20L Drawer Fridge Freezer

“`html

Product Information

Specifications

• Model: GH2008
• Capacity: 20L
• Type: Drawer Fridge/Freezer
• Power Input: DC 12V/24V or AC 100-240V
• Dimensions: 698mm x 440mm x 250mm

Product Usage Instructions

Before First Use

Ensure the refrigerator is not damaged upon receiving. Report
any transportation damage promptly.

Box Contents

• 1 x Drawer Fridge/Freezer
• 1 x 12/24V Car Cigarette Power Lead

Operation

1. Display Screen Initialization:

Connect to DC 12V/24V power or AC 100-240V power. The display
will light up for 2 seconds before entering normal operating
mode.

2. Battery Protection Mode:

Long press button for three seconds to select battery protection
modes (H/M/L).

3. Temperature Unit Setting:

Turn off the fridge, long press button to select Celsius or
Fahrenheit.

4. Reset:

Switch off the fridge, keep pressing button until E1 displays,
then press + and – simultaneously to reset.

Installation

1. Inspect for damage upon unpacking.
2. Install the fridge with proper ventilation space (50mm back,
   10mm side).

Troubleshooting

FAQ

Q: How do I adjust the temperature settings?

A: Turn off the fridge, long press the designated button until
the desired temperature unit is displayed, then use the +/- buttons
to select Celsius or Fahrenheit.

“`

GH2008
20L DRAWER
FRIDGE/FREEZER
INSTRUCTION MANUAL

CONTENTS Warnings & Safety Information ……………………………………………………………… 3 Before First Use …………………………………………………………………………………….. 4 Features…………………………………………………………………………………………………. 5 Box Contents ………………………………………………………………………………………….. 5 Product Diagram ……………………………………………………………………………………. 5 Product Dimensions ………………………………………………………………………………. 6 Operation ……………………………………………………………………………………………….. 6 Installation……………………………………………………………………………………………… 7 Troubleshooting …………………………………………………………………………………….. 8 Cleaning, Care, Storage & Maintenance…………………………………………………. 9 Smart Control – Fridge App Instructions ………………………………………………10 Specifications ……………………………………………………………………………………….11 Food Storage…………………………………………………………………………………………11 Warranty Information……………………………………………………………………………12
2

WARNINGS & SAFETY INFORMATION
WARNING: The manufacturer is not responsible for any potential injury from misuse
Warnings · Do not operate the appliance if it is visibly damaged. · Do not block the gaps of the fridge with things like pins or wires, etc. · Do not expose the appliance to rain or immerse it in water. · Do not place the appliance near naked flames or other heat sources (heaters, direct
sunlight, gas ovens etc.) · Do not store any explosive substances like spray cans with a flammable propellant. · Ensure the supply cord is dry and not trapped or damaged. Do not locate multiple
portable socket-outlets or portable power supplies at the rear of the appliance. · Check the voltage specification on the type plate corresponds to that of the energy
supply. The appliance is only to be used with the power supply unit provided with the appliance. · Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. · Once unpacked and before turning on, the appliance must be placed on a level surface for more than 6 hours. · Make sure that the appliance stays horizontally when it is running. The tilt angle must be less than 5° for long time running and be less than 45° for short time running. · Keep the ventilation openings in the unit casing or in the built-in structure free of obstacles. · Keep the appliance stable on the ground or in the car; Do not drain upside down.
Caution · Repairs may only be carried out by qualified personnel. Incorrect repair may
cause danger. The lamp and supply cord must be replaced by the manufacturer or qualified persons. · The installation of DC power in a boat must be handled by qualified electricians. · Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. · The appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they’ve been given supervision or instruction concerning use of the device in a safe way and understand the hazards.
3

