freewing FJ211 F-16 Fighting Falcon Alaska Snow Camo User Manual

freewing FJ211 F-16 Fighting Falcon Alaska Snow Camo

Specifications

• Wingspan: 878mm
• Length: 1306mm

Product Information

The F-16C Fighting Falcon is a single-engine multirole fighter aircraft initially developed for the United States Air Force. Known for its air superiority capabilities, it has evolved into a versatile all-weather multirole aircraft. The model by Freewing replicates this aircraft using EPO foam with a 70mm electric ducted fan powerplant. Featuring an internal M61 Vulcan cannon and various mounting locations for weapons, it is a detailed and durable replica suitable for flying enthusiasts.

Features

• Accurate scale outline with sharp surface details
• Removable main wings and magnetic nose cone for easy transport
• Secure cockpit battery bay cover with sliding latch
• Reinforced with carbon tubes for durability during flight maneuvers

Product Usage Instructions

PNP Installation Instruction:
Follow the provided guide to install the pre-installed power system and servos in the PNP version of the aircraft.

Servo Installation Instructions
Refer to the servo installation instructions for details on installing the servos in the aircraft.

Landing Gear Installation Instructions
Instructions on installing the landing gear can be found in the manual. Follow them carefully for proper assembly.

FAQ

• Q: What versions of the F-16 Fighting Falcon are available?
  

  • A: The F-16 Fighting Falcon is available in Standard, Upgrade, and Professional versions, each offering different specifications and features.

• Q: What is included in the packing list?
  

  • A: The standard version includes various components like the fuselage, main wing, vertical tail, horizontal tail, and nose cone. Additional details are provided in the manual.

F-16 FFIAGLHCTIONNG

USER MANUAL

Wingspan:878mm

Item No.: FJ211 Version No.: FJ211-V01

www.sz-freewing.com

Introduction

• The F-16C “Fighting Falcon” is a single-engine multirole fighter aircraft originally developed for the United States Air Force (USAF). Designed as an air superiority day fighter, it evolved into a successful all-weather multirole aircraft. The F-16C features an internal M61 Vulcan cannon and multiple locations for mounting weapons and other mission equipment. Operating in nearly 30 countries to this day, the F-16 has distinguished its place in aviation history.

• Freewing has modeled this brilliant aircraft in EPO foam with a 70mm electric ducted fan (EDF) powerplant. With a 1306mm length and 878mm wingspan, this 1/12 scale flying replica includes many exciting features! An accurate scale outline with sharp surface details and panel lines make this model stand out at your airfield. Removable main wings and a magnetic nose cone make transport very convenient. The cockpit battery bay cover is secured with a sliding latch to prevent separation during flight, and the entire aircraft is reinforced with strategic placement of carbon tubes to withstand vigorous flying maneuvers.
  Our Freewing 70mm F-16C V2 model jet uses electric retractable landing gear for lower drag and better scale appearance during flight. The model is offered in three different powerplant options: 4s

• Standard, 6s Upgrade, and 6s Professional. These powerplants achieve a maximum flying speed of 125kph, 140kph, and 165kph, respectively. The aircraft is designed for stability, strong climbing performance, and short takeoff distance, suitable for all levels of jet pilots. The aircraft can also maintain a high alpha of 30 degrees to demonstrate its superior low speed stability.

• We feature this exciting aircraft in the modern three tone gray US Air Force base colors, and three decal sets are included for you to choose from to customize your model from various actual Air Force squadrons.

NOTE: This is not a toy. Not for children under 14 years. Young people under the age of 14 should only be permitted to operate his model under the instruction and supervision of an adult. Please keep these instructions for further reference after completing model assembly.

