AULA F87 3 In 1 Hot Swappable RGB Gasket Mechanical Keyboard User Manual

AULA F87 3 In 1 Hot Swappable RGB Gasket Mechanical Keyboard

Keyboard Function

Keyboard Function(3-Mode Connection Version)

1. CAPSLOCK  USB Receiver
2. Type-C port
3. Mode Switch(2.4G/Wired/BTI
4. RGB Light Strip/Battery Indicator

• Stylish exterior design, 87-key layout. GASKET structure. delicate and soft hand feeling.
• Keycaps and mechanical switches are pluggable, and users can also purchase switches and personalized keycaps for free DIV.
• The keyboard is made of solid materials and the keys are responsive.
• Dual adjustable foot support, hidden receiver storage.
• Return of rate:125Hz.
• All keys anti-ghosting for all connection modes.

Wired Mode Turn ON/OFF

1. Switch to DJS B/OFF] mode
2. lug the Type-C cable into the port on the keyboard
3. Plug another USB into your computer’s USB port

Instructions for switching on and off

• Turn the mode switch to USB/OFF(not plugged into the USB power supply). the keyboard is turned off and the built-in  The battery stops powering the keyboard.

2.4G Connection Instructions

1. Switch to [2.4G] mode
2. Remove the [USB Receiver] from the upper right corner slot of the keyboard.
3. lug into your computer’s USB port to use

Short press FN +’ into 2.4G Mode

• Manual pairing: Long press the key combination “FN+’ ‘ for about 3 seconds, and the key” ‘ starts fast and flashes cyan light, keyboard enters a code pairing state. At this time, plug the USB receiver into the USB port of your computer. Then finished.

BT Connection Instructions

1. Switch to [BT] mode.
2. Long press the key combination “FN+ 1” for about 3 seconds, and the “1” key start fast flash cyan light, into the code pairing state..
3. Search for the pairing name [AULA-F87 Pro 3.0] or [AULA -F87 Pro 5.0], the blue light will turn on for seconds after the connections are successful.

Quick Mode Switching with Key Combo

• In BT mode, a keyboard can be connected to three devices.
• Short press FN + 1 /2/3 to switch to BTl /BT2/BT3.
• In BT mode, the keyboard battery level can be displayed on the computer

Backlight Effect Adjustment

Backlight Effect Key Combo Adjustment

• Use 10 different music rhythm RGB light effects with the driver

RGB Light Strip Adjustment        RGB Sidelight Adjustment

OS Switching

• FN+WIN=Lock/Unlock WIN key (in WIN system, when locking WIN key indicator light is always on, WIN key can not be used).
• Under the Windows system, if you switch to MAC/1OS system mode, the position of WIN and ALT keys will be exchanged, and F1-F12 are the multimedia function buttons

Combo Key Description

• FN+ ESC long press for three seconds = restore default state, connected BT devices will not be cleared

FN+Q switch to Android system mode (Q key red light flashes 3S), F area single press function and F area FN combination function

FN+W switch to WINDOWS system mode (W key red light flashes for 3s), F area single press function and F area FN combination function

FN+E switch to MAC system mode (E key red light flashes 3S}, F area single press function and F area FN combination function

FN+R switch to 10S system mode (R key red light flashes 3S}. F area single press function and F area FN combination function

Indicator light Description

Press and hold FN to view the current link mode (2.4G, BT. wired); current BT channel (channel 1/2/3) Current system mode (android, Win, mac, ios) Press and hold FN, the keys corresponding to the above different keyboard modes will light up, release FN to restore the normal lighting effect.

• 2.4G mode corresponding key indicator=”~” key
• Wired mode corresponding key indicator = “4” key
• BT channel corresponding key indicator= ” 1,2,3″ key
• Operation system mode key indicator= ‘QW,E, R”

Intelligent Standby Mode Description

• BT /2.4G mode automatically enters power-saving mode (lights off) after one minute without any operation, and wakes up the keyboard by clicking a key.

Charging Instructions for Use

• Connect the keyboard to the computer via the provided USB cable to charge the keyboard. The RGB ambient light bar streamer shows when charging, and the green light stays on when fully charged. In 2.4G/BT mode (no USB plugged in), the RGB ambient light bar can display the keyboard power by FN+B. The green light shows when fully charged. As the power is consumed, the green light gradually decreases, and the low battery indicator turns red. Type-( connectivity is more reliable and performance is more table

1. It is recommended to use only the computer USB port to charge the keyboard
2. Do not use fast-charging cell phone chargers to charge the keyboard.
3. Do not use inferior non-standard power adapter tt: I charge the keyboard
4. Do not use an over-volt. lge and an ever-current power adapter to charge the keyboard.
5. Please keep away from high-temperature equipment when charging
6. Please turn off the power switch if it is not used for,11 long time.

Charging instructions

The above charan Instructions also apply Ml other develops with charging function (keyboard/mousse/headphone

Product Parameters

• Number of keys: 87
• Total travel: 4.0mm
• FN multi-function key
• Size: 365.90×139.00×41.10±1mm
• Charging voltage, current: DC sv 600mA
• Rated voltage: DC 3.7V fully charged 4.2V
• Battery capacity: Rechargeable lithium battery
• Rated current: [email protected] ( default lighting) 15 mA( turn off all the lights.)
• Charging interface: type-c interface

• Computer system requirements
  • Wired, 2.4G mode: Support WINDOWS ALL operating systems (XP,
  • WIN7, WIN8, WIN10), under WIN95, and WIN98 systems, drivers may be required.
  • Wired Mode/2.4G Receiver: Configured with USB version 1.1 or above interface.
  • BT Device Name ‘AULA-F87Pro 3.0″: WIN? and lower systems
  • BT Device Name “AULA-F87Pro 5.0”: WINS, WIN10 and above.
  • BT Mode: MAC computer with BT BT3.0, BLE4.0, BLE5.0 and above hardware, Android phone or tablet, 1OS phone or tablet.

Hardware connection
The wired USB/2.4G receiver supports hot-swapping (plug and play).

CONTACT

• Dongguan Suoai Electronics CO.,LTD
• www.aulastar.com
• SOAI Industry Park, Huayu Street Changlong
• Village Huangjiang Town Dongguan City
• Guangdong Province
• Execution Standard: GB/T 14081-20 10
• Made in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>