EMERSON KR8-315 Series Embedded Platform User Guide
- June 5, 2024
- Emerson
Table of Contents
EMERSON KR8-315 Series Embedded Platform
What’s in the box?
Make sure you receive all items of your shipment:
- One KR8-315 Series enclosure
- One power adapter
- One mounting adapter
- One cable mounting tie
- Screws
- One printed copy of Quick Start Guide (this document)
- One printed copy of Safety Notes Summary
- Any other optional item that you ordered
When installing or servicing the enclosure or accessories, strictly observe the safety precautions in the Safety Notes Summary. Otherwise, personal injury or property damage may occur.
Prepare the installation site
- The KR8-315 series has three variants KR8-315, KR8-315-ET and KR8-315E. For information on the environmen-tal and power requirements of the three variants, see the KR8-315 Series Installation and Use manual.
- The KR8-315 Series must be in good condition, without defects such as oxidation, chemical corro-sion, missing components, or trans-portation damage.
- Confirm the position where the KR8-315 Series will be installed.
VESA mounting
- Fasten the 4pcs M3 shoulder screws to enclosure.
- Install the mounting adapter to back of monitor, using the 4pcs M4x10mm screws.
- Mount the enclosure to the adapter fastened on the monitor.
The above shown mounting direction is recommended for best efficiency of heat dissipation.
Wall mounting
- Fasten the 4pcs M3 shoulder screws to enclosure.
- Install the mounting adapter to the wall, using the 4pcs M4x10mm screws.
- Mount the enclosure to the adapter fastened on the wall.
Finding more information
For more information on the product, see the KR8-315 Series Installation and Use and other related documentation. Go to www.artesyn.com/computing/support/ product /technical-documentation. php for technical documentation.
Technical Assistance
To request technical assistance, visit our Web site https://www.artesyn.com/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>