Note

1. This is not a toy! Operator should have a certain experience, beginners should operate under the guidance of professional players.
2. Before install, please read through the instructions carefully and operate strictly under instructions.
3. Cause of wrong operation, Freewing and its vendors will not be held responsible for any losses.
4. Model planes’ players must be on the age of 14 years old.
5. This plane used the EPO material with surface spray paint, don’t use chemical to clean, otherwise it will damage.
6. You should be careful to avoid flying in areas such as public places, high-voltage-intensive areas ,near the highway, near the airport or any other place where laws and regulation clearly prohibit.
7. You cannot fly in bad weather conditions such as thunderstorms, snows….
8. Model plane’s battery, don’t allowed to put in everywhere. Storage must ensure that there is no inflammable and explosive materials in the round of 2M range.
9. Damaged or scrap battery should be properly recycled, it can’t discard to avoid spontaneous combustion and fire.
10. In flying field, the waste after flying should be properly handled, it can’t be abandoned or burned.
11. In any case, you must ensure that the throttle is in the low position and transmitter switch on, then it can connect the lipo-battery in aircraft.
12. Do not try to take planes by hand when flying or slow landing process. You must wait for landing stop, then carry it.

Product basic parameters

Standard version

• Wing loading ：121g/dm2
• Motor: 2849-2850KV(4S) brushless Outrunner motor
• Ducted fan : 70mm 12-blade ducted fan
• Flight speed: 125km/h
• ESC: 60A brushless ESC
• Servo: 9g digit plastic servo(6pcs)
• Weight: 1400g (without battery)
• Thrust: 1500g

Upgrade version

• Wing loading: 145g/dm2
• Motor: 3048-2150KV(6S) brushless Outrunner motor
• Ducted fan : 70mm 12-blade ducted fan
• Flight speed : 140km/h
• ESC : 60A brushless ESC
• Servo: 9g digit metal gear servo (6pcs)
• Weight: 1450g (without battery)
• Weight: 2150g (without battery)

Professional version

• Wing loading :145g/dm2
• Motor: 3048-2300KV(6S) brushless Outrunner motor
• Ducted fan: 70mm 12-blade ducted fan
• ESC: 80A brushless ESC
• Servo: 9g digit metal gear servo(6pcs)
• Flight speed: 165km/h
• Weight: 1450g (without battery)
• Weight: 2400g (without battery)

Note: The parameters in here are derived from test result using our accessories. If use other accessories, the test result will be different. Any problem since of using other accessories, we are not able to provide technical support. The package don’t include the misses and pylons, if you need, please contact your local dealer.

Packing list

electronic equipment
2| Main wing| Pre-installed all electronic parts| Pre-installed servo| No electronic equipment
3| Vertical tail| Pre-installed all electronic parts| Pre-installed servo| No electronic equipment
4| Horizontal tail| | |
5| Nose cone FIn| | |
NO.| Parts Name| PNP| KIT Plus| Airframe
---|---|---|---|---
1| Fuselage| Pre-install power system and servos| Pre-installed servo| No electronic equipment
2| Main wing| Pre-installed all electronic parts| Pre-installed servo| No electronic equipment
3| Vertical tail| Pre-installed all electronic parts| Pre-installed servo| No electronic equipment
4| Horizontal tail| | |
5| Nose cone、FIn| | |

PNP Installation Instruction

Install  main  wing

Tail wing set

Install Horizontal tail
As the right photo shown

1. Use glue to attach the horizontal tail on the tail fuselage.
2. Use glue to attach the carbon piece on the bottom of elevator, it can be stronger.
3. Repeat above steps to install another horizontal tail.

• A – Tail fuselage
• B – Horizontal tail
• C – Carbon piece

Note: There is a EPO glue on package ,please use it to glue. Glue should be spread evenly, and wait for 90 seconds .Then install on, its best glue condition.

Install Vertical tail

1. Insert the vertical tail servo cable in the trough
2. Use glue to fix the vertical tail

• A – Vertical tail
• B – Trough
• C – Servo cable

Install missiles and pylons
(Note: The package don’t include the missiles and pylons, if you need, please contact your local dealer.)