Notice · Disconnect the power supply before each cleaning and maintenance and after every
use. · Do not use sharp tools to defrost; Do not damage the refrigerant circuit. · Risk of child entrapment. Before you throw away your old refrigerator or freezer:
take off the doors: leave the shelves in place so that children may not easily climb inside. · Check if the cooling capacity of the appliance is suitable for storing the food or medicine. Food may only be stored in its original packaging or in suitable containers. · If the appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance. · The appliance is intended to be used in household and similar applications such as: · Staff kitchen areas in shops, offices and other working environments; · Camping, Farm houses and by clients in hotels, motels and other residential
environments; · Bed and breakfast type environments; · Catering and similar non-retail applications. · Information, illustrations and specifications in this manual reflect the most current available at the time of publication,are subject to change without prior notice. · Due to the flammable refrigerant and blowing gas contained in the device, comply with local regulations for disposal.
BEFORE FIRST USE
Prior to using your product, please read all the safety and operating instructions thoroughly. Please ensure you follow the steps below before using the product. We recommend you keep the original packaging for storing the product when not in use. Please pay close attention to the section entitled Warnings & Safety Information. Find a safe and convenient place to keep this instruction manual for future reference. Unpack the product but retain all packaging materials until you are satisfied that your new product is undamaged and in working order. Ensure you have all accessories listed in this manual.
4

FEATURES · Intelligent battery protection system. · Removable wire rack to adjust inner space · Flexible drawer design. · DC power connections · High- efficiency DC compressor and conversion module · Dual mode operation (Max & Economy) · Digital temperature display with adjustable control · 3 Year Warranty · 3-stage low voltage battery protection · APP control Via Bluetooth
BOX CONTENTS 1 x Drawer Fridge / Freezer 1 x 12/24V Car Cigarette Power Lead
PRODUCT DIAGRAM
5

PRODUCT DIMENSIONS
OPERATION
1. Display Screen Initialization: connect to DC 12V/24V power or AC 100-240V power (with an optional adapter), the buzzer will make a long beep, and the display will light up for 2 seconds then enter the normal operating mode.
2. Power On/Off : Press ” ” to switch ON/OFF. 3. Temperature Setting: Press ”

• ” or ” – ” for temperature setting. Range:-20°C-
  +20°C. 4. Cooling Mode: Press ” ” to choose HH (Fast cooling) or EE(Energy- saving).
  *Factory setting is HH.
  6

5. Battery Protection Mode: Long press ” ” for three seconds until screen flashes, then select three battery protection modes H(High), (Middle) and L(Low) by clicking ” “. (Factory setting is H)
From left to right: L/M/H
Due to the different output voltages between vehicles, H should be set when the product is connected to car power, and M or L should be set when it is connected to a portable battery or other back-up battery. The battery gear should be set from H to M or from M to L if there is a voltage protection code F1 shown on the panel. The battery gear should be set to H if the product keeps working after turning off the car engine, or the product may drain the battery. Three Level Battery Protection Voltage Reference
The voltage is theoretical value, there may be a deviation in different sceneries. 6. Temperature Unit Setting: Turn off the fridge then long press ” ” until displays
E1, keep pressing ” ” until displays E5, and press” + “or” – “to select Celsius or Fahrenheit. 7. Reset: Switch off the fridge, keep pressing ” ” until E1 displays, then press” + ” and ” — ” at the same time until displays as below:
INSTALLATION 1. Ensure that the refrigerator is not damaged when opening the packaging after
receiving the product. Any transportation damage must be reported promptly to the reseller. Handle the product with the utmost care and attention. 2. Install the fridge carefully to avoid damage. The fridge dimension is 698440250mm, there should be enough back space (50mm minimal) and side space (10mm minimal) to keep good ventilation.
7

TROUBLESHOOTING

ISSUE Refrigerator does not work
Refrigerator compartments are too warm

SUGGESTED REMEDY
· Check if the switch is on. · Check if the plug and socket are connected well. · Check if the fuse has been burnt. · Check if the power supply is malfunctioned. · Switch on/off the fridge frequently may cause start delay of
the compressor
· The lid is opened frequently. · A large amount of warm or hot food was stored recently. · The refrigerator has been disconnected for a long time.

