Edifier MP280 Portable Speaker with microSD, Bluetooth User Manual
- September 3, 2022
- Edifier
Table of Contents
Edifier MP280 Portable Speaker with microSD, Bluetooth
Specifications
- BRAND: Edifier
- SPEAKER TYPE: Outdoor
- CONNECTIVITY TECHNOLOGY: Bluetooth, Auxiliary, USB
- MOUNTING TYPE: Plug Mount, Freestanding
- CONTROLLER TYPE: Battery Powered
- BLUETOOTH: 4.0
- RANGE: 32 feet.
- PLAY TIME: 10 hours
- PRODUCT DIMENSIONS: 7.09 x 2.36 x 2.36 inches
- ITEM WEIGHT: 1.76 pounds
- BATTERIES: 1 Lithium Ion battery
Introduction
Wirelessly link your phone to the MP280 portable speaker using Bluetooth 4.0 technology. High-quality playback is available up to 10 meters (32 feet) using Bluetooth 4.0. The reflective cone structure is used by the cylindrical design to create an amazing look that epitomizes luxury. You can only anticipate the greatest sound when using professional-grade audio DSP chips. The long-lasting lithium-ion battery can run continuously for up to 10 hours. It is Ideally suited for a weekend getaway. Is the battery on your phone becoming low? Use the MP280 as an emergency charging station to keep your phone powered on and to simultaneously play your favorite music. The MP280 offers up to 10 hours of continuous listening thanks to the strength of the lithium battery, making it an excellent speaker for camping trips and traveling.
HOW TO USE
- By pushing the Bluetooth button on the remote control or the master volume control on the back panel of the active speaker, you can turn on the speaker and enter Bluetooth mode.
- On your source devices (mobile phones, tablets, etc.), go to the configuration area.
- Connect your device to “EDIFIER MP280.”
HOW TO CONNECT
Bluetooth makes it simple to connect any device to Edifier’s speakers. Having a Bluetooth 4.0 speaker system with a reception range of up to 30 feet makes it simple to deliver clear sound even at a distance. Reduce the amount of wires that are flowing through your house or business by connecting over Bluetooth.
HOW TO MAKE SPEAKER SOUND BETTER
- Put your wireless Bluetooth speaker on the floor. Consider the size of the room. It is preferable to use two wireless bluetooth speakers.
- Maintain Your Wireless Bluetooth Speaker. Place the Wireless Bluetooth Speaker Near Walls. The Internet.
HOW TO INCREASE THE BASS
The location of a Bluetooth or wireless speaker also significantly affects how well the low frequencies are reproduced. By positioning the speaker up against a wall or, much better, in a corner indoors, you can easily increase the bass. The low frequencies will be reflected and amplified artificially by the wall.
Frequently Asked Questions
My Edifier speakers won’t connect; why?
Consider returning the Bluetooth chip to its default settings. To allow the capacitors to completely discharge, kindly disconnect the speakers for at least ten minutes. Reconnect the speakers’ power, choose Bluetooth as the input method, then pair your device with the speakers.
Are Edifier speakers receiver-required?
AMPLIFIER OR RECEIVER IS REQUIRED. To suit your tastes, connect an amplifier or receiver to these speakers. Speaker wires are present.
Where in a room should portable speakers be placed?
You can hear that the speaker produces more bass when it is placed on the floor in the center of the room as opposed to when it is placed on a table. Additionally, it will probably sound flat and lackluster down there. To produce even more bass, try placing the speaker on the floor in a corner.
Without a remote, how can I switch on my Edifier speakers?
By turning the control speaker’s volume knob, you can change the inputs. The various inputs will cycle through as a result.
Why does one of my Edifier speakers only function?
Verify that the connected device and the speaker are both turned on. Increase the speaker’s and the connected device’s loudness. Verify that the plugged-in device is playing music. When playing back in BLUETOOTH mode, be sure the audio cable is unplugged from the AUDIO IN jack.
Can Edifier speakers accommodate a subwoofer?
You can connect the subwoofer output of your PC to the Altec if it has an orange audio jack. The Edifiers should be plugged into the green audio jack and the PC should be set to 2.1 operation. Without an amp to drive it, the passive subwoofer is inoperable.
The Calibre of Edifier?
Let’s start with the positives: These speakers are excellent value. These are an excellent purchase if you’re searching for a sturdy, pleasant-sounding bookshelf speaker that you can plug directly into your PC or TV and that will fill a room with rich sound.
Can I directly connect speakers to my TV?
Typically, no. Only active speakers with an integrated amplifier can be connected directly to a television. For instance, since the majority of soundbars are active, you can use optical or HDMI ARC to connect them directly to a TV.
Can I use my TV with a Bluetooth speaker?
Go to Network Settings on your television and choose Bluetooth. Next, check the list of discoverable devices for your speaker. Hopefully, this straightforward connection approach worked.
How are speakers with poor sound repaired?
Speaker wires should be changed. Connect a separate set of speakers if necessary. Low volume may also be the result of an additional device, such as a Set-top Box (STB) or television, being connected to one of the input sources. Make sure your source is securely connected to the A/V receiver by checking the connection.