Servos install introduction

Install main wing servos

1. Use servo tester or radio to center the servo.
2. Use glue to install the servo and aileron horn on the main wing.
3. Buckle the servo cable to the through, after installed all the servos, stick on the decal.
4. One side pushrod insert to the servo arm ,adjust its length. And insert the clevis to the aileron horn.
5. Repeat the above four steps, install the other side main wing servo and flap servo.

Install elevator servos

1. Use servo tester or radio to center the servo arm.
2. Use glue to fix servo on the elevator servo mount .
3. One side pushrod insert to the servo arm, adjust its length. And insert the clevis to the aileron horn.
4. Repeat the above steps to install on the other side servo.

Install rudder servos

1. Use servo tester or radio to center the servo arm.
2. Use glue to fix the servo and servo arm on the rudder.(Refer to the right photo)
3. Press the servo cable on the servo cable trough.
4. After glue solidify, connect the pushrod to servo and servo arm.

Landing gear Installation Instructions

Install nose landing gear
Please refer to the following photo assemble replace revise the nose landing gear

Spare part name and parameters

• A- Jimi screws (M3x3 1pcs)
• B- Wheel chock
• C- Wheel
• D- Nose gear main strut
• E- L-Shape arm
• F- Jimi screw (M3x3)
• G – Nose gear steering ring
• H- Nose gear steering rod
• I – Metal shaft
• J – Buckle (Ø2.0mm 1pcs)
• K- Nose gear plastic cover(left)
• L – Nose gear plastic cover(right)
• M – Screw (PA1.7×8 2pcs)
• M1 – Screw (PB1.0x10 3pcs)
• N- Screw (KA2.6×12 4pcs)
• O – Nose gear screw fixed part
• P – Nose gear installed set
• Q- Servo
• R- Screw (PWA2.0x8 2pcs)
• S – Steering pushrod
• T – Nose cabin door

Note When installing ,please check the flat position of spare parts, when screw to fix, the flat position must face to the screw hole ,just like this ,it can fix successfully, the spare parts dont rotate and fall off.

Install rear landing gear
Please assemble disassemble the rear landing gear according to the following photo.

• A Jimi screw (M3x3 1pcs)
• B Wheel chock
• C Wheel
• D Rear gear main strut
• E Electric retractable controller
• F Jimi screw (M3x3 2pcs)
• G Rear gear installed set
• H Rear gear screw fixed part
• I Screw (KA2.6×12 8pcs)
• J Rear cabin door

Servo parameters

The servo positive or reverse rotation is defined as follows

• When servo input signal change from 1000us to 2000us,
• The servo arm is rotated clockwise, its positive servo.
• The servo arm is rotated counterclockwise, its reverse servo.

If you need to purchase other brand servo, please refer to the following list to choose correct size servo.

Servo position| Servo regulation| No.| Standard/Reverse| Servo cable length
---|---|---|---|---
Nose steering| 9g Digit-Plastic| 1| Standard| 100mm
Left aileron| 9g Digit-Plastic| 2| Standard| 200mm
Right aileron| 9g Digit-Plastic| 3| Standard| 200mm
Left elevator| 9g Digit-Plastic| 4| Standard| 850mm
Right aileron| 9g Digit-Plastic| 5| Reverse| 850mm
Rudder| 9g Digit-Plastic| 6| Standard| 900mm

Control board instruction

• According to the note, connect the related servo cables in the control board.
• The control surface is not any note on the control board, connect directly to the receiver.

