Onninen CZL543 Pole Mounted Luminaire Onnpark Town Instruction Manual
- June 14, 2024
- onninen
Table of Contents
Onninen CZL543 Pole Mounted Luminaire Onnpark Town
Product Information
Specifications
- Model number: CZL543
- Supply Voltage: Not specified
- Protection class: Not specified
- Type of wiring: Not specified
- Power consumption: 40 W, 30 W, 20 W, 12 W
- Color temperature: 3000 K, 4000 K, 5000 K
- Luminous flux: 2850 lm, 2250 lm, 1550 lm, 1000 lm (at respective color temperatures)
- Color rendering index: Not specified
- Degree of protection: Not specified
- Impact strength: Not specified
- Housing color: Not specified
- Dimensions: Not specified
- Weight: Not specified
- Working Temperature: Not specified
- Storing Temperature: Not specified
- Max. number of luminaires per miniature circuit breaker: Not specified
Product Usage Instructions
Important Safety Instructions
Before using the Pole Mounted Luminaire Onnpark Town, please read and follow these safety instructions:
- Switch off the power supply before installation.
- Switch on the power supply only after complete installation and examination of the circuit.
- Installation and maintenance should be done by a professional electrician.
Turn Off Power Supply
Before starting the installation process, make sure to turn off the power
supply to ensure safety.
Installation Instructions
Follow these steps to install the Pole Mounted Luminaire Onnpark Town:
- Step 1: Prepare the installation area and ensure there is a 60mm pole available.
- Step 2: Switch off the power supply.
- Step 3: Install the luminaire on the pole according to the provided dimensions and instructions.
- Step 4: Once installed, examine the circuit and ensure everything is properly connected.
- Step 5: Switch on the power supply and test the luminaire.
FAQ
Q: What is the power consumption of the Pole Mounted Luminaire Onnpark
Town?
A: The power consumption options are 40 W, 30 W, 20 W, and 12 W.
Q: What are the available color temperatures of the luminaire?
A: The available color temperatures are 3000 K, 4000 K, and 5000 K.
Q: Is a professional electrician required for installation and
maintenance?
A: Yes, it is recommended to use a professional electrician for
installation and maintenance purposes.
SPECIFICATION PARAMETER
| Model number | CZL543 / 4548175 |
|---|---|
| Supply Voltage | 100-240V~, 50/60 Hz |
| Protection class | Class I |
| Type of wiring | Cable 6.0 m H07RN-F 3 x 1.5 mm2 |
| Power consumption | 40 W (30 W / 20 W / 12 W) |
| Color temperature | 3CCT: 3000 K / 4000 K / 5000 K |
| Luminous flux | 3200 lm |
| Color rendering index | CRI > 80 |
| Degree of protection | IP66 |
| Impact strength | IK09 |
| Housing color | Black (RAL9017) |
| Dimensions | Ø 371 x 420 mm |
| Weight | 5.4 kg |
| Working Temperature | -30°C… +50°C |
| Storing Temperature | -40°C…+70°C |
Max. number of luminaires per
miniature circuit breaker
| B10: 12
C16: 32
Lumen output| 3000 K| 4000 K| 5000 K
CZL543
| 40 W| 2850 lm| 3200 lm| 2950 lm
30 W| 2250 lm| 2400 lm| 2300 lm
20 W| 1550 lm| 1650 lm| 1600 lm
12 W| 1000 lm| 1050 lm| 1050 lm
Important safety instruction
To ensure correct function and safety, please read and follow all instruction
carefully before using the product,
Basic safety precautions should always be followed when installing, including
the following:
- Turn off power supply before installation or before doing any maintenance, cleaning, changing the globe or adjustment to the fitting.
- Do not install any luminaire near the heat source.
- IP grade please refer to product label, only IP54 can be used in wet or damp locations.
- Do not exceed the nominal supply voltage or amperage ratings.
- All wiring and installation of the light fitting must adhere to local and national wiring rules.
- Take care not to pull any electrical wires during unpacking as this may damage the connection.
- Lay out all the components on a smooth surface and make sure there are no components missing before assembling.
- To avoid injury or damage to the fitting, please ensure that power leads and screws are secure before connecting the power.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- The light source or driver contained in this luminaire shall only be replaced by the manufacturer or other qualifified person.
- Please keep instruction for future reference.
Warning:
- Switch off before installation.
- Switch on only after complete installation and examination of the circuit.
- Professional electrician for installation and maintenance only.
Installation Instructions
3 CCT+4 Power
This symbol on products and or accompanying documents indicates that used and end of life electrical and electronic equipment should not be disposed of in household waste. For the proper disposal, treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources and prevent any potential adverse effects on human health and the environment which could otherwise arise from inappropriate waste disposal and handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation.
Manual instructions material
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>