u IEEE802.3x / IEEE802.3ab IEEE802.3at (30W) and IEEE802.3af (15.4w)
• Power Input: AC INPUT 100V-240V, DC 52V ~ 2.3A
• Power over Ethernet: 52V Power over spare pairs 1/2(+) , 3/6 (-)
• Dimensions: 200mm118mm44mm
• Bandwidth: 20 Gbps (non-blocking)
• Pack Forward Rate: 14.88Mpps
• Jumbo Frame: 2048 bytes
• MAC Address Table: 2K
• Packet Buffer Memory: 448K
• Working Temperature: -10~50°C
• Storage Temperature: -40~70°C
• Working Humidity: 10%~90%, non-condensing
• Storage Humidity: 5%~90%, non-condensing

Product Usage Instructions

Hardware Connection
Ensure the following devices are connected to the switch:

• Powered Device (PD)
• Power Socket
• Ethernet Device (switch, router, etc.)
• IP Camera
• Wireless AP
• Smart VoIP

Physical Appearance
The switch has a front board with LED indicators and a back board with power input port.

LED and Interface Explanation
The Power LED (PWR) on ports 1-10 indicates the power status and data transmission.

• PWR LED: Green Light (Link&Data)
  • ON: Powered
  • OFF: No power
  • Flash: Data transmitting

DIP Explanation
The switch supports VLAN, Default, Extend, Port Isolation, and Standard Switch Link Extension for efficient network management.

Frequently Asked Questions (FAQ)

• Q: How can I reset the switch to its factory settings?
  A: To reset the switch, press and hold the Reset button located on the back of the device for at least 10 seconds until the LEDs flash, indicating a successful reset.

• Q: What is the maximum PoE transmission distance supported by the switch?
  A: The maximum PoE transmission distance supported by the switch is 250 meters when ports 7-8 are used.

Hardware Connection

Physical Appearance

Specifications

DIP Explanation

5 LED and Interface Explanation

Quick Installation Guide
Model: GS1010P

EU declaration of conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The original EU declaration of conformity may be found at http://www.cudy.com/
Email: support@cudy.com
www.cudy.com

References

• Cudy, Your Home and Business Networking Solutions Provider
• Cudy, Your Home and Business Networking Solutions Provider

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>