Food is frozen There is “water flow” noise from inside the refrigerator There are waterdrops around the refrigerator casing or door gap The compressor is slightly noisy when starting Code F1 displayed
Code F2 displayed
Code F3 displayed
Code F4 displayed
Code F5 displayed
Code F6 displayed
Code F7 or F8 displayed

The temperature was set too low
It’s a normal phenomenon, caused by the flow of refrigerant.
It’s a normal phenomenon, the moisture will condense to water when it touches a cold surface of the refrigerator.
It’s a normal phenomenon, the noise will be reduced after the compressor works stably.
Possible cause: low voltage to fridge. Adjust the battery protection from High to Medium or from Medium to Low.
Possible cause: condenser fan is overloaded. Disconnect power to fridge for 5 minutes & re-start. If the code shows again, contact manufacturer for service.
Possible cause: the compressor starts too frequently. Disconnect power to fridge for 5 minutes & re-start. If the code shows again, contact manufacturer for service.
Possible cause: compressor not kicking in. Disconnect power to fridge for 5 minutes & re-start. If the code shows again, contact manufacturer for service
Possible cause: overheating of the compressor & electronics. Disconnect power to fridge for 5 minutes & re-start. If the code shows again, contact manufacturer for service.
Possible cause: no parameter can be detected by the controller. Disconnect power to fridge for 5 minutes & re-start. If the code shows again, contact manufacturer for service.
Possible cause: temperature sensor is faulty. Contact manufacturer for service.

8

CLEANING, CARE, STORAGE & MAINTENANCE
WARNING: Never use hard or sharp tools to remove ice or to loosen objects frozen in place.
Cleaning · Unplug the device first to avoid electric shock. · Use wet cloth to clean the device and dry it. · Remove the cover and drain from the hole at the bottom of the device. · Do not soak the device in water and do not wash it directly. · Do not use abrasive cleaning agents as these can damage the device. Storage · If the device will not be in use for a long time, please follow the steps: · Turn off the power and remove the plug. · Remove all the items stored in the device. · Remove the cover and drain from the hole, wipe off excess water with a soft rag. · Leave the lid slightly open to prevent odour formation. · Put the device in a cool and dry place. Defrosting · Humidity can form frost in the interior of the cooling device or on the evaporator,
which will affect the cooling performance. Defrost the device regularly to avoid this. · Switch off the device. · Take out the contents of the device. · Keep the lid open. · Remove the cover and drain from the hole. · Wipe off the defrosted water.
9

SMART CONTROL – FRIDGE APP INSTRUCTIONS
TM TM
(Battery is not supported on this model)
TM
10

SPECIFICATIONS
Input Voltage
Average Power Consumption Power Consumption Rated Current for AC (Adaptor) Rated Current for DC Temperature Range Refrigerant Insulation

12/24V DC (To power from mains use the optional 240V AC to 12V DC power adapter) 60W 0.28kw.h / 24hr 1.5A -0.7A 5.0A(12V) / 2.5A(24V) -20°C to + 20°C (with ambient temperature at 25°C) R134a 100% CFC & HFC Free PU Foam Insulation

FOOD STORAGE
Freezer (-4° F~32° F)(-20°C~0°C): · Meat should be cut and packed properly when placed in the fridge. · Do not put the fresh food and frozen food together. · Do not store glass containers or other containers which seal in liquid in the freezer,
to avoid explosion.
Refrigerator (32° F~50° F)(0°C~10°C): · Egg, butter, milk and bottle drinks can be stored. · All food should be packed appropriately before being stored in the fridge. · Place food in refrigerator after it gets cool in order to save energy.

11

WARRANTY INFORMATION Our product is guaranteed to be free from manufacturing defects for a period of 3 years. If your product becomes defective during this period, Electus Distribution will repair, replace, or refund where a product is faulty; or not fit for intended purpose. This warranty will not cover modified product; misuse or abuse of the product contrary to user instructions or packaging label; change of mind and normal wear and tear. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and failure does not amount to a major failure. To claim warranty, please contact the place of purchase. You will need to show receipt or other proof of purchase. Additional information may be required to process your claim. Any expenses relating to the return of your product to the store will normally have to be paid by you. The benefits to the customer given by this warranty are in addition to other rights and remedies of the Australian Consumer Law in relation to the goods or services to which this warranty relates.
Electus Distribution Address 46 Eastern Creek Drive, Eastern Creek NSW 2766 Ph. 1300 738 555

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>