AULA F99 Wireless Keyboard Instruction Manual
- June 6, 2024
- AULA
Table of Contents
AULA F99 Wireless Keyboard
Functions and Indicators
Product Features
- Stylish design with Gasket construction and a fine, soft and flexible feel Keycaps and mechanical switches are pluggable.
- 4000mAh*2 large-capacity lithium battery can be recharged, with a power switch, environmental protection and energy saving, saving worry and money, effectively extending battery life.
- FN+| key combination to switch between 15 RGB light effects With the drive with music rhythm RGB lighting effect, there are 5 lighting effect modes to choose from under this lighting effect.
- Cooperate with the drive keys with custom functions and macro definitions.
- Humanized design of the keyboard, adding a series of commonly used shortcut
Specifications
- Connection: Type-C wired & 2.4G wireless & BT
- Number of keys: 99 keys
- Pluggable mechanical switch
- RGB switchable lighting effects
- Lithium battery: rechargeable lithium battery4000mAh*2
- Charging voltage/current: DC 5V/ ≤ 830mA
- Rated voltage: DC 3.7V
- Dimensions: 390.63(L)x146.78(W)x42.57(H) #0.5mm
- Weight: 1183g
- Operating system: WIN XP7/8/10/Android/IOS/MAC
Description of shortcut keys (you have to switch to the corresponding mode FN+’~/1/2/3 in the upper left corner to be able to long press on the code)
FN+Q=Android system (Q button red light flashes for 3s), F area single press function and F area FN combination function.
FN+W=Windows system (W key red light flashes for 3s), F area single press function and F area FN combination function.
FN+E=Mac system (E button red light flashes for 3s), F zone single press function and F zone FN combination function.
FN+R=10S system (R key red light flashes for 35), F-zone single press function and F-zone FN combination function.
Operating Instructions
2.4G mode:
The upper left switch is dialled to 2.4G mode, the cyan light of the ‘~ key
blinks slowly, and then press the FN+ ~ key for 3 seconds to enter the code
pairing state, then plug in the receiver to finish the code pairing, the cyan
light of the ‘~ key is on for 2s, the 2.4G connection is successful. The
factory default has been pairing code.
BT Mode:
Top left switch toggle to Bluetooth mode BLE5.0/BLE3.0 (device name AULA-F99
3.0/AULA-F99 5.0), can connect 3 devices:
- FN+1=BT 1, the blue indicator light under the key is flashing fast, back to the connection is flashing slowly, and the blue light is on for 2s when connected.
- FN+2=BT 2, the blue indicator light under the key is fast flashing, back to connect slow flashing, connect to blue light 2s.
- FN+3=BT 3, the blue light under the key is flashing fast, back to connect the slow flash, connect the blue light 2s.
Wired mode:
Top left switch to centre position = wired mode, white light on “4” button
lights up for 2s.
- En+Esc long press for three seconds = Restore default. The original connected BT device save will not be cleared.
- FN+Shift-R=Switch light bar light mode, FN+/? = switch light bar colour; FN+Alt-R= light bar brightness cycle, FN+CtrI-R = light bar speed cycle.
- Fn+↑=Brightness+ Fn+↓=Brightness- Fn+←=Speed- Fn+→=Speed+.
- FN+Q=Android, FN+W=Windows, FN+E=Mac, FN+R=IOS.
- Fn+ Tab=Toggle light effect colour.
- Fn+WIN-L=Lock/open left WIN window key (Lock WIN indicator light is always on when locking WIN, under WIN system).
- After switching to the Mac/lOS system, the WIN-L/ALT-L position is swapped (without locking WIN).
- FN+B=RGB ambient light bar can show keyboard power level, charging streaming light display. Full long bright green, 5 lights each green light indicates 20% battery. Low battery all red indication.
Charging Instructions
- It is recommended to use only the computer USB port to charge the keyboard.
- Please do not use fast-charging mobile phone chargers to charge the keyboard.
- Please do not use the inferior non-standard power adapter to charge the keyboard
- Please do not use the over-voltage and over-current power adapter to charge the keyboard.
- When charging, please keep away from high-temperature equipment.
- The indicator light is on when charging, and the indicator light is off when fully charged.
- Please turn off the power switch when not in use for a long time.
The above charging instructions also apply to other devices with charging capabilities (keyboard/mouse/headphones/speakers, etc.)
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used under the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.