Motor parameters

Item No.| EDF Fans| Voltage (V)| Current (A)| Power (W)| Thrust

( Kg )

| Efficiency

( g / w )

| Motor Specifications| Rotating speed

(rpm)

| Weight (g)
---|---|---|---|---|---|---|---|---|---
E7215| 70mm

12-blade EDF

| 14.8| 55-60| 880| 1.5-1.6| 1.76| 2849-2850| 42000| 146
E7216| 70mm

12-blade EDF

| 22.2| 55-60| 1330| 2.05-2.25| 1.65| 3048-2150| 47700| 180.7
E7217| 70mm

12-blade EDF

| 22.2| 65-72| 1510| 2.3-2.5| 1.6| 3048-2300| 51000| 180.7

Power system instructions

Standard version

• A 2849-2850KV Brushless Outrunner motor
• B 70mm Outrunner ducted frame
• C Screw (PWM3x6 4pcs)
• D Motor chuck
• E Motor chuck fixed plate
• F 70mm 12-blade ducted fan
• G Spacer
• H Nut
• I Spinner
• J Screw (M3x8 1pcs)

Upgrade version

• A 3048-2150KV Brushless Outrunner motor
• B 70mm Outrunner ducted frame\
• C Screw (PWM3x6 4pcs)
• D Motor chuck
• E Motor chuck fixed plate
• F 70mm 12-blade ducted fan
• G Spacer
• H Nut
• I Spinner
• J Screw (M3x8 1pcs)

Professional version

• A 3048-2300KV Brushless Outrunner motor
• B 70mm Outrunner ducted frame
• C Screw (PWM3x6 4pcs)
• D Motor chuck
• E Motor chuck fixed plate
• F 70mm 12-blade ducted fan
• G Spacer
• H Nut
• I Spinner
• J Screw (M3x8 1pcs)

Note: When ESC and battery connected, prohibit to touch them by hand to avoid accidental injury. When test EDF, please use safety test stand for testing, prohibit to touch by hand for testing.

Refer to the following diagram, install ESC and power system

• A Screw (PA3x25 2pcs)
• B ESC fixed wood piece 1
• C ESC
• D ESC fixed wood piece 2
• E Intake grid
• F Screw (PWA3x8 4pcs) 70mm
• G EDF power system
• H Screw (KA2.6×8 3pcs)
• I EDF cover
• J Screw (KA2.6×8 4pcs)
• K FIn

Install battery

Before connect the battery and receiver, please switch on the transmitter power and make sure the throttle stick is in the lowest position.

The battery capacity and discharge rate we advise to use are as follows

• 4S  14.8V  2600~4000mAh
• 6S    22.2V   2600~4000mAh

discharge rate 30C

Center of Gravity
Correct center of gravity is directly related to the success of the flight, please refer to the following CG diagram to adjust your plane’s center of gravity.

• You can move the battery forward or backward to adjust the center of gravity.
• If you can not adjust the CG through move the battery, you can also use some other suitable material weight to counterweight, to make sure that CG is in the correct position.

Control direction test
After installed the plane, before flying, we need a fully charged battery and connect to the ESC, then use radio to test and check that every control surface work properly.

Dual Rates
According to our testing experience, according to the following parameters to set the aileron/elevator rate, it will be useful for flight. In low rate, its good for flight control and its suitable for the initial flight or less skilled players. According to your own circumstance, choose one rate in flight.

| Aileron| Elevator| Rudder
---|---|---|---
Low Rate| H1/H2 22mm/22mm D/R Rate: 65%| H1/H2 19mm/19mm D/R Rate: 80%| H1/H2 30mm/30mm D/R Rate: 85%
High Rate| H1/H2 34mm/34mm D/R Rate: 100%| H1/H2 23mm/23mm D/R Rate: 100%| H1/H2 35mm/35mm D/R Rate: 100%

Dongguan Freewing Electronic Technology Ltd
HK Freewing Model International Limited

• Add.:FeiYi Building ,face to Labor Bureau, Fu min Middle Road, Dalang Town, Dongguan City , Guangdong Province, China
• W eb: http://www.sz-freewing.com
• Email:freewing@sz-freewing.com
• Tel: 86-769-82669669 Fax:86-769-82033233
• Web : http://www.sz-freewing.com
• Email:freewing@sz-freewing.com
• Tel : 86-769-82669669
• b:86-769-82033233

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>