AULA F98 3 in 1 HOT-Swappable RGB Gasket Mechanical Keyboard User Guide
- August 8, 2024
- AULA
Table of Contents
AULA F98 3 in 1 HOT-Swappable RGB Gasket Mechanical Keyboard
Description
2.4G Connection instructions
- Switch to [ON]
- Remove the [USB Receiver] from the upper right corner slot of the keyboard
- Plug into your computer’s USB port to use
′~ key cyan light slow flashing, then long press FN + ′~ key cyan light fast flashing into the code state, then insert the receiver to complete the code, ′~ key cyan light 2s, 2.4G link successfully. Note: 2.4G connection first search before inserting the receiver. The factory default has been coded.
BT Connection Instructions
- Switch to [ON]
- Long press the key combination”FN+1″ for about 5 seconds the “1” key starts fast flash a blue light, into the code pairing state.
- Search for the pairing name[AULA-F98], the blue light will turn on for 2 seconds after the connection is successful.
Note:
BT2 and BT are connected in the same way as BT1, BT2 can be connected by
pressing the combination key [FN+2@]. BT 3 can be connected by pressing the
combination key [FN+3#]: The blue light blinks slowly when BT is connected
again.
Wired Mode
- Switch to [ON]
- Plug the Type-C cable into the port on the keyboard
- Plug another USB into your computer’s USB